KanexPro Flexible 1-Output 4K HDBaseT Card with De-Embedded PCM Audio, PoH

The KanexPro FLEX-OUT-HDBT4K is a seamless one output HDBaseT card with de -embedded PCM analog audio output designed for FLEX-MMX chassis supporting video resolutions up to 4K, 1080p/60 HD and PC resolutions up to 1920x1200 at 60Hz. The card is compliant to HDCP and supports EDID management from the switcher.

• Single one output seamless 4K HDBaseT card
• Stereo analog audio for audio de-embedding
• Requires an HDBASE70POER receiver to be paired
• PoC - powered over cable (Ethernet) from the switcher
• Supported resolutions: 1920x1200, 1080p & 3D
• Long CATx runs up to 230 feet (70 meters)
• Built-in HDCP internal management
• Built-in EDID & DDC management
• Controllable via RS232
• Plug & play, easily fits in to the FLEX-MMX series

Powered over Cable (Ethernet)
This flexible card requires a Receiver which can be remotely connected up to 230 feet to the HDMI display and supports PoC feature, which sends power over Ethernet (cable) to the receiver hence no, power supply needed.

Applications
Ideally used in command and control centers, simulation enters, large AV conference rooms for up-to-second viewing of critical information and high -resolution imagery.

Note:

1.For compatibility reasons do not combine or use 1080p based SDI, VGA or DVI cards with 4K HDMI & 4K HDBaseT cards on the same matrix chassis. The 4K cards are designed to work only on 4K based system delivering pure 4K resolutions and cannot be combined with any analog or 1080p card system.
2. HDBaseT Transceiver supports 4K &1080p 3D HDMI signal; please use quality HDMI cables compliant with HDMI2.0 for optimum range, resolution and performance.