Kino Flo 2x Block/KF21 140Whr 28.8V NiMH Battery and Single Channel Fast Charger

--Block/KF21 Battery--
Kino Flo Lighting Systems partners with BlockBattery for newly introduced KF21 (NiMH) battery systems for its LED line. The Kino Flo/BlockBattery systems are designed to work with the following Kino Flo LED products with DC capability:

• Celeb 250 LED DMX
• Diva-Lite 20 & 30 LED DMX
• FreeStyle 31 & 21 LED DMX
• Select 20 & 30 LED DMX

The KF21 battery can power 28.8V (20-34VDC) applications. Run time for Kino Flo products listed above is approximately 1 hour and 10 minutes at full brightness. When fixtures are dimmed, the battery will last longer. Charge time is only 1.5 hours versus Lithium batteries that take approximately 4 hours to fully charge. Unlike lithium batteries, the Kino Flo/BlockBattery is also travel friendly with no travel restrictions. In addition to powering 28.8V, battery adapters may be used to access 14.4V to be used with products with 14.4V input. It's like having two batteries for the price of one!

--BAT-MM1 Mafer Mount--
The Kino Flo/BlockBattery system includes a Mafer Mount, BAT-MM1, with 28.8V output with 3-Pin XLR, 3ft. The battery slides onto the mount and mounts onto a Mafer clamp. The 3-pin XLR cable connects to the Select 20/30, Diva-Lite 20/30, FreeStyle 21/31 or Celeb 250 LED fixture.

--Charger--
The Single Channel Fast Charger utilizes BlockBattery's advanced microprocessor system and multi-level charge routines to quickly & safely, qualify, initiate and terminate charging of a nickel metal-hydride (NiMH) battery. It is designed to charge one Kino Flo/BlockBattery, BAT-KF21. The Charger System, BAT-BC1U, includes a Single Fast Charger and universal power supply, 120W/48V with 3-Pin XLR. Charge time is 1.5 hours. Charge cycle is complete when all 3 LED's are on steady.

Note:

For best long-term performance, avoid interrupting charge cycle during fast charge. Avoid "top-off" charging a full battery just before use. This is unnecessary and could elevate the voltage above equipment operating ranges and/or damage equipment being powered.