Vortex Optics Torque Wrench Kit with 13 Tips

2025-05-02T20:00:00

The product is great and use it for all of my optics needs. Will recommend this to anyone who needs an inch per pound torque wrench for your optics.

Jason K.

Originally posted at

2025-01-10T19:00:00

Easy to use and I was surprised how bad of a job I did just winging the tightness across all my scores this gave me confidence I was being consistent

Cole S.

Originally posted at

2025-01-04T19:00:00

great torque wrench well built and easy to use.

Billy R.

Originally posted at

2024-12-30T19:00:00

Works great !

Robert R.

Originally posted at

2024-11-13T19:00:00

It was great while it worked. Bought it from an official Vortex vendor in my country, but after just a couple of months of having it, the rubber handle came completely off. At the shop they told me I'd drenched it in oil because indeed the steel shaft under the handle was absolutely dripping with some sort of oil. Needless to say - I'd done no such thing, I'm not in the habit of lubricating my screwdrivers' handles. Duh. They said they'd contact Vortex on the issue, but it's been 5 months since, and though I've called multiple times - no action has been taken. Furthermore - since that, I found out other people have been having the same issue, as well as one of my close friend's came off to. Again - shaft covered in oil. He just uses it without the rubber grip, but I value my optics too much to just trust this pos screwdriver for my mounts.

George Y.

Originally posted at

2024-09-16T20:00:00

Great torque wrench for the work bench or range bag. Comes with everything you need and is easy to adjust and use. Fits nicely in my range bag with provided plastic case. Used this many times on the range to quickly correct students torques on rings and mounts in training. Item is great for anyone who has any type of mounted optics.

Mark T.

Originally posted at

2024-09-04T20:00:00

I have used this torque driver for 4 years working at a gun counter. I have loved using it. It is super simple to adjust from 1-50 inch pounds. I have used it to mount hundreds of scopes throughout the years. The only downside is that it only comes with a few bits. It would be nice to get more. I did have one wear out after the first year and a half, but Vortex took care of us. I am definitely getting one for home.

Riley

Originally posted at

2024-08-27T20:00:00

I use it for mainly firearms but it makes torqueing anything smaller down super simple, easily adjustable, comfortable in the hand. It does come with some of the common sizes for torque, hex, or a socket. However it doesn't have all the different bits you could possibly need, but my guess is if it did come with all the sizes then it would cost a bit more. I used a drill bit set from my local hardware store. The bits fit just fine. I would highly recommend this for anyone looking

Zachary S.

Originally posted at

2024-08-19T20:00:00

Feels solid; good selection of bits. Works well for most indicated applications, but some manufacturers' recommend torquing scope rings or mounts in the 55+ in-lb range, which pushes the max for this device. Know your use case, but would buy again.

D F.

Originally posted at

2024-07-28T20:00:00

works well, simple and easy to use. Before the torque wrench, I thought they were a scame. Until I mounted a scope via my hands and eyeballs alone. MY point of impact kept shifting and scope coming loose. I bought the torque wrench and behold. Everything works now. it's a great investment. can be used beyond the range and for other projects that require sensitive torque specs. I would recommend 100% to have in your inventory.

Mason M.

Originally posted at

2024-06-13T20:00:00

Great Product and an even better company! Easy to use and works very well

Mitchell S.

Originally posted at

2024-05-04T20:00:00

Very well made and does exactly what I need it do. Easy to use and versatile. Really glad that I picked this up.

Landon M.

Originally posted at

2024-04-27T20:00:00

Very easy scale to adjust off of. Compared to others on the market this torque wrench is quick and precise.

Garret W.

Originally posted at

2024-04-19T20:00:00

Purchased and used the product on various firearms to either repair or mount rifle scopes. The positive areas of this product are the fit and finish were excellent, handle circumference and texture fill the hand comfortably and grip is easy to maintain. The bits seem of good quality and have not damaged repair areas or stripped out at the tip. The lifetime Vortex warranty applies to their torque wrench. The wrench does not have a clear audible detent and click when a torque value is reached. Instead it ratchets past the desired torque point, as if it has slipped off the work point. Lastly, the font size for on the outer ring is used to set torque is quite small, and consequently very challenging to read make quick adjustments.

torque m.

Originally posted at

2024-03-08T19:00:00

Exactly what I needed! Took a bit to figure out how to lock the bits and drivers in but I got it!

Fred

Originally posted at

2024-02-13T19:00:00

Excellent quality

Luis P.

Originally posted at

2024-02-07T19:00:00

Easily understandable, and dead on the money with the right amount of torque

Micheal R.

Originally posted at

2024-01-02T19:00:00

Great product! But, I hate the tube container. Zippered pouch would have been MUCH BETTER.

Tracy

Originally posted at

2023-12-28T19:00:00

Well worth the money. Used this on all of my optics and even ones I felt like were torqued right were wrong. Great to know your expensive optic is mounted properly!

John T.

Originally posted at

2023-12-28T19:00:00

Vortex is an all around American product with a true American warranty. I have Vortex on all my rifles and use their torque wrench to mount all my optics. It's a nice package wrench with all the bits you need, and easy to use. I recommend purchasing if you DIY.

Brock R.

Originally posted at

2023-11-20T19:00:00

Ok we have all been there mounting scopes and sights without this tool wondering if it's tight enough or if the scope just became a permanent part of the gun. This tool takes the guess work out of that and takes things to spec. The tools is easy to use and adjustments are smooth. When you get to spec the tool will give a click and feels like what I would describe as a slip. It does feel like quality and provides multiple bits to accommodate sight mounting. Overall I would recommend this product.

John F.

Originally posted at

2023-11-10T19:00:00

for getting the Vortex Precision rings dialed in perfectly.

Ryan C.

Originally posted at

2023-10-20T20:00:00

This little torque driver set has everything you will need to set up your sights or optics. The grip feels great in my hand and is very grippy; your hand will not slip! The overall quality of this set is apparent in feel and use. You can feel the quality of materials in the weight of this little driver, and the setting dial feels butter smooth and locks securely, and the bits lock in tightly. If you're deciding between this and Real Avid's correlate, pay the extra money for this Vortex driver! A friend of mine has the Real Avid, and the torque-setting dial is right up on the handle, making it difficult even to use the driver without accidently changing the torque setting! This Vortex Torque Wrench will give you none of that nonsense, due to the superior design of having a locking collar up on the shaft.

Thulr

Originally posted at

2023-09-16T20:00:00

have used this torque wrench to mount multiple optics, scope bases and even action screws flawlessly. it is intuitive to use and comes with enough bits that I have mounted Vortex, Leupold, Burris scopes and scope rings with out having to buy more pieces. I could not recommend it more for beginners or experts. properly torquing guns and optics has made a big difference in my firearms performance; great job Vortex!

Brayton S.

Originally posted at

2023-09-01T20:00:00

????

Richard K.

Originally posted at

2023-08-31T20:00:00

This was a grate tool easy to use and was spot on with recommendations for right torque for my optics. I really like using this tool.

Noel L.

Originally posted at

2023-07-29T20:00:00

Just got it and mounted multiple scopes. Commenting on the review by Vaan above, the torque screwdriver DOES lock the bits, but you have a two position option at the front end that lets you select whether you want it to lock or not. (It's a black ring that you rotate around a little bee-bee which requires a little pressure before it gives and rotates. One position and the bits slide out, the second position creates tension with the bee-bee and locks / snaps in.) At first I also had the bits falling out, but then realized rotating the black ring at the end fixes it.

Mr_M

Originally posted at

2023-07-28T20:00:00

Ball retention system is worthless and for the price should be able to have them made with a bit higher "# values 60-70"#? Seems to be quality product other than the worthless bit retention system!!

Tbird

Originally posted at

2021-12-01T19:00:00

Would assume finding some way to secure the bits, whether magnets or friction, to the tool? Not sure anyone wants to keep picking up the bits as it drops out when you use it.

Vaan

Originally posted at

2020-12-16T19:00:00

I have had my torque wrench for about a year and a ½. I have mounted/remounted numerous red dots and this wrench works great. I can highly recommend it to anyone.

Rick O.

Originally posted at