This item is no longer available.
The Keencut Javelin-Integra range of precision cutter bars is designed to exceed the most demanding standards of accuracy. Javelin-Integra incorporates the unique design of the Javelin-Series 2 which allows Keencut technicians to factory adjust for straightness, using laser technology, to within 0.2mm over the 3.1 meter length of the cutter bar (1:15000). The accuracy of the Javelin-Integra makes it ideal for cutting banner materials, pop-ups and other display materials that require precise and accurate cutting for perfect alignment.
The Javelin-Integra features a mounted Javelin-Series 2 with integral Lift & Hold Levers on an Aluminum Base Plate. Javelin-Integra can be attached to an existing work table or a Keencut Proteus Bench to create a complete cutting station in your workshop.
The Javelin-Integra is supplied with three Vertical Blade Holders for optimum versatility enabling the operator to cut a wide range of materials up to an impressive thickness of 13mm. The patented linear bearings have been tested under load for 1600km (1000 miles) and carry a 20 year replacement guarantee. Three full length silicon rubber grip strips on the cutter bar and base plate ensure all work is clamped when cutting and also protect the surface of the material being cut.
The Keencut Javelin-Integra is ideal for cutting PVC Foamboard - Vinyl - Woven Fabrics - Foam Centered Board - Honeycomb & Corrugated Plastics - Film - Paper - Tissue and many more flexible and rigid materials.
Vertical Cutting Action
• Engage all blades on the Vertical Cutting Head using downward hand pressure
• Patented space age bearing and slide system designed for operator adjustment and minimal maintenance
Graphik Blade Holder Included As Standard
Accepts Keencut Graphik Blades designed specifically for the Signmaker and Digital Printer:
• Specially designed knife edge for extra stability in tougher materials
• Extend cutting depth up to 13mm
• Reversible - Set the blade to cut Left-Right or Right-Left
• Increased durability and reduced tip breakage
• Hard wearing & Oil-free
• 10 Graphik Blades included with each machine
Rotary Blade Holder Included As Standard
• Cold cut textiles and other delicate materials
• Ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive
• Comes fitted with red blade guard to be engaged when not in use for optimum safety
• A cutting mat is required (not supplied) when using the Rotary Blade Holder
Medium Duty Blade Holder Included As Standard
• Use standard off-the-shelf utility blades
• Adjust to a blade depth of 10mm
• Each machine is supplied with a pack of 100 Medium Duty Utility Blades
Blade Depth Adjuster
• Both the Medium Duty Blade Holder and Graphik Blade Holder feature quick height adjustment sliders
• Adjust the blade depth on the Medium Duty blade up to 10mm cutting depth
• Adjust the blade depth on the Graphik blade up to 13mm cutting depth
Blade Clamp
• All blade holders come with a single 'blade clamp knob' for quick adjustment
• A quick turn and the blade is unclamped for removal or adjusting cutting depth
Unique Features Of The Javelin Integra
• 3-Piece Base plate with integrated silicon strip to hold materials securely while clamped
• Lift-&-Hold System is perfectly balanced for ease of use
• Integral baseplate comes with full-length cutting groove for use with the Medium Duty Blade and Graphik Blade
• Base has angled rear edge for easy loading of material
Features & Performance
• Outstanding 1:15000 straightness accuracy guarantee making the Javelin Integra ideal for Pop-up banner displays
• With a lightweight base included the Javelin Integra is designed to fit onto any bench
• Comes as standard with three different types of Blade Holders: Graphik Blade Holder (1), Medium Duty Blade Holder (1) and the Circular Knife Blade Holder (1) to provide maximum versatility and cutting options
• Reverse the Graphik Blades (included) to set the machine to cut Left-Right, Right-Left or both
• Using the single tool cutting and included blade holders, switch between cutting different materials in seconds
• The new large diameter textile wheel improves performance and longevity - cutting mat will be required
• When heat cutting and sealing is required the Keencut Hot Knife Holder sliding head can be quickly attached with the appropriate electric Hot Knife and detached in seconds
• Fully equipped and ready to work with blades included
• Patented space age bearing and slide system designed for operator adjustment and minimal maintenance
• Available in four practical sizes, from 1.6 to 3.1 meters
Ease Of Operation & Safety
• Blade locking thumb screw adds safety & convenience
• Tools interchange quickly for maximum productivity
• Lift and hold mechanism enables the user to lift & load the cutter using levers at both ends rather than lifting the bar
• Spring loaded blade holders immediately retract when not in use
• Multiple integral full length grip cords hold work safe and sure while cutting
• Total dust free operation - safe to use near printers and plotters
• Circular knife supplied with blade guard to be engaged when not in use
Guarantees & Construction
• 100% manufactured by Keencut Technicians in England
• 99.98% of materials from the best suppliers in Western Europe
• High tensile aerospace aluminum alloy construction
• Super grade anodizing for lifetime good looks and function
• Designed specifically for the design & display industries
• 5 year comprehensive guarantee
• 20 year replacement guarantee on all slide bearings
Materials The Javelin Integra Will Cut
• Flag, banner, PVC Foamboard, foamcore, cardboard, corrugated plastic, polystyrene, flexible polycarbonate, flexographic plates, flooring tiles, magnetic sheet, film, self-adhesive materials and more