Power Amplifiers
Save 5% Every Day† with the Adorama Edge Card. Learn More
Crown Audio DCi 4X300 DriveCore Install Analog 4-Ch 4x300W Power Amplifier
- Delivers 300W @ 8 Ohms for robust power amplification.
- Low THD ensures pristine audio fidelity, 20 Hz - 20 kHz.
- High signal-to-noise ratio: >108dB for clear sound.
- Input impedance: 10 kOhms balanced, 5 kOhms unbalanced.
- Damping factor >1000 enhances speaker control.
Special Order
Ashly Network Enabled 8-Channel Amplifier, 250W @ 100V & DSP
- High output power: 250W per channel at 100V.
- Signal-to-noise ratio: >98dB for pristine audio.
- Low THD ensures clear, accurate sound quality.
- Input impedance: 20k ohms, balanced for pro use.
- Damping factor: >250 for superior speaker control.
Special Order
Ashly PEMA Series Four-Channel 125W 70V Protea-Equipped Media Amplifier
- 4 Channel Power Amplifier: 125W at 70V output.
- Protea-Equipped Media Amplifier ensures clean audio.
- Reliable amplifier performance with built-in DSP.
- Flexible I/O: Euroblock connectors for easy setup.
- Durable build: 5-Year Warranty for peace of mind.
Special Order
Crown Audio DCi 2X600N Install Network 2-Ch 2x600W Power Amplifier w/ BLU Link
- High Output Power: 600W at 4 Ohms/8 Ohms.
- Signal-to-Noise Ratio: >104dB for pristine audio.
- Low THD: 0.35% ensures minimal sound distortion.
- Input Sensitivity: +20dBu maximum before compression.
- Damping Factor: >1000 for superior speaker control.
Special Order
Crown Audio DCi 2X1250N Install Network 2-Ch 2x1250W Power Amplifier, BLU Link
- High Power Output: 2x1250W into 2, 4, & 8 Ohms.
- Low THD: 0.35% ensures pristine audio fidelity.
- Signal-to-Noise Ratio: >104dB for clear sound.
- Input Impedance: 10kOhms balanced, 5k unbalanced.
- Damping Factor: >1500 for superior speaker control.
Special Order
Crown Audio CDi DriveCore 2-Ch 1200W Power Amplifier, Analog + BLU link Input
- Delivers 1200W of high power output per channel.
- Low THD ensures pristine audio amplification.
- High signal-to-noise ratio for clear sound.
- Optimized input sensitivity for gain control.
- Reliable protection circuitry prevents damage.
Special Order Item
Crown Audio CDi 2X1200 DriveCore 2-Channel 2x1200W Power Amplifier, Analog Input
- Delivers 1200W power amplifier output at 4 Ohms.
- Low THD ensures pristine audio signal fidelity.
- High signal-to-noise ratio: >104dB for clear sound.
- Versatile impedance matching: 2-16 Ohms dual mode.
- Reliable protection circuits ensure amp longevity.
Special Order
RDL ST-PA6 6W Mono Audio Power Amplifier
- 6 Watts RMS power amplifier output at 8 Ohms.
- Low THD+N ensures clean audio amplification.
- Balanced/unbalanced 100 kOhms input impedance.
- Frequency response: 35 Hz to 20 kHz (+/- 1.5 dB).
- Adjustable EQ boosts at 60/100/120 Hz.
Special Order
Ashly FA1.2RM Rackmount Kit for Single or Dual 1/2-Rack FA Amplifiers
- Rackmount Kit for Ashly FA Series Amplifiers.
- Securely mounts single or dual 1/2-rack amplifiers.
- Occupies only 1U rack space for efficient setup.
- Includes hardware for easy power amplifier installation.
- Ensures reliable mounting of your audio amplifier.
Special Order
JBL CSA180Z 80W Commercial DriveCore Amplifier
- 80W Power Amplifier: High power, low distortion.
- Commercial Amplifier: Reliable performance, 20Hz-20kHz.
- Versatile Inputs: Euro Block & RCA input options.
- Fanless Amplifier: Ensures quiet, efficient cooling.
- Low-Z/70V/100V Output: Broad impedance options.
Ships from Manufacturer
Studiomaster HX2-300 2x 225W at 4 Ohms 1U Digital Power Amplifier
- High Power Output: 2x225W at 4 Ohms for robust sound.
- Low Distortion: Ensures clean audio, THD+N at 0.02%.
- Reliable Performance: Overload/thermal/DC output protection.
- Versatile Input Options: Balanced and unbalanced inputs.
- Compact Design: 1U rackmount for efficient use of space.
Special Order
JBL CSA1120Z 120W 1U Commercial DriveCore Amplifier with Built-in 70/100V
- Delivers 120W of high power output at 8 Ohms.
- Low distortion ensures pristine audio fidelity.
- Signal-to-noise ratio >100dB for clear sound.
- Input/output flexibility with Euro Block & RCA.
- Reliable protection circuits ensure amplifier life.
Ships from Manufacturer
Cerwin Vega CV2-22H Professional 2260W 2-Channel Audio Power Amplifier
- Experience powerful 2260W audio amplifier performance.
- Optimize sound with a professional 2-channel amplifier.
- Deliver clear audio; low THD, high S/N ratio.
- Safeguard equipment with comprehensive circuit protection.
- Ensure longevity via advanced flow-through cooling.
Temporarily On Backorder
Ashly FX Series FX750.2 2-Channel 750W Class D Power Amplifier with DSP
- 750W Power Amplifier: High power output for pro audio.
- Low THD: Ensures clean, pristine audio amplification.
- High Signal-to-Noise Ratio: Crystal-clear sound quality.
- Reliable Protection Circuits: Prevents amplifier damage.
- Flexible Input Impedance: Adapts to various audio sources.
Special Order
Ashly NX Series 2-Channel 75W Multi-Mode Power Amplifier
- 75W Power Amplifier: High Output, Low Distortion.
- Multi-Mode Amp: Versatile Impedance Matching.
- Reliable Power: Built-in Amplifier Protection.
- Efficient Cooling System: Prevents Overheating.
- Selectable Input Sensitivity: Optimize Audio Levels.
Special Order
Ashly FX Series FX500.2 2-Channel 500W Class D Power Amplifier with DSP
- 500W Ashly Power Amplifier: High power output.
- Class D Amplifier: Ultra-low THD for clear audio.
- Signal-to-Noise Ratio: >108dB for pristine sound.
- Power Amplifier with comprehensive protection circuits.
- Flexible Input Impedance: Adapts to various sources.
Special Order
Ashly FA Series FA125.4 4-Channel 125W Compact Class D Power Amplifier
- 4-Channel Power Amplifier: Precise audio control.
- 125W Power Output: Robust sound reproduction.
- Low THD: Ensures high-fidelity audio clarity.
- High Signal-to-Noise Ratio: Clean, crisp audio.
- Comprehensive Protection Circuits: Reliable operation.
Special Order
Ashly NX Series 2-Channel 150W Multi-Mode Power Amplifier
- 150W Power Amplifier: High power output for pro audio.
- Low distortion ensures pristine audio fidelity.
- High signal-to-noise ratio: Crystal-clear sound.
- Impedance matching for optimal speaker performance.
- Reliable protection prevents amplifier damage.
Special Order
Crown Audio XTi 2002 475W Stereo Power Amplifier
- Crown Audio: 475W Power Amplifier at 8 Ohms.
- High Power Output: 1000W at 2 Ohms Stereo.
- Low Distortion: THD less than 0.5% for clear audio.
- Signal-to-Noise Ratio: 100dB (A weighted) ensures quality.
- Reliable Protection Circuitry: Prevents amp damage.
Special Order Item
Crown Audio CT475 4-Channel Rackmount Power Amplifier
- 75W Power Amplifier: Clear audio at 8 Ohms.
- Four Channel Power Amp: Flexible audio routing.
- Wide 20Hz-20kHz Frequency Response: Pristine sound.
- Low THD: <0.05% for clean power amplification.
- High SNR: 110dB signal-to-noise power ratio.
Special Order Item
Ashly NXE Series 2-Channel 150W Networkable Multi-Mode Power Amplifier
- 150W Power Amplifier: High output, 2 channels.
- Low THD ensures pristine audio fidelity (<0.5%).
- Signal-to-Noise: >99dB, 20Hz-20kHz, gain at 26dB.
- Input Impedance: 10k Ohms for optimal signal.
- Damping Factor: >250 (@8 Ohms) for clear sound.
Special Order
Crown Audio XTi 4002 650W Stereo Power Amplifier
- Delivers 650W power at 8 ohms for pro audio.
- Low distortion ensures pristine sound quality.
- High signal-to-noise ratio: 100dB (A weighted).
- Input impedance: 20k ohms balanced for clarity.
- Damping factor >500 ensures optimal speaker control.
Special Order
Ashly NXP 2-Ch 75W Networkable Power Amplifier with Protea DSP Software Suite
- 75W Power Amplifier: High output for pro audio.
- Low THD: <0.5% for clear, pristine audio quality.
- S/N Ratio: >96dB ensures minimal background noise.
- Damping Factor: >250 for superior speaker control.
- Input Impedance: 10k Ohms, wide compatibility.
Special Order
Ashly NXE Series 4-Channel 150W Networkable Multi-Mode Power Amplifier
- 4-Channel Power Amplifier: 150W at 2/4/8 Ohms.
- Networkable Amplifier: Ethernet control via RJ-45.
- Multi-Mode Amplifier: 25V/70V/100V constant voltage.
- Low THD: <0.5% (8 Ohms) for pristine audio quality.
- High Signal-to-Noise: >99dB ensures clear sound.
Special Order



















