Kipon Canon EF/EF-S to Fuji X Series Camera Lens Adapter (With Aperture Control Ring)

2019-09-08T13:42:17

This adapter did not work with my Canon EF lenses. It fit my X-T3 correctly, but the lenses would not lock into place. Looking into the adapter, I could see that the lens contact points were rubbing on a flange inside it and trying to force the lenses to rotate until fully locked would result in damage to the lens. I returned it for a full refund.

Ephraim P.

2018-09-23T09:31:38

I use manual Nikon lenses on my fuji as cinema lenses. This is great when i need that little extra width and light, esspecially with something like my 25mm f2.8. The edges get a little soft, but as long as you understand the limitations (don't use if you have action on the edge of the shot) then this is a great tool, and cheaper than any of the alternatives.

Michael F.

2018-08-20T09:04:36

The aperture control Rin is *jey* to this adapter in that it's made of so many blades (I didn't even try to count) that it's essentially a perfect circle which means (in part) better bokeh than the native Canon EF lens itself. If you're a Fuji rangefinder person *and* you have Canon EF lenses around and you're wondering what to do with them, this adapter is your answer.

Peter S.

2018-04-30T12:41:50

Mechanically nice, solid fit and locks are well made. It is at a lower price than other adapters, but I found the image quality when not center frame to be poor. Soft, distortion chromatic abberation is substantial. I returned this and went for the Mitakon series 2. It's a little more in price but image quality is much better.

TIMOTHY K.

2018-02-28T15:39:44

I used the adapter to mount a voigtlander 75 mm to a Fuji X Pro 2. The close focus adjustment ring worked great. Looks like the Lens focuses about half again closer

JOHN F.

2018-02-27T12:35:34

All metal and solid, no drawbacks from sharpness at all. Even the release lever for the lens is well built.

Cornell C.

2018-02-20T08:20:06

The adapter would fit on my Leica and Voightlander lenses (I tried several of each), but it would not grip.The lens would fall off before I could get it mounted to the camera. And every touch of the lens also meant another chip in the finish of the adapter. I returned the adapter to Adorama for a full refund. Thank you, Adorama!

DR S.

2018-02-07T07:37:26

Glass element has chromatic aberration and loses image quality. Has a blurry effect on overall image.

Tou Y.

2017-10-15T11:15:43

I use it with the new voigtlander SL 40mm and 58mm, along with a Nikon 55mm 1.2 and Zeiss ZF 50mm 1.4 on a fuji xt-1. The lenses draw beautifully and I get fuji’s exceptional color redemption. It’s like I get to have my cake and eat it, too.

Jeremy J.