
more

Picture does not represent the actual item


Picture does not represent the actual item
See Options
Need help? Ask our experts.
Review Summary
2400 W
1 Light Kit with Case & Reflector Bag
Advertised as Weather Resistant
Manufacturer Testing: IP55
Art-Net
Bluetooth
Wireless DMX
Yes: Android & iOS
App Name: NANLINK App
1
No
Bi-Color
2700-6500K
Daylight, Tungsten
96
100 Degree
Built-In Dimmer - 0 to 100%
AC
2400 W
100 to 240 VAC
No Connection Included
Manually-Operated Yoke
16.8 x 12.5 x 10.4" (42.7 x 31.8 x 26.4cm)
33.1 lbs (15kg)
Higher Output: Photometrics
Packed with the superb design of NL mount, the Evoke 2400B achieves a remarkable light efficiency with 45 Degree reflector, outputting up to 14,070 lux@5m and 3,607 lux@10m
2700K-6500K Wide CCT Range - G/M +/-80 A Wide G/M Correction Range to Adapt to Unusual Conditions
The Evoke 2400B features advanced Bi-Color light mixing technologies, ensuring continuity and accuracy in CCT change from 2700K all the way up to 6500K. All 2400B have gone through rigorous and professional testing plus calibration.
By incorporating G/M +/-80 tunability in Daylight/Bi-color spotlights, NANLUX R&D team provide creators with the perfect tools to tackle common lighting challenges with ease, whether adjusting the G/M shift to blend with ambient light or to match any other light sources, including those of other manufacturers.
EVOKE 2400B VS. ARRI M40
Testing on set in Sete, France: Using a 216 diffusion gel, lights shine through a window showing a readout from a distance of about 8 meters. (Light reading is measured inside of the building after passing through diffusion.)
IP 55 Rating: Worry Free Operations Anywhere!
The Evoke 2400B's entire system is IP55-rated in hermetically sealed structures to withstand inclement or extreme weather conditions.
Whether it's rain, snow or dust, the power supply and light head are protected with the same IP rating for completely worry-free operations on set.
Easy-to-power System
The Power Supply/Ballast can be connected to nominal household power or full stage power as needed with 2400W rated power to ensure gaffers' and DOPs' ease of operation and safety.
Provides Safer Sets
Traditional lights present heat-safety risks to talent, props, cameras and all set equipment when used at close distances. Some manufacturers even warn of this in their manuals. LED lights, including the Evoke 2400B, can be set at any nominal distance required without risk. This makes for a worry-free set, thus not limiting or burdening the creative needs of all involved.
Compact and Light Weight
Photo Shot with Evoke 1200BThe Evoke 2400B provides a new ease of installation, portability and simplified mounting solutions resulting in lower setup and installation costs.
Dimming Increments for Precise Adjustment
A simplified and intuitive menu interface on a 3.5-inch display makes the Evoke 2400B easy to control in all modes, and similar to existing Nanlux and Nanlite fixtures.
Dimming is fine-tuned in 0.1% increments, enabling these small changes to be effortlessly executed with ultra smoothness.
Four dimming curves are available via DMX control to perfectly match exacting control requirements of the industry: Standard, Linear, Gamma 2.2, Exponent, and Logarithmic.
Limitless Connecting Options
Supports On-board: DMX/RDM, Art-Net/sACN and optional wired NANLINK controller (under development). Wireless control options are available via LumenRadio CRMX, Bluetooth or 2.4G.
Engineered for Frequent and Lengthy Use
Complete with an enhanced fan control system, four operational modes can be utilized for various shooting scenarios and environments: Smart Mode, High Speed, Low Speed and Off modes Effectively managed by the intelligent cooling system, the impact of heat that would normally shorten LED lifespans is eliminated, adding years to maintenance-free service.