


Picture does not represent the actual item
See Options
Need help? Ask our experts.
Review Summary
+28dBu
> 20kOhms
+28dBu
< 50 Ohms
Adjustable -15dB to +12dB, ref 0dBu gain via a multi-turn pot
>60dB
200Hz to 4kHz, 12dB/octave
Better than 40dB at 100Hz
Better than 40dB at 1kHz
20Hz - 22kHz +/- 0.1dB
0.01% THD at 1kHz, ref +8dBu output (C-Message weighted)
-90dBu unity gain +6dBu
2x XLR 3 pin female (balanced) (L and R)
1x XLR 3 pin female (balanced) (L and R)
1x XLR 3 pin male (balanced) (L and R)
Filtered IEC, switchable 110-120V or 220-240V, fused, 6W max.
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)
11 x 4.3 x 1.7" / 27.94 x 10.92 x 4.31cm
2.4lbs / 1.08kg
The Sonifex RB-MM1 is a unit for generating a suitable mix to send to a telephone hybrid or codec. A stereo output is taken from a mixer, together with a post fader output from the mono telephone fader on the mixer. The caller audio is removed from the station output so that it can be sent to the telephone line via the hybrid.
The analog audio inputs and outputs are via Neutrik XLR connectors. The output level to the TBU can be adjusted using a rear panel pre-set potentiometer. To control the cancellation null (the amount of the telephone channel which is subtracted from the mixer output signal), 2 multi-turn potentiometers are provided, one for the LF null and the other for the full-band null. Additionally, a band pass filter can be switched in and out, via a rear panel switch, to condition the signal for the telephone hybrid. To use the RB-MM1 unit with full-band ISDN codecs, the band pass filter can be switched out. For stereo codecs or conference calls, multiple RB-MM1 units can be used.