Power Amplifiers
Save 5% Every Day† with the Adorama Edge Card. Learn More
Crown Audio DCi 8X300N Install Network 8-Ch 8x300W Power Amplifier w/ BLU Link
- High Output Power: 8x300W at 4 Ohms.
- Signal-to-Noise Ratio: >104dB for pristine audio.
- Low THD: 0.35% ensures minimal distortion.
- Input Sensitivity: +20dBu maximum before compression.
- Damping Factor: >1000 for superior speaker control.
Special Order
Art Pro Audio SLA-1 100 Watt Studio Linear Amplifier
- High Power Output: 100W RMS per channel at 8 ohms.
- Low THD: Ensures clean audio with <0.05% distortion.
- Signal-to-Noise Ratio: >100dB below clipping for clarity.
- Optimal Damping Factor: Provides tight, controlled sound.
- Input Sensitivity: 1V for full power into 8 ohms.
Special Order
Crown Audio XTi 1002 275W Stereo Power Amplifier
- Delivers 275W at 8 Ohms for pro audio power.
- Low THD ensures clean, pristine sound quality.
- Optimal impedance matching for peak performance.
- Efficient cooling system prevents overheating issues.
- High signal-to-noise ratio enhances audio clarity.
Special Order Item
Ashly CA Series CA1.02 2-Channel 1000W Class D Power Amplifier
- High output power: 1000W Class D amplifier.
- Low distortion: Ensures pristine audio quality.
- Signal-to-noise ratio: >101dB for clear sound.
- Input impedance: 10k Ohm, versatile connectivity.
- Damping factor: >250, optimal speaker control.
Special Order
Ashly NX Series 2-Channel 75W Multi-Mode Power Amplifier
- 75W Power Amplifier: High Output, Low Distortion.
- Multi-Mode Amp: Versatile Impedance Matching.
- Reliable Power: Built-in Amplifier Protection.
- Efficient Cooling System: Prevents Overheating.
- Selectable Input Sensitivity: Optimize Audio Levels.
Special Order
Crown Audio DriveCore Install DA Series 4-Channel 1250W Power Amplifier
- Crown Audio: 4-channel power amplifier, 1250W.
- Low THD ensures pristine audio quality output.
- High damping factor for superior speaker control.
- Pro power amp with >108dB signal-to-noise ratio.
- Reliable protection circuits ensure amp longevity.
Special Order Item
Ashly CA Series CA502 2-Channel 500W Class D Power Amplifier
- 500W Class D Power Amplifier, 2 channels
- High signal-to-noise ratio ensures audio clarity
- Low THD (Total Harmonic Distortion) for clean sound
- Flexible input sensitivity for various sources
- Reliable protection circuits ensure amplifier safety
Special Order
Art Pro Audio SLA-4 4-Ch 4x140W Power Amplifier
- High Output Power: 4x140W RMS into 4 ohms.
- Low Distortion: THD less than 0.05% typical.
- Signal-to-Noise Ratio: >100dB below clipping.
- Input Sensitivity: 1V for full power output.
- Impedance Matching: 44k/22k Ohm balanced/unbalanced.
Special Order
Ashly KLR Series KLR2000 2-Channel 1000W High-Performance Power Amplifier
- High-Performance Power Amplifier: 1000W Output.
- Optimized Signal-to-Noise Ratio: >108dB (20Hz-20kHz).
- Low THD: <0.05% ensures pristine audio quality.
- Versatile Impedance Matching for optimal performance.
- Efficient Cooling System: Variable speed fan included.
Special Order
Kramer Electronics 900N Stereo Audio Power Amplifier
- 8.4 Watts per Channel Power Amplifier Output
- Low THD+Noise ensures pristine audio fidelity.
- High Signal-to-Noise Ratio: 55dB performance.
- Stereo Power Amplifier with balanced inputs.
- Compact Amplifier: Perfect for discreet installs.
Ships from Manufacturer
Crown Audio DCi 2X1250 DriveCore Install Analog 2-Ch 2x1250W Power Amplifier
- High Power Amplifier: 2x1250W at 2/4/8 Ohms.
- Low THD: 0.35% ensures pristine audio quality.
- Signal-to-Noise Ratio: >108dB for clear sound.
- Input Impedance: 10k Ohms balanced, 5k unbalanced.
- Damping Factor: >1500 minimizes distortion.
Special Order
Crown Audio CDi 2X600 DriveCore Series 2-Ch 2x600W Power Amplifier, Analog Input
- Delivers 600W power @ 4/8 ohms for pro audio.
- Low THD ensures pristine audio signal fidelity.
- High damping factor enhances speaker control.
- Signal-to-noise ratio >104dB for clear sound.
- Balanced input impedance minimizes noise issues.
Special Order
Samson Servo 120A Power Amplifier
- Delivers clean sound quality with low distortion.
- Reliable power amplifier for professional audio use.
- High power output: 60W @ 4 Ohms, <0.05% THD+N.
- Flexible I/O: RCA & 1/4" inputs for connectivity.
- Durable build ensures long-term performance.
Special Order
Crest Audio 2-Channel Professional Amplifier, 1100W at 4 Ohms Bridged Power
- High Power Amplifier: 450W at 4 Ohms Stereo.
- Low THD ensures pristine audio fidelity.
- Superior Signal-to-Noise Ratio for clear sound.
- High Damping Factor for optimal speaker control.
- Input Impedance optimized for signal integrity.
Temporarily On Backorder
Avantone Pro CLA100 Class A/B Studio Reference Amplifier, 100 W Power at 8 Ohms
- High Power Output: 100 Watts at 8 Ohms for robust sound.
- Low THD ensures pristine audio fidelity, minimal noise.
- Signal-to-Noise Ratio optimized for clear, dynamic sound.
- High Damping Factor delivers tight, controlled bass response.
- Input Sensitivity tailored for optimal amplifier performance.
Special Order Item
RDL ST-PA6 6W Mono Audio Power Amplifier
- 6 Watts RMS power amplifier output at 8 Ohms.
- Low THD+N ensures clean audio amplification.
- Balanced/unbalanced 100 kOhms input impedance.
- Frequency response: 35 Hz to 20 kHz (+/- 1.5 dB).
- Adjustable EQ boosts at 60/100/120 Hz.
Special Order
Ashly CA Series CA1.52 2-Channel 1500W Class D Power Amplifier
- 1500W Class D Power Amplifier, high power output.
- Low THD ensures pristine audio signal fidelity.
- High signal-to-noise ratio; clear, quality sound.
- Input impedance: 10k Ohm for optimal performance.
- Damping factor >250 for superior speaker control.
Special Order
Ashly Network Enabled 8-Channel Amplifier, 250W @ 25V & DSP
- High Output Power: 250W per channel at 25V.
- Signal-to-Noise Ratio: >98dB for pristine audio.
- Low Total Harmonic Distortion: Clear sound quality.
- Input/Output Flexibility: Euroblock & Ethernet ports.
- Reliable Thermal Design: Prevents overheating issues.
Special Order
Atlas Sound CP700 Dual-Channel 700W High Performance Commercial Power Amplifier
- High Output Power: 700W for professional audio.
- Low Harmonic Distortion ensures clear sound quality.
- High Signal-to-Noise Ratio: pristine audio output.
- Reliable Protection Circuits prevent amplifier damage.
- Input Impedance: Balanced, reduces unwanted noise.
Special Order
Ashly FA Series FA250.4 4-Channel 250W Compact Class D Power Amplifier
- 4-Channel Power Amplifier: Distributes audio easily.
- 250W Compact Amplifier: High power in small design.
- Class D Amplifier: Ensures reliable performance.
- Low Distortion Amplifier: Provides pristine audio.
- Euroblock Connectors: For secure audio connections.
Special Order
Ashly KLR Series KLR4000 2-Channel 2000W High-Performance Power Amplifier
- High output power: 2000W at 2 Ohms amplifier.
- Ensures superior audio with low THD distortion.
- Signal-to-noise ratio: >109dB for pristine sound.
- Reliable protection: Prevents overcurrent damage.
- Efficient cooling: Variable speed fan maintains temp.
Special Order
Atlas Sound DPA-102PM 2-Channel 2x 100-Watt 4 Ohm Networkable Power Amplifier
- 2x100W Power Amplifier at 4 Ohms for robust audio.
- Low THD ensures pristine sound, high Signal-to-Noise.
- Multiple Input Options: RCA, balanced, Euro Block PHX.
- Reliable Protection Circuitry prevents amp damage.
- Compact Form Factor fits easily into any setup.
Special Order
Crown Audio CDi DriveCore 2-Channel 1200W Power Amplifier, Analog Input
- Delivers 1200W of high power output per channel.
- Ensures pristine audio with a low THD of 0.35%.
- Exceptional >104dB signal-to-noise ratio.
- High damping factor >1000 for superior sound.
- Input impedance: 10KOhms balanced, 5K unbalanced.
Special Order
TOA Electronics AV-20D Class D Plenum Rated Micro Power Amplifier
- TOA AV-20D: High Power Amplifier, 2x20W at 4 Ohms.
- Class D Amp: Low THD ensures pristine audio quality.
- Pro Power Amp: Wide 20Hz-20kHz Frequency Response.
- Versatile Inputs: Multiple Connectivity Options Included.
- Micro Amplifier: Signal-to-Noise Ratio Optimized.
Ships from Manufacturer
Ashly Network Enabled 4-Channel Amplifier, 250W @ 100V
- 250W Power Amplifier: High output, pristine audio.
- Network Enabled: Ethernet control with Protea NE.
- Low THD Amplifier: Ensures clear, accurate sound.
- High Signal-to-Noise Ratio: >98dB for clean audio.
- Optimal Input Impedance: 20k ohms, balanced input.
Special Order





















