Microphone Accessories
Save 5% Every Day† with the Adorama Edge Card. Learn More
Sennheiser SKM 100 G4 Handheld Transmitter, A1: 470 - 516 MHz
- Durable Sennheiser handheld transmitter body.
- Exceptional sound quality, wide 470-516 MHz range.
- Maximize vocal clarity with low THD <= 0.9%.
- Compatible with SKM 1xx, 3xx, and 5xx series.
- Reduce noise with switchable pilot tone squelch.
Ships from Manufacturer
Schoeps S 170 L 170mm Short Gooseneck for Suspending Microphone
- Schoeps Gooseneck: Stable microphone positioning.
- 170mm Short Gooseneck: Perfect for stage use.
- Durable polyurethane ensures long microphone life.
- Non-reflecting surface: Ideal for theater mics.
- Flexible microphone stand: Adjust to 5.51 inches.
Ships from Manufacturer
Shure UA860SWB Passive Omnidirectional Antenna
- Optimized antenna enhances wireless sound quality.
- Durable Shure antenna ensures reliable connectivity.
- Wideband antenna: 470-1100 MHz frequency range.
- Omnidirectional antenna for consistent reception.
- Easy setup with included stand and thread adapters.
Ships from Manufacturer
Electro-Voice RE3-ACC-CXU50 50' Low Loss BNC Coax Cable, 50 Ohms Impedance
- Low Loss Coax Cable: Ensures optimal signal strength.
- 50 Ohm Impedance: Matches pro audio equipment perfectly.
- BNC Connectors: Provides secure, reliable connections.
- Durable Coaxial Cable: Built for lasting performance.
- 1.4dB Attenuation: Minimizes signal loss effectively.
Ships from Manufacturer
Klover MIK 09 Parabolic Dish for Lavalier Microphone
- Lightweight microphone boom pole; easy transport.
- Durable build ensures reliable microphone support.
- Adjustable length boom pole for perfect positioning.
- Secure locking system keeps microphone stable.
- Integrated cable management for clean audio setup.
Special Order
Neumann 33' (10m) Microphone Cable with 8-Pin DIN Connectors
- Neumann cable ensures superior sound quality.
- 33' microphone cable for extended reach, flexibility.
- Durable 8-pin DIN connectors provide secure link.
- Low noise cable design for pristine audio capture.
- Compatible with Neumann M149, M150, M147 mics.
Ships from Manufacturer
Audix Microboom84 84" Carbon Fiber Boom Arm with Clutch Assembly
- Lightweight carbon fiber boom pole, 4oz.
- 84" adjustable microphone boom arm length.
- Durable steel gooseneck for precise mic placement.
- Mini-XLR connectors ensure secure audio signal.
- Non-reflective black finish; pro boom pole.
Ships from Manufacturer
Sennheiser ASP113 Three-Way Passive Antenna Splitter 2 Need to Join 3 Receivers
- Sennheiser antenna splitter: wide 30-950 MHz range.
- Passive design ensures optimal sound quality.
- Durable build for reliable antenna performance.
- Connect up to 3 receivers with this antenna.
- Minimizes signal loss: approx. 6 dB attenuation.
Ships from Manufacturer
Shure UA834XA VHF In-Line Antenna Amplifier, 902-960MHz Frequency Range
- Optimized VHF antenna amplifier boosts signal.
- Enhance wireless microphone sound quality reliably.
- Durable cast aluminum housing ensures longevity.
- Remote mounting with included surface bracket.
- Wide 902-960MHz frequency range compatibility.
Special Order Item
Deity Microphones AMB1 Adjustable Mounting Bar for Stereo Microphones or Antenna
- Secure microphone mount for stereo setups.
- Aviation aluminum build ensures lasting durability.
- Achieve precise positioning with adjustable design.
- Universal compatibility with 1/4" & 3/8" threads.
- Provides stable support for microphones/antennas.
Special Order
K&M 26145 Microphone Stand with Boom, 39.4-66.9" Height, Black
- Stable microphone stand with a heavy, round base.
- Adjustable height: 39.4-66.9" for optimal placement.
- Durable steel construction ensures long-term use.
- Compatible with standard 5/8" threaded microphones.
- Telescoping boom arm extends from 18.5 to 30.3".
On Backorder
Ambient Recording 12" Double MS XLR-3F/2x LEMO Triax to XLR-7M Cable Adapter
- Premium XLR Cable Adapter ensures optimal sound.
- 12" Microphone Cable for Schoeps CCM Microphones.
- Durable XLR to LEMO Triax connectors guarantee quality.
- Low Noise cable adapter for pristine audio capture.
- High Compatibility with Triax connectors microphones.
Ships from Manufacturer
Sound Devices CS-3 Production Case with High-Quality Strap
- Durable Cordura fabric Sound Devices case.
- Portable case for field mixers & recorders.
- Secure your 7-Series Recorders in this case.
- Customizable compartments for audio equipment.
- Compact size: Perfect for MixPre mixer storage.
Special Order
SKB iSeries 3i-1711-SEN Waterproof Case for Sennheiser EW100/300/500 Mic Systems
- Durable SKB case: Ultimate Sennheiser mic protection.
- Waterproof microphone case: iSeries for secure transit.
- Portable mic case: Lightweight, yet rugged design.
- Custom foam padding: Secure fit for wireless mics.
- Compact size: Ideal Sennheiser wireless mic case.
Special Order Item
AKG BP4000 Battery Pack for WMS4000/4500 Wireless Microphone System
- Stable voltage ensures optimal mic performance.
- Low noise power supply delivers clear audio signal.
- Compact size integrates easily into any setup.
- Durable build guarantees long-lasting microphone power.
- Phantom power supports condenser microphones easily.
Special Order
Rycote 18cm Large Hole SGM Foam Windscreen, 10-Pack
- Superior noise reduction with foam windscreen.
- Durable foam ensures long-lasting microphone protection.
- 18cm windscreen provides a good fit for shotgun mics.
- Enhance sound clarity, reduce unwanted wind noise.
- Easy installation: slips on quickly and securely.
Ships from Manufacturer
Sennheiser RG213 50' Low-Loss RF Antenna Cable
- Low-Loss RG213 Antenna Cable: Superior sound quality.
- 50' RF Antenna Cable: Extends wireless microphone range.
- Durable BNC Connectors: Ensures secure, reliable connectivity.
- MIL-Spec Antenna Cable: Built for lasting durability.
- Sennheiser Antenna Cable: Optimized for seamless use.
Ships from Manufacturer
Sony SAD-S77 Safety-Pin Type Clip, 6 Pack
- Secure ECM-77 microphone clip ensures stability.
- Durable safety-pin clip for Sony microphones.
- Pack of 6 microphone mounts for convenience.
- Compatible with ECM-77 lavalier microphones.
- Provides stable, discreet microphone positioning.
Temporarily On Backorder
BizCom SL CM FB Ceiling Surface Mounting Bracket for TeamConnect Ceiling 2
- Secure ceiling mount for TeamConnect Ceiling 2.
- Durable bracket ensures stable microphone placement.
- Easy setup with included mounting screws (M4).
- Compatible with TeamConnect Ceiling 2 array.
- Surface mounting bracket for audio clarity.
Special Order
Ways to Save
SE Electronics Reflexion Filter PRO Acoustic Absorber, Black with Chrome Trim
- Pro acoustic filter reduces unwanted room reflections.
- Portable vocal booth ensures clean audio recordings.
- Achieve studio-quality sound with effective filtering.
- Durable construction for long-lasting performance.
- Universal compatibility with most microphone stands.
Special Order
Audio-Technica ATWC6100 Interchangeable Hypercardioid Dynamic Microphone Capsule
- Hypercardioid capsule for focused sound pickup.
- Dynamic element ensures robust, clear audio quality.
- 100-15000Hz frequency response captures vocals well.
- Compatible with ATW-T3202, T5202, & T6002xS mics.
- Industry-standard thread for easy microphone swaps.
Special Order
SE Electronics Reflexion Filter PRO Acoustic Absorber, Standard
- Pro Acoustic Filter: Superior noise reduction.
- Portable vocal booth for studio-quality recordings.
- Reflexion Filter PRO: Enhances vocal clarity.
- Durable construction ensures long-lasting value.
- Easy setup with included mounting bracket.
Special Order
DPA Microphones DUA0250 9.8" Floor Base for Long Stage Microphone Boom Pole
- Stable mic placement: 9.8" floor base diameter.
- Durable microphone boom pole base with matte finish.
- Secure your long stage microphone boom pole setup.
- Universal compatibility: Works with boom poles.
- Black powder-finished microphone boom pole base.
Ships from Manufacturer
Audio-Technica ATW-C710 Interchangeable Cardioid Condenser Microphone Capsule
- Cardioid capsule enhances vocal clarity.
- Condenser mic element ensures sound quality.
- Low noise: delivers pristine audio capture.
- Compatible with ATW handheld transmitters.
- Durable build for reliable performance.
Special Order
TOA Electronics Wall/Ceiling Mounting Kit for AM-1 Microphone System, Black
- Secure AM-1 microphone system with ceiling mount.
- Durable black finish ensures long-lasting stability.
- Wall mount kit offers adjustable microphone positioning.
- Easy to use design for quick microphone installation.
- Compatible with TOA Electronics AM-1 microphone.
Ships from Manufacturer










