Microphone Accessories
Save 5% Every Day† with the Adorama Edge Card. Learn More
Audio Implements Model MAT-2 25' Cord
- 25' Cord ensures optimal microphone placement.
- RJ11 Plug offers secure, reliable audio connection.
- Compatible with 305, 605, 655, BCS-4, and T-4.
- Durable cable for long-lasting microphone use.
- High-quality audio signal transfer guaranteed.
Ships from Manufacturer
H&A Microphone Suspension Shock Mount for RE20 / RE27N/D / RE320 Microphones
- Isolate noise with this microphone shock mount.
- Durable steel frame ensures long-lasting support.
- Universal shockmount fits 1" diameter mics.
- Easy installation for quick setup and use.
- Adjustable suspension bands for optimal isolation.
On Backorder
On-Stage Basic Fixed-Height Desktop Microphone Stand with Black Shaft
- Stable desktop microphone stand; weighted base.
- Fixed-height mic stand; durable, black shaft.
- Compact microphone stand; 4-inch height adjust.
- 6-inch base spread ensures microphone stability.
- Lightweight microphone stand; easy to position.
SKB iSeries 3i-1711-SEN Waterproof Case for Sennheiser EW100/300/500 Mic Systems
- Durable SKB case: Ultimate Sennheiser mic protection.
- Waterproof microphone case: iSeries for secure transit.
- Portable mic case: Lightweight, yet rugged design.
- Custom foam padding: Secure fit for wireless mics.
- Compact size: Ideal Sennheiser wireless mic case.
Special Order Item
RF Venue Polarization Diversity Fin Antenna, Black
- Optimized RF Venue antenna for superior sound.
- Polarization diversity ensures reliable connectivity.
- Wide 470-698 MHz bandwidth antenna for clear audio.
- Durable antenna design withstands -23°C to 54°C.
- Enhance audio with 5 dBd LPDA gain antenna.
Special Order
K-Tek KPTA Sidekick Bottom Plug-On Transmitter Adapter Module
- K-Tek Sidekick: Securely mount wireless transmitters.
- Boom pole adapter: Fits KlassicPro & most boom stands.
- 3-Pin XLR Male Connector: Upward-facing for easy setup.
- Lightweight design: Enhances boom pole portability.
- Durable build: Ensures long-lasting microphone support.
Ships from Manufacturer
Triad-Orbit OM Mini Short Single-Arm Orbital Boom
- Durable microphone stand: reliable Triad-Orbit build.
- Stable base ensures secure microphone positioning.
- Adjustable boom arm: precise mic placement control.
- Universal mic stand: compatible with most mics.
- Portable design: ideal for studio or on-the-go use.
Special Order
Earthworks SR5117 Supercardioid Mic Capsule for Sennheiser System,Black, 5-Pack
- Superior supercardioid capsule for clear vocals.
- Premium condenser microphone: impeccable quality.
- Optimized for Sennheiser Wireless Systems.
- Crisp 20Hz-20KHz frequency response ensures clarity.
- Experience Earthworks sound, trusted by pros.
Temporarily On Backorder
Rycote InVision Studio USM-VB Universal Microphone Shock-Mount
- Isolate unwanted noise with this microphone shockmount.
- Universal shock mount fits mics 18-68mm in diameter.
- Durable build quality ensures long-lasting performance.
- Achieve optimal sound with adjustable microphone angles.
- Quick & easy installation for studio microphone setups.
Temporarily On Backorder
On-Stage MA-100B 3/8" Male to 5/8" Female Mic Screw Adapter
- Durable mic adapter ensures secure microphone setup.
- Stable 3/8" to 5/8" adapter for various mic stands.
- Adjustable screw adapter fits most microphone models.
- Compatible with standard US & Euro mic threading.
- Portable & lightweight mic screw adapter solution.
Sennheiser MZS-600 Shock Mount for MKE600 Shotgun Microphone
- Isolate your Sennheiser MKE600 mic from vibration.
- Durable shock mount ensures long-lasting performance.
- Achieve superior noise isolation for clear recordings.
- Quick, easy installation to any standard mic stand.
- Provides secure & adjustable microphone positioning.
Lectrosonics ZFSC41 4-Way Passive RF Signal Splitter
- Lectrosonics ZFSC41: Wide 1-1000MHz RF signal range.
- Passive RF splitter ensures top sound quality output.
- Durable build for reliable, long-term performance.
- Four-way splitter offers versatile BNC connections.
- Minimizes noise with excellent signal isolation (20dB).
SKB iSeries 3i-342412 Wheeled Watertight Hard Case for Shure Microflex System
- Watertight hard case ensures ultimate protection.
- Durable SKB case fits Shure Microflex Wireless.
- Wheeled case for easy, portable transport solution.
- High-density foam padding offers secure fit.
- Exterior: 37.75x27x13.5" - microphone case size.
Schoeps MK 21 Wide Cardioid Microphone Capsule, Matte Gray
- Schoeps MK 21: Pristine sound quality assured.
- Wide cardioid microphone capsule for balanced audio.
- Durable microphone part: withstands 132 dB SPL.
- 30Hz-20kHz: Capture full range with this microphone.
- Low noise: 15 dB-A ensures clear recordings.
Ships from Manufacturer
Latch Lake micKing RetroBoom Telescoping Boom Arm, Black
- Telescoping boom arm extends 40"-83" for optimal reach.
- 7lb counterweight ensures microphone stand stability.
- Durable micKing RetroBoom offers reliable performance.
- Adjustable boom clutch for precise microphone placement.
- Professional microphone boom arm for studio recording.
Special Order
PSC FBPMCC Elite Series Medium Carbon Fiber Boom Pole with Coiled Cable
- Lightweight carbon fiber boom pole; 14oz for easy use.
- Adjustable length: 2.2' to 8.3' boom pole range.
- Sturdy build: Elite Series carbon fiber boom poles.
- Internal coiled cable for clean cable management.
- Secure locking system ensures stable microphone support.
Ships from Manufacturer
K&M 29376 Microphone Table Base without Switch, 3-Pin Male and Female XLR, Black
- Durable zinc die-cast base ensures microphone stability.
- Compact microphone table base with XLR connectors.
- Sleek black finish for professional aesthetics.
- Stable design ideal for desktop microphone use.
- 3-Pin XLR connectors ensure broad microphone compatibility.
Ships from Manufacturer
K&M 25530 Extra-Long Boom Arm with Counterweight & Toggleclamping
- Durable steel microphone stand, adjustable length.
- Extra-long boom arm: 34-61" for optimal placement.
- Stable, adjustable counterweight ensures secure mic.
- Universal 5/8" threaded connector for microphones.
- Portable, lightweight design; ideal for studio use.
WindTech Extension Pole Adapter
- Adapts extension poles to 5/8"-27 mic threads.
- Universal mic boom pole adapter for varied brands.
- Durable build ensures long-lasting microphone support.
- Provides stable connection for audio recording setups.
- Compatible with Wooster, Mr. Longarm, and Unger poles.
PSC RF Six Pack with Aaton Digital Interface, Single Band 470-700MHz
- Single Band 470-700MHz: Optimized audio antenna.
- Low 2.0dB noise figure ensures clear sound quality.
- +39 IP3 enhances durability in high RF environments.
- 24dB output isolation minimizes signal interference.
- Aircraft Aluminum chassis ensures lasting durability.
Ships from Manufacturer
Earthworks 1' Stand Extension for FlexWand Series Microphones
- Extend FlexWand Series Microphones' reach.
- Seamless compatibility, superior quality.
- Earthworks 1' stand extension, reliable.
- Enhance audio with FlexWand accessory.
- Durable design for consistent performance.
Temporarily On Backorder
Rycote Super-Blimp Windshield and Shock-Mounting System
- Rycote Super-Blimp: Superior shotgun mic windshield.
- Isolates microphone for crystal-clear audio capture.
- Durable shock-mount system reduces unwanted noise.
- Universal compatibility: Fits Rode NTG & Sennheiser MKE.
- Quick, easy installation for professional recording.
Special Order
Klover Road Case with Handle and Wheels for Two KM-26 Parabolic Microphones
- Durable Klover case: Ultimate microphone protection.
- Portable design with handle & wheels for easy travel.
- Custom-fit for two KM-26 parabolic microphones.
- Robust road case: Ensures safe microphone transport.
- Water-resistant material shields against moisture.
Special Order
Audio Implements OTCS-U On-Camera Audioclarifier with Ear Tips
- Audioclarifier enhances on-camera audio quality.
- Includes ear tips for left and right ear comfort.
- Coiled acoustic tube ensures durable performance.
- Seven ear tip sizes ensure a secure, custom fit.
- Single receiver clip offers ease of use on camera.
Ships from Manufacturer
K&M 23220 Tabletop Microphone Stand, 1.77" Height, Black
- Durable steel microphone stand with stable base.
- Compact tabletop mic stand; adjustable height.
- Heavy, cast-iron base ensures microphone stability.
- 5/8" threaded connector for universal compatibility.
- Sleek, black microphone stand; aesthetic design.
Special Order















