Microphone Accessories
Save 5% Every Day† with the Adorama Edge Card. Learn More
Gator Cases Heavy Duty Ball Head Camera Mount Adapter
- Securely mount cameras with ID Series adapter.
- Achieve optimal angles: 360° swivel & 90° tilt.
- Heavy-duty build ensures lasting microphone support.
- Position locking for stable, precise camera placement.
- Compact size integrates seamlessly into setups.
Ships from Manufacturer
Audio-Technica AT8539 Phantom Power Supply
- AT8539: Low-noise phantom power supply.
- Stable voltage ensures clear microphone signal.
- Compact size integrates easily into any setup.
- Durable build for reliable phantom power use.
- Compatible with Audio-Technica AT892 microphone.
Special Order
Lectrosonics SRSUPER DB25 Bottom Plate Adapter for SR Receivers
- Secure Lectrosonics SR Receiver mounting plate.
- Durable DB25 adapter ensures stable setup.
- Guaranteed compatibility with SR receivers.
- Includes hardware for easy, secure installation.
- Provides a stable base for audio clarity.
Electro-Voice RE3-ACC-CXU10 10' Low Loss BNC Coax Cable, 50 Ohms Impedance
- Low Loss BNC Coax Cable ensures optimal signal.
- 10' Coaxial Cable with Male BNC to Male BNC connectors.
- 50 Ohms Impedance minimizes signal reflection issues.
- Estimated 2.2 dB attenuation maintains sound quality.
- Durable cable for UHF distribution & receivers.
Jason Cases Hard Case with Laser-Cut Foam for 2x Shure MX412 Microphone
- Durable microphone case: Ultimate protection.
- Laser-cut foam: Secure Shure MX412 microphone fit.
- Lightweight, portable microphone case design.
- Hard case: Safeguard mics from damage.
- Compact size: Easy to transport your mics.
On Backorder
Audix D-Vice Micro Tension Goose-Neck Clip for MICROD/Micros Microphone
- Secure Audix Micro mic with tension goose-neck clip.
- D-Vice clamp ensures optimal drum microphone placement.
- Minimizes noise: Superior isolation for clear recordings.
- Durable build: Long-lasting Audix microphone accessory.
- Easy installation: Quickly attach to any drum hardware.
Ships from Manufacturer
Shure ADX5BS-L L-Type Battery Sled for ADX5D Axient Digital Wireless Receiver
- Stable voltage ensures optimal mic performance.
- Low noise power supply delivers clear audio.
- Compact size integrates easily into any setup.
- Durable build guarantees long-lasting reliability.
- Phantom power supports condenser microphones.
Ships from Manufacturer
DPA Microphones GSM4000 Gooseneck Mount for d:dicate Recording Microphone
- Securely mount d:dicate mics with this gooseneck.
- Provides stable, adjustable microphone positioning.
- DPA Microphones mount ensures optimal audio capture.
- Durable gooseneck design for long-lasting reliability.
- Compatible with d:dicate recording microphone series.
Ships from Manufacturer
K&M 23325 Floor and Tabletop Microphone Stand, 8.5-13.6" Height, Black
- Durable steel microphone stand with stable base.
- Adjustable height: 8.5-13.7" desktop mic stand.
- Heavy, round base ensures microphone stand stability.
- Compact tabletop microphone stand for easy use.
- 5/8"-27 male threaded connector microphone stand.
Special Order
Remote Audio 10' West Penn 807 RG8x 50Ohms Antenna Cable,SMA RA to BNC Connector
- Premium RG8x antenna cable ensures optimal signal.
- 10' antenna cable offers extended reach, flexibility.
- SMA to BNC connectors provide secure, reliable link.
- Durable West Penn 807 cable for lasting performance.
- 50 Ohms impedance guarantees clear audio quality.
Special Order Item
Hollyland Charging Case for LARK M2 Mobile Version, Shine Charcoal
- Provides stable power for Hollyland LARK M2.
- Compact charging case ensures microphone power.
- Offers >2 full charges for TX/RX simultaneously.
- Fast charging: fully charges in under 1.5 hours.
- Durable build protects your microphone system.
ProX T-MIC01 Tripod Microphone Stand with Boom
- ProX Tripod Microphone Stand: Stable & Durable.
- Adjustable Mic Stand Height: 36" to 66" Range.
- 30" Boom Arm for Optimal Microphone Placement.
- Universal Microphone Clip Included for Compatibility.
- Portable Mic Stand: Tripod Base for Easy Transport.
Ships from Manufacturer
Shure UA8 1/2 Wave Omnidirectional Receiver Antenna
- Enhance signal with this Shure receiver antenna.
- BNC connector ensures reliable antenna connectivity.
- Omnidirectional antenna for superior sound quality.
- Durable Shure antenna built for lasting performance.
- Optimized antenna boosts wireless microphone range.
Rode Headset Mount for Lavalier & SmartLav+ Microphones, Junior
- Secure Rode Lavalier Mic Headset Mount
- Adjustable for Perfect Microphone Placement
- Durable Headset Mount for Rode Microphones
- Lightweight & Comfortable Microphone Mount
- Stable Mic Positioning for Clear Audio
K-Tek KSSM Short Microphone Shock Mount Sanken CS-1
- Isolate unwanted noise with this shock mount.
- Durable build ensures long-lasting microphone support.
- Universal compatibility with boom poles & mic stands.
- Quick, easy installation saves valuable setup time.
- Achieve optimal positioning with full adjustability.
Ships from Manufacturer
VocoPro CLUB-8 Karaoke Case with Slant Top and Carpeted Exterior
- Durable microphone case: steel handle, carpeted.
- Portable karaoke case: compact, easy transport.
- Slant top design: ideal for vocal performance.
- Protective padding: secures audio equipment.
- VocoPro CLUB-8: professional audio solution.
Temporarily On Backorder
Neumann Standing Swivel Mount with 0.23" (6mm) Rubber Thread for AK Capsules
- Durable Neumann mount ensures microphone stability.
- Adjustable swivel for optimal AK capsule positioning.
- Compact desktop microphone stand saves valuable space.
- Premium Neumann quality offers exceptional value.
- Tabletop mic stand provides secure attachment method.
Ships from Manufacturer
On-Stage SB9600 Tripod Studio Boom with 7" Mini Boom Extension
- Stable tripod base ensures secure microphone stand setup.
- Adjustable studio boom extends up to 82" for optimal reach.
- Durable steel construction guarantees long-lasting support.
- Compatible with most standard microphone accessories.
- Portable design ideal for studio, stage, and field use.
Temporarily On Backorder
Rode Headset Mount for Lavalier & SmartLav+ Lapel Microphones, Large
- Secure lavalier mic positioning with headset mount.
- Durable Rode mount ensures stable microphone placement.
- Lightweight headset boom for Lavalier & SmartLav+ mics.
- Achieve optimal audio with adjustable mic positioning.
- Compatible with Lavalier & SmartLav+ lapel microphones.
ClearOne Analog Interface Box for Ceiling Microphone Array Analog-X
- Seamless analog microphone integration via interface box.
- Extend connectivity up to 200' with RJ45 CAT5e/6.
- Reliable power supply ensures consistent performance.
- Durable build for long-lasting audio solutions.
- Easy setup with included mounting brackets.
Ships from Manufacturer
Remote Audio 25' West Penn 807 RG8x 50Ohms BNC Antenna Cable
- 25' RG8x Antenna Cable: Superior sound quality.
- Durable BNC Connectors: Ensures secure connection.
- 50 Ohms Impedance: Optimized audio signal transfer.
- West Penn 807 Cable: Enhances signal durability.
- Remote Audio Cable: Professional-grade accessory.
Ships from Manufacturer
On-Stage MS7325 Stackable Microphone Stand
- Durable microphone stand with weighted base.
- Adjustable height: 34-61" for optimal positioning.
- Stackable design saves space; ideal microphone stand.
- Stable 9.85" base diameter ensures secure placement.
- Portable 7lb microphone stand for easy transport.
Temporarily On Backorder
ProX XB-230 Padded Bag for Par Cans, Microphone Cables and Clamps
- ProX XB-230: Secure microphone case for safe transit.
- Padded bag protects mics, cables, and clamps.
- Durable microphone bag: Safeguard your audio gear.
- Portable design: Easy transport of microphone cables.
- Standard microphone case: Reliable protection on the go.
Temporarily On Backorder
PSC Large Universal Shock Mount with 3/8"x16 Threads for Boom-Pole Mounting
- Superior noise isolation for pristine audio capture.
- Durable aluminum build ensures lasting shock mount use.
- Universal compatibility with most microphones & booms.
- Easy installation via standard 3/8"x16 threads.
- Adjustable suspension optimizes microphone stability.
Ships from Manufacturer












