Batteries & Power Supply
Save 5% Every Day† with the Adorama Edge Card. Learn More
Furman Sound MIW-POWER-PRO-PFP 15A In-Wall Home Theater Power Management
- Advanced surge protection: 546 Joules, peace of mind.
- Dual AC outlets: Power strip alternative, in-wall design.
- 15A power management: Reliable home theater protection.
- EMI/RFI noise filtration: Level 1, clear audio/video.
- Over-voltage shutoff: Prevents equipment damage fast.
Ships from Manufacturer
Furman Sound SP-1000 SmartPLUG, 2 Outlet, 1.25" Thin Profile
- SmartPLUG: Wireless control via ZigBee network.
- 2 Outlets: Provides surge protection for electronics.
- 12A Rating: Ensures safe power for your devices.
- Thin Profile: Fits discreetly behind furniture.
- 120 VAC: Reliable power for home electronics.
Ships from Manufacturer
Furman Sound M4315-PRO 15 Amp Power Management with Interactive Control
- Advanced surge protection: 2700 Joules rating.
- 9 total outlets: Power strip for all devices.
- Remote power management via BlueBOLT-CV1 card.
- EMI/RFI noise filtration ensures clean power.
- 15 Amp power supply with auto over/under voltage.
Ships from Manufacturer
Furman Sound M4000-PRO 15 Amp BlueBOLT Enabled Power Management
- Advanced surge protection: 1575 Joules dissipation.
- 8 protected power outlets for comprehensive defense.
- Remote power management via BlueBOLT technology.
- EMI/RFI noise filtration ensures clean power.
- Network surge protection for RJ-45 CAT 5e lines.
Ships from Manufacturer
Furman Sound Classic Series P-8 PRO C 20 Amp Power Conditioner with SMP
- 9 Outlets power conditioner for pro audio setups.
- SMP surge protection ensures clean, safe power.
- 20 Amp power supply handles high current loads.
- Linear noise attenuation reduces line interference.
- Durable steel chassis for lasting power protection.
Special Order
Furman Sound Prestige P-3600 AR G 30A Global Voltage Regulator/Power Conditioner
- Advanced surge protection with zero ground leakage.
- Voltage regulator ensures stable power at 120 VAC.
- 10 total outlets: Front & rear NEMA-20 receptacles.
- 30 Amp power conditioner for pro audio equipment.
- Noise attenuation minimizes interference at 500 KHz.
Ships from Manufacturer
American Power Conversion (APC) AP8930 Switched Rack 2G Power Distribution Unit
- 24 NEMA 5-20R outlets for power distribution.
- 9.84 ft. cord length for flexible placement options.
- 120V APC power supply with 50/60 Hz frequency.
- Surge protection ensures connected device safety.
- ZeroU form factor maximizes rack space efficiency.
Ships from Manufacturer
Hosa Technology Hosa 2x, 1' Piggyback IEC C13 to NEMA 5-15P Power Cord
- 1' Hosa power cord: piggyback IEC C13 to NEMA 5-15P.
- Durable power supply cord: 14 AWG x 3 OFC conductors.
- Reliable extension cord for home electronics use.
- Compact 1-foot power cord minimizes cable clutter.
- Hosa Technology power cord ensures optimal power flow.
Ships from Manufacturer
Hosa Technology Hosa 2x NEMA 5-15R to NEMA 5-15P Right-Angle Power Adapter
- Right-angle NEMA adapter saves space.
- Converts NEMA 5-15R to NEMA 5-15P safely.
- Ideal power adapter for tight spaces.
- Durable Hosa Technology power solutions.
- Ensures secure power connection always.
Whirlwind WP4/0H Wall Mounting Plate, 4 Gang, Blank, Stainless Steel
- Durable stainless steel: Long-lasting wall plate.
- 4-Gang blank configuration: Ultimate flexibility.
- Compatible with standard junction boxes.
- Easy installation: Mounting screws included.
- Enhance cable management: Clean, safe setup.
Ships from Manufacturer
Whirlwind WP3/0H Wall Mounting Plate, 3 Gang, Blank, Stainless Steel
- Durable stainless steel wall plate, 3-gang blank.
- Standard compatibility with electrical junction boxes.
- Ensures safe, secure wall unit installation.
- Brushed stainless steel offers lasting durability.
- Easy installation with included mounting screws.
Ships from Manufacturer
Whirlwind WP2B/2NDH Wall Mounting Plate, 2 Gang, Punched for 2 Neutrik D XLRs
- Durable anodized aluminum wall plate ensures longevity.
- Standard gang box compatibility for easy installation.
- Punched for Neutrik D XLRs offers secure connections.
- Black finish wall unit complements any setup aesthetic.
- 4.5" x 4.5" size provides a seamless wall mount fit.
Ships from Manufacturer
Whirlwind WP2B/4H Wall Mounting Plate, 2 Gang, Punched for 4 XLRs, Black
- Durable aluminum plate ensures lasting performance.
- Standard size fits most electrical junction boxes.
- Easy installation with included mounting screws.
- Optimized for XLR connectors; simplifies cable setup.
- Provides a clean, aesthetic wall unit installation.
Ships from Manufacturer
Whirlwind WP5/0H Wall Mounting Plate, 5 Gang, Blank, Stainless Steel
- Durable stainless steel: built for lasting use.
- Standard compatibility: fits electrical boxes.
- Blank configuration: customize your setup easily.
- Secure wall mount: ensures stable power supply.
- Five-gang plate: supports multiple connections.
Ships from Manufacturer
Whirlwind WP6/0H Wall Mounting Plate, 6 Gang, Blank, Stainless Steel
- Durable stainless steel: Long-lasting wall plate.
- 6-gang blank configuration: Ultimate flexibility.
- Easy installation: Fits standard junction boxes.
- Enhance aesthetics: Brushed stainless steel finish.
- Secure mounting: Includes screws for wall units.
Ships from Manufacturer
Whirlwind WP7/0H Wall Mounting Plate, 7 Gang, Blank, Stainless Steel
- Durable stainless steel wall plate ensures longevity.
- 7-Gang blank configuration offers high compatibility.
- Standard size fits electrical junction boxes easily.
- Brushed stainless steel provides a sleek, safe finish.
- Secure wall mounting plate installation is effortless.
Ships from Manufacturer
Whirlwind WP2B/4NDH Wall Mounting Plate, 2 Gang, Punched for 4 Neutrik D XLRs
- Durable aluminum wall plate fits standard boxes.
- 2-gang power supply plate; Neutrik D XLR compatible.
- Optimize power supply setup with mounting screws.
- Black anodized finish ensures lasting durability.
- Wall unit accessory: 4.5" x 4.5" gang size.
Ships from Manufacturer
Whirlwind WPX5B/0H Wall Mounting Plate, 5 Gang, .125" Black Anodized Aluminum
- Durable aluminum plate ensures lasting power supply.
- Standard compatibility with electrical junction boxes.
- 5-Gang configuration offers versatile wall unit setup.
- .125" black anodized aluminum for enhanced safety.
- Blank configuration allows for custom power solutions.
Ships from Manufacturer
Whirlwind WPX6B/0H Wall Mounting Plate, 6 Gang, .125" Black Anodized Aluminum
- Durable .125" Aluminum: Long-lasting wall unit.
- Standard Compatibility: Fits electrical boxes easily.
- 6-Gang Configuration: Maximizes wall plate capacity.
- Black Anodized Finish: Offers sleek, modern look.
- Easy Install: Mounting screws included for setup.
Ships from Manufacturer
Whirlwind WPX4/0H Wall Mounting Plate, 6 Gang, .125" Clear Anodized Aluminum
- Durable aluminum plate fits standard junction boxes.
- Ensures easy installation for 6-gang configurations.
- Provides a safe, secure wall unit mounting solution.
- Compact design maintains a low-profile appearance.
- Clear anodized aluminum offers lasting durability.
Ships from Manufacturer
Whirlwind WPX4/0H Wall Mounting Plate, 5 Gang, .125" Clear Anodized Aluminum
- Durable aluminum plate fits standard junction boxes.
- Ensures stable mounting for wall unit power supplies.
- Compatible with 5-gang electrical configurations.
- Provides a safe, secure install for power units.
- Anodized aluminum offers lasting value and quality.
Whirlwind WPX2/0H Wall Mounting Plate, 2 Gang, .125" Clear Anodized Aluminum
- Durable aluminum plate fits standard boxes.
- Ensures safe, secure wall unit installation.
- Clear anodized finish for lasting durability.
- Compatible with 2-gang electrical boxes.
- Easy installation with included mounting screws.
Ships from Manufacturer
Whirlwind WPX4B/0H Wall Mounting Plate, 4 Gang, .125" Black Anodized Aluminum
- Durable aluminum plate fits standard junction boxes.
- Black anodized finish ensures lasting wall unit value.
- Four-gang configuration offers enhanced portability.
- Provides a blank interface for custom setups safely.
- Easy setup with included mounting screws for plates.
Ships from Manufacturer
Whirlwind WPX3B/0H Wall Mounting Plate, 3 Gang, .125" Black Anodized Aluminum
- Durable aluminum plate ensures lasting stability.
- Black anodized finish offers aesthetic appeal.
- 3-gang wall plate fits standard junction boxes.
- Provides floor protection for wall-mounted units.
- Easy installation with included mounting screws.
Ships from Manufacturer
Whirlwind WPX2B/0H Wall Mounting Plate, 2 Gang, .125" Black Anodized Aluminum
- Durable aluminum plate fits standard junction boxes.
- Black anodized finish for lasting wall unit protection.
- 2-gang configuration: 4.5" x 4.5" blank wall plate.
- Ensures safe, secure mounting for power supplies.
- High-quality Whirlwind wall plate for reliable use.
Ships from Manufacturer






















