K-Array KR202 Redline Series Complete Powered Stereo System, 1x KMT18 Powered Subwoofer, 2x KK102 Speaker

SKU: KAKR202

This item is no longer available.

Overview
Compare
Specs
Q&A

Questions & Answers

Reviews about this item

Review Summary

K-Array KR202 Specifications

  • Acoustics: Speaker Power Handling

    KMT18: 800W
    KK102: 400W

  • Acoustics: Max Power

    KMT18: 1400W
    KK102: 800W

  • Acoustics: Impedance

    KMT18: 8Ohms
    KK102: Selectable (must be set at 32Ohms)

  • Acoustics: Frequency Range

    KMT18: 30Hz - 150Hz +/- 3dB (preset dependent)
    KK102: 150 Hz - 20 KHz.

  • Acoustics: SPL 1W / 1mt

    KMT18: 99dB
    KK102: 98dB

  • Acoustics: Maximum SPL

    KMT18: 138dB continuous - 136dB peak
    KK102: 124dB continuous - 130dB peak

  • Coverage: Horizontal

    KMT18: Omni
    KK102: 110 degree

  • Coverage: Vertical

    KMT18: Omni
    KK102: Selectable: 7- 35 degree

  • Crossover: Type

    KMT18: DSP controlled
    KK102: External Crossover required

  • Crossover: Frequency

    KMT18: 150Hz (preset dependent)
    KK102: High pass at 150 Hz, 24 dB/oct suggested minimum

  • Transducers: Full Range

    KMT18: 1x 18" Neodymium speakers with 3" voice coil
    KK102: 16 x 2" Neodymium magnet with 0.75" voice coil

  • Audio Input: Analog Connectors

    KMT18: 2 male + 2 female 3-pin balanced XLR
    KK102: 2 x 4-pin Speakon

  • Audio Input: Digital Connectors

    KMT18: 1 male + 1 female 3-pin XLR

  • Audio Powered Output: Connector

    KMT18: Female Speakon

  • Audio Powered Output: Wiring

    KMT18: Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C.

  • Remote Control Input: Connectors

    KMT18: 1 male + 1 female XLR parallel / 1 USB B Jack serial converter

  • Power Input: Connectors

    KMT18: 2x IN/OUT

  • Amplifiers: Type

    KMT18: 1 modules class D - DSP controlled

  • Amplifiers: Subwoofer Power

    KMT18: 1000 Watt at 8Ohms

  • Amplifiers: Speaker Power Output

    KMT18: 1000 Watt at 8Ohms
    Dynamic limiter, over current, over temp, short circuits

  • AC Power: Operating Range

    KMT18: 85 - 130V AC 60Hz / 190 - 240V AC 50Hz (Auto Switch)

  • AC Power: I. nom

    KMT18: 5.5A / 115V AC - 2.9 A / 230V AC

  • AC Power: Minimum Operation Voltage

    KMT18: 85V AC - 190V AC
    130V AC - 240V AC

  • AC Power: Max Continuous & Burst Current

    KMT18: 6A(>10 sec) - 12A (10 sec) - 20A (<1sec) at 85V AC - 190V AC

  • Dimensions

    KMT18: 18.31 x 18.7 x 24.02" / 46.51 x 47.5 x 61.01cm
    KK102: 3.19 x 39.4 x 2.32" / 8.1 x 100.08 x 5.89cm

  • Weight

    KMT18: 60.85lbs / 27.6kg
    KK102: 10.14lbs / 4.6kg

About K-Array KR202

The K-Array KR202 have three new integrated, self-powered speaker systems, featuring Mid- Hi line array elements matched to powered Subwoofers. All the systems feature two channels of class D amplification, housed in the sub-woofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol, also on an XLR for ease of cabling. An integrated touch screen provides intuitive managing and editing of powerful DSP controlling: Input and output levels, internally generated test signal, In/Out routing, subwoofer delay (up to 12 ms.), speakon output to the Mid-H element with delay (up to 12 ms.) and overall system delay (up to 330 ms.) All DSP functions, including EQ can be controlled with remote managing software via USB or RS485, again, conveniently on a standard XLR.

There are 40 different DSP presets, specifically made by K-array to optimize the systems' performance for the variety of device configuration available. In addition the user can also create, save and store his/her own personal presets on the module. The unique four-corner port configuration gives symmetrical back loading to the sub speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. Pocket handles in the sub and an M20 thread mount position for attaching mid-high speakers, with a variety of mounting and rigging hardware options make the latest additions to the K-array Redline Series very versatile in almost any application and in every type of venue.

It features a pair of KMT18 (18") subs each with 2 channels of 1000 Watts matched to two KK102 Mid-High arrays. A coupling assembly allows the speakers to be mounted side-by-side, giving the ability to vary the vertical dispersion pattern for narrow to wide coverage. All Redline systems are designed by the K-array R&D department and custom-made under the K-array quality control system.

K-Array KR202 Features

  • Unique performance-to-size ratio
  • Fitted with integral handles
  • Line array emission wavefront
  • DSP on-board with dedicated presets
  • Ultra fast set-up and dismantling system
  • Analog and digital AES-EBU inputs
  • RS485 and USB connectivity for remote control
  • Concert halls
  • Theatrical sound reinforcement
  • Houses of worship
  • Clubs
  • A/V systems
  • Cinema and special effects

What's in the box:

  • K-Array KR202 1x KMT18 Subwoofer
  • 2x KK102 Speaker
  • K-Array 1 Year Limited Warranty