Nikon UR-5 Adapter Ring

2017-07-04T12:39:03

It does what it's supposed to. A bit over done. It should work without the ring. It's a useful bit of gear.

Warren G.

2016-09-12T08:42:35

Work perfectly to mount the SX-1 Attachment Ring and SB-R200s without putting stress on the macro lens focusing elements.

BRUCE O.

2013-07-01T21:00:00

Works well with the 60mm micro lens

Wes

2012-01-05T19:00:00

Out of all the nikon lenses that would benefit from this system (R1C1/R1) and it's surprising that the 60mm 2.8D would need an adapter ring? The R1C1/R1 was made for this lens. Poor planning somewhere along the way.

Juan G.

Originally posted at

2011-11-04T20:00:00

I cannot believe that Nikon produces such a flimsy, poorly designed attachment for its excellent R1C1 Macro Flash. The first thing you will notice, it does not attach tightly enough tou your macro lens, then, the screw stands out and every time you take the lens aout of the back it sticks out and pulls the ring off. Unfortunately if you want to use the exellent 60mm micro nikkor you have to use this ring. So: put a piece of paper between the ring and your lens and it holds tight and replace the screw by a flat one. Then it actualy works...

Frank

Originally posted at

2009-01-20T19:00:00

Necessary when using the R1C1 Close-up Speedlight Commander Kit with the AF Micro-Nikkor 60mm f/2.8D lens, as it puts the weight of the kit on the lens barrel, and not on the lens itself, preventing damage.

Richard S.

2007-11-05T19:00:00

The best way to fix the SX-1 macro flash ring onto the 60mm f/2.8 D Micro-Nikkor.

Helveto p.