Used Microphone Accessories

Used Sennheiser CHG 2 US 2-bay Table Top Charger with U.S Power Supply for Evolution Wireless D1 Series Digital Bodypack System

• Sennheiser charger: Reliable power supply.
• Durable build ensures long-term performance.
• Compact size: Saves space on your desktop.
• Stable voltage output for optimal device use.
• Two-bay charger: Powers two devices at once.

Used Jason Cases Waterproof Wheeled Hard Case with Laser-Cut Foam for Shure MX412 8-Microphones, Black

• Durable microphone case: Waterproof, IP67 rated.
• Precut foam ensures secure microphone protection.
• Wheeled case for easy, portable microphone transport.
• Impact-resistant case: Protects 8 Shure MX412 mics.
• Hard case with retractable handle for convenience.

Used Sony SMAD-P3 Multi-Interface Shoe Adapter for UWP-D Series Wireless Receivers

• Secure Sony receiver mounting via multi-interface.
• UWP-D series wireless receiver adapter: cable-free.
• Durable shoe mount ensures stable audio capture.
• Seamless Sony adapter: quick, easy setup process.
• Compact, lightweight design for on-the-go use.

Used SKB iSeries Waterproof Case for 2 Sennheiser ENG Systems, or 2 Senal Systems

Used Telex UAD-4 UHF Narrow Band Antenna Combiner/Splitter System for FMR-500, FMR-1000 and SAFE-1000 Receivers, 600-780MHz Frequency, BNC Input/Output

• UHF Antenna Combiner/Splitter: Enhances sound quality.
• BNC Connectors: Ensures durable, secure RF input/output.
• 600-780MHz Frequency: Broad compatibility for receivers.
• For FMR & SAFE Receivers: Optimizes device compatibility.
• Reduces Noise: Provides clear audio, greater than 2dB.

Used Rycote 010606 Windshield 295 for Sennheiser 416 with Medium Modular Suspension

• Hytrel Plastic Construction
• Interlocking Ends

Used Rycote Windjammer for Rode Blimp Windshield & Suspension System

• Superior windscreen: ultimate noise reduction.
• Durable synthetic fur: built to last for years.
• Perfect fit: custom-designed for Rode Blimp system.
• Pro audio: enhances recording clarity, reduces noise.
• Quick installation: easy to attach and remove.

Used H&A Broadcast Arm with Internal Springs and Integrated XLR Cable

• Durable steel & plastic desktop microphone stand.
• Integrated XLR cable ensures low noise recording.
• Adjustable mic stand extends up to 40 inches.
• Stable broadcast arm supports up to 5 lbs mics.
• Compatible with 5/8"-27 standard mic threads.

Used Auray BP-47A Aluminum Boompole with Internal Coiled Cable and Bottom Exit (7.5')

Used H&A Pop Filter with Gooseneck and Adjustable Knob (Clamp On)

• H&A Pop Filter: Superior noise reduction tech.
• Gooseneck design ensures easy, precise placement.
• Durable pop filter build for long-term reliability.
• Universal mic pop filter: Secure, clamp-on mount.
• Enhance audio quality with this microphone filter.

Used CAD Audio Acousti-Shield 16 Stand Mounted Acoustic Enclosure for Pencil Condensers/Dynamic Mic

Used Ambient Recording QuickPole Series 5 13.2' 5-Section Carbon Fiber Wired Boom Pole with Straight Mono Cable and 3-Pin XLR Connecter

• Lightweight carbon fiber boom pole, only 26.81 ounces.
• Extends to 13.2' with 5 sections; collapses to 3.4'.
• Durable twist-lock system for quiet microphone operation.
• Integrated XLR cable for streamlined audio recording.
• Adjustable boom pole with removable top; 3/8"-16 thread.

Used Ambient Recording QuickPole Series 5 13.2' 5-Section Carbon Fiber Wired Boom Pole with Coiled Stereo Cable and 5-Pin XLR Connecter

• Lightweight carbon fiber boom pole; portable design.
• Extends to 13.2' for optimal microphone placement.
• Integrated coiled cable reduces handling noise.
• Durable 5-section pole with secure twist locks.
• 5-Pin XLR connector ensures stable audio signal.

Used H&A Value Series XLR M to F Professional Microphone Cable - 25'

• 25' XLR microphone cable ensures optimal length.
• Delivers superior sound quality for clear audio.
• Durable XLR cable build for long-lasting use.
• Low noise microphone cable for pristine recording.
• XLR male to female cable ensures compatibility.

Used Auray Stuffed Rabbit Professional Windshield For Microphone (16cm)

Used K & M 20170-500-55 Microphone Stand, 35.4 to 63" Height

• Durable steel microphone stand for reliable support.
• Adjustable height: 35.43-62.99" for optimal positioning.
• Stable tripod base ensures secure microphone placement.
• Portable, foldable legs for easy transport & storage.
• Compatible: Standard 5/8" thread connector included.

Used Grace Design E422 Stand Mount, Right Angle

Used Denecke Low Noise Phantom 48 Volt Microphone Power Supply

• Low Noise: Crystal-clear audio, minimal interference.
• Stable 48V Phantom Power: Consistent mic performance.
• Compact Microphone Power Supply: Portable design.
• Easy to Use: Simple setup for quick operation.
• Excellent Value: Professional audio quality, great price.

Used Rode RS-1 Dual-Dock Recharge Station for TX-M2 and LB-1 Batteries

• Stable voltage ensures optimal microphone power.
• Low noise power supply for pristine audio quality.
• Compact size fits seamlessly into any setup.
• Durable build guarantees long-lasting performance.
• Phantom power station charges TX-M2 & LB-1 fast.

Used Audio-Technica XLRF-XLRM Balanced cable,

• Premium XLR cable ensures superior sound quality.
• 6' balanced cable with Neutrik connectors for durability.
• Low noise microphone cable with dual copper shielding.
• Heavy-duty PVC jacket offers lasting cable protection.
• 24 AWG cable provides optimal signal transfer value.

Used Adorama 25' XLR 3-Pin Male to Female Balanced Audio Extension Cable

• 25' XLR Cable ensures optimal sound quality.
• Balanced audio cable reduces unwanted low noise.
• Durable XLR connectors provide reliable compatibility.
• 22 AWG cable offers exceptional signal clarity.
• XLR male to female cable for versatile connections.

Used sE Electronics RF-X Reflexion Filter X (White)

Used PSC Millimic Lithium Power Supply for Shure with TB4M Connector

Used Rode Boompole for NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3 Microphones - Extends to 10 feet

• Lightweight aluminum Rode boom pole, easy to handle.
• Extends to 10' for optimal microphone placement.
• Durable build ensures stability during recording.
• Portable design; collapses for easy transport.
• Adjustable sections for precise microphone reach.

Used Audio-Technica AT8537 Phantom Power Supply Module for AT898 & AT899 Lavalier Microphones