Used Microphone Accessories

Used Saramonic SR-SMC11 Professional Universal Shock Mount for Shotgun Microphones 0.59-1.22

• Isolate unwanted noise with this microphone shockmount.
• Universal shock mount fits 0.59-1.22" shotgun mics.
• Robust build quality ensures long-term microphone support.
• Achieve optimal sound with 360° rotation & 150° tilt.
• Quick, easy installation onto 15mm mounting rods.

Used DPA Microphones SM1500 Shock Mount for Omnidirectional and Directional Microphones

• Isolate microphone noise with pro shock mount.
• Durable build ensures long-lasting shock mount use.
• Universal compatibility with various mic models.
• Easy installation for quick microphone setup.
• Adjustable design for optimal mic positioning.

Used H&A Broadcast Arm with Internal Springs and Integrated XLR Cable

• Durable steel & plastic desktop microphone stand.
• Integrated XLR cable ensures low noise recording.
• Adjustable mic stand extends up to 40 inches.
• Stable broadcast arm supports up to 5 lbs mics.
• Compatible with 5/8"-27 standard mic threads.

Used Rode PSA1+ Professional Studio Boom Arm

• Innovative parallelogram spring design for smooth microphone positioning
• Fully damped internal springs for silent operation and noise isolation
• Extended reach with full 360-degree rotation for precise mic placement
• Integrated cable management compatible with XLR and USB cables
• Supports microphones from 94g to 1.2kg with high-quality locking nuts for stability

Used Shure SBC-DC-903 DC Battery Eliminator for SLXD5 Digital Wireless Portable Receiver

• Provides clean power for optimal audio clarity.
• Low noise operation ensures pristine sound quality.
• Offers stable voltage for consistent performance.
• Durable build quality ensures long-term reliability.
• Compact size integrates easily into any setup.

Used Sennheiser Antenna Booster AB1-C Frequency Range 740-772MHz Gain 10dB

Used Mole-Richardson Microphone Boom Stand

Used H&A Reflection Filter (Silver)

• Achieve superior sound isolation with this filter.
• Durable reflection filter ensures long-lasting use.
• Enjoy easy installation with included mounting gear.
• Perfect fit for most standard microphones & stands.
• Enhance recording quality with effective noise reduction.

Used Godox VSM-R03 4-Section Round Base Adjustable Stand with Locking Joint, Black

• Stable round base microphone stand ensures durability.
• Adjustable height: 48.8-75.2" for optimal mic placement.
• Metal construction offers reliable microphone support.
• Portable 4-section design; collapses to 48.8 inches.
• Compatible with 1/4"-20 male threaded microphones.

Used Rycote Standard Hole Softie Windscreen with 19-22mm (0.74-0.87") Hole Size

Used Sennheiser Fur Windshield for MKE 440 Stereo Shotgun Microphone

• Superior noise reduction for clear audio.
• Durable windscreen ensures long-lasting use.
• Easy installation on MKE 440 microphone.
• High-quality material for enhanced performance.
• Universal compatibility with shotgun mics.

Used Shure SBC850 8-Bay Networked Charging Station with PS45 Power Supply for ULXD6 & ULXD8 Transmitters

• Shure SBC850: Reliable power supply station.
• Networked charging for ULXD6/ULXD8 transmitters.
• Fast charge times ensure minimal downtime.
• Durable build: Molded plastic, zinc alloy.
• Compact size: Efficient use of studio space.

Used H&A Pop Filter with Gooseneck and Adjustable Knob (Clamp On)

• H&A Pop Filter: Superior noise reduction tech.
• Gooseneck design ensures easy, precise placement.
• Durable pop filter build for long-term reliability.
• Universal mic pop filter: Secure, clamp-on mount.
• Enhance audio quality with this microphone filter.

Used Sennheiser CHG 2 US 2-bay Table Top Charger with U.S Power Supply for Evolution Wireless D1 Series Digital Bodypack System

• Sennheiser charger: Reliable power supply.
• Durable build ensures long-term performance.
• Compact size: Saves space on your desktop.
• Stable voltage output for optimal device use.
• Two-bay charger: Powers two devices at once.

Used Audio-Technica AT8120 Large Ball-Shaped Foam Windscreen

• Minimizes wind noise for clear audio recording.
• Ball-shaped windscreen ensures a secure, good fit.
• Durable foam construction provides lasting value.
• Enhances sound clarity by reducing unwanted pops.
• Easy to use; slips on quickly for field recording.

Used Sennheiser K6-P Powering Module, 30-20000Hz Frequency Response, Phantom Power Only, 200 Ohm Nominal impedance, On/Off Switch

• Transformerless balanced output on 3-pin XLR connector
• High output, low noise

Used Shure A15AS Switchable In-Line Attenuator with 15, 20 or 25 dB of Selectable Mic Attenuation, XLR Barrel

• Selectable mic attenuation: 15, 20, or 25 dB.
• XLR connectors ensure seamless audio integration.
• Wide 20Hz-20kHz frequency response for clear sound.
• Low impedance ensures optimal microphone performance.
• Durable build for reliable audio attenuation.

Used Telex CHG-240 4 Bay Battery Charger for BP-240 Batteries

Used Audio-Technica AT8537 Phantom Power Supply Module for AT898 & AT899 Lavalier Microphones

Used edelkrone FlexTILT Head (Version 1 #80347)

Used Monster Cable 12' iStudioLink Microphone mCable XLR to 1/8-Inch StereoMini Plug

Used Lectrosonics MCSRXLR 12" TA3F to XLRM Cable for SR Receiver

• Professional-grade Lectrosonics MCSRXLR 12" TA3F to XLRM Cable for superior audio connections
• Designed specifically for use with the SR Receiver and the External Mounting Kit SREXT
• High-quality, durable construction for reliable and secure connection
• Versatile XLRM end adapts to balanced inputs on professional cameras
• Ideal for linking a microphone with an XLR3M connector to a device with a TA3F connector

Used Ambient Recording Coiled 5-Pin Stereo XLR Cable Kit for QX 5100 Quickpole Light Boom Pole (Bottom Outlet)

• Lightweight boom pole kit; coiled XLR cable included.
• Sturdy carbon fiber build for reliable microphone support.
• Adjustable boom pole cable; extends 37.4" to 165.4".
• Easy to use boom pole kit with XLR connectors.
• Excellent grip; coiled cable offers superior management.

Used K-Tek 2'.3" to 8'.9" 5-Section Carbon Fiber Boom Pole with XLR Coiled Cable, Side Exit

• 5-section carbon fiber boom pole, ideal for ENG and documentary recording
• Graphite fiber construction ensures lightweight durability in a black matte finish
• Dimpled graphite collar locks for jam-resistant and precise length adjustment
• Quick Connect poletop with stainless steel threading for versatile mounting
• Includes side exit KCCR coiled cable kit with Neutrik and Switchcraft XLR connectors