Kinefinity Accessory Core Kit for VISTA Camera

The VISTA ACC Core KIT is built for handheld shooting. Every accessory in this kit is chosen to keep the VISTA light, nimble, and comfortable in your hands - giving you a complete, ready-to-shoot setup without adding unnecessary bulk or weight.

- KineMAG CFexpress Type-B SSD -
The KineMAG CFe 512GB is a professional CFexpress Type-B storage card purpose-built for high-bitrate cinema workflows. With sequential read speeds up to 3,300 MB/s and write speeds up to 2,800 MB/s - and a sustained write speed of 800 MB/s - it delivers the continuous throughput needed to record ProRes and high-bitrate H.265 footage without interruption. Compatible with the Kinefinity VISTA and any camera or mirrorless system supporting the CFexpress Type-B standard.

Designed for VISTA
The KineMAG CFe is the recommended storage solution for the Kinefinity VISTA camera system. Its sustained write performance is tuned to match VISTA's ProRes and high-bitrate H.265 recording requirements, ensuring zero dropped frames even during extended takes. The standard CFexpress Type-B form factor also ensures broad compatibility with other professional cinema cameras and mirrorless systems that support the CFe Type-B standard.

RAID 5
The KineMAG CFe incorporates RAID 5 data-protection technology. RAID uses distributed parity information to recover data in the event that individual NAND Flash pages read incorrectly - a known failure mode of consumer and professional NAND alike. The KineMAG CFe's RAID 5 protection triggers automatically and transparently: your ProRes and H.265 footage is protected from the moment you press record, with no additional workflow steps required. Whether you're shooting long-form interviews, fast-paced action, or extended high-bitrate scenes, the KineMAG CFe 512GB provides the throughput headroom and data integrity that demanding professional productions require.

- CFexpress Type-B SSD Reader -
A fast, portable CFexpress Type-B card reader for quick footage offload from any CFe Type-B storage card, including the KineMAG CFe. Achieves full-card read speeds, dramatically reducing the time spent transferring high-bitrate ProRes and H.265 footage to your workstation. Includes both a USB-C cable and a USB-A compatible cable - ready to connect to any modern laptop or desktop without additional adapters.

- VISTA Side Handle -
Co-designed with Tilta, the VISTA Side Handle provides a natural, ergonomic grip extension purpose-built for the VISTA camera system. The angled grip geometry and textured surface deliver confident one-handed control during handheld shooting. Attaches securely to VISTA's body with zero-play fit, maintaining balanced weight distribution for extended shooting sessions.

- GripBAT 2Si Battery Set (2 x + 1 Charger) -
GripBAT 2Si is featured as 3500mAh/26Wh high capacity that is able to bear high current work. Compatible with NP-F550/F570, the GripBAT 2Si can be widely used with accessories such as wireless video transmitter, monitor, wireless lens control in the film industry. Moreover, its capacity is 75% higher than regular 2000mAh batteries in the market, strong power with long endurance.

Besides the super high capacity 3500mA, the battery cell and built-in PCB give GripBAT 2Si the ability to support high current and high load output, that means it supports continuous output current up to 5A and continuous output power up to 40W to meet harsh environment. Not limited to these, built-in PCB not only adds protections to regular overvoltage, undervoltage, overcurrent and over-temperature, but has the power to output continuous high current and protect higher overcurrent.

Extensive Applications
Benefiting from the broad use of NP-F series batteries in the film industry, such as SmallHD monitor, Atomos monitor, Movcam Wireless Lens Control, Wireless Video Transmitter and Receiver, and film lights from Aperture, Mangaung, etc., as well as the NBox livestream box and so on, the GripBAT 2Si with super high capacity is sure to work with above products. With the advantage of 75% higher than regular NP-F550 in capacity, the GripBAT 2Si is portable to use with enough electricity though its volume is a fraction of NP-F750!

The GripBAT 2Si also serves as an UPS power source for MAVO Edge 8K: The creative power solution can not only power the MAVO Edge independently, allowing for an efficient kit space utilization, but also work as UPS power source to supply uninterrupted power to the camera when replacing V-mount batteries or BP-U30 Type-Batteries.

Red and White Color Design
Though the GripBAT 2Si is compatible with SONY NP-F550/F570 battery, Kinefinity makes a creative design to the appearance of GripBAT 2Si. The red color and white color response with each other, which is feel of energy and has a distinguished recognition. With Kinefinity whole-new PD Hybrid Dual Charger, charging time for one GripBAT 2Si is only 60 min and for two GripBAT 2Si is only 90 min.

- HDMI 4K Cable (50cm) -
A compact, high-flexibility HDMI cable optimized for connecting the VISTA to an on-camera monitor. The ultra-soft, pliable cable body bends easily in tight rig configurations without stressing connectors or creating tension that disrupts neighboring accessories. Supports 4K 60Hz signal transmission for a sharp, latency-free monitoring image. Full-size HDMI Type-A connectors on both ends are reinforced for the repeated daily plugging and unplugging of a working set.

- Camera Strap -
A durable, adjustable camera strap designed for all-day carry with the VISTA and compatible mirrorless or cinema cameras. Features secure lug connectors for reliable attachment, a padded anti-slip shoulder section for fatigue-free carrying, and a quick-length-adjust slider to switch between neck and cross-body carry instantly.