Used Flashpoint Long Double 5/8" Baby Pin

2022-07-13T12:44:13

Just a shout out to Gino M. for his Godox/Flashpoint work around. It DOES work great! Thanks, bro! The pin itself is very soiid, too. I'm ordering three more.

DON V.

2022-06-10T10:27:09

Worked great for what I needed it for.

RONALD M.

2022-02-21T07:32:03

Exactly what I needed and expected

Raimondo G.

2022-02-11T07:11:49

It's a shiny bit of metal that fits into lights and grip equipment. What else is there to say? It is very shiny and fits quite well.

Glenn T.

2022-01-17T07:33:05

The two dimples to lock it in are pretty awesome.

NELSON T.

2021-12-13T03:09:12

long enough for hold up studio light and clamp.

Azon C.

2021-11-11T06:21:57

For those of you having trouble fitting this pin into Godox or Flashpoint socket, I have a solution. I cut the top large indent off. See photo. Now it works well

Gino M.

2021-03-08T07:26:08

Great value and works well!

KARL M.

2021-03-01T12:23:11

As others have stated, the reduced diameter portion can be too far from the end for a light or modifier to grab. My main light (AD600 extension head) does reach the reduced diameter portion, but the screw doesn't reach the indented portion of baby pin. That means it's free to rotate around the pin (no matter how tight you make it, it will slip on the polished steel). This is a huge pain when setting up an overhead light at an angle. I had to wrap the pin in gaff tape to prevent this.

ALEX F.

2020-12-30T11:54:09

Thanks Adorama for always having the part I need!

Stirling G.

2020-02-22T05:38:12

I would have thought that I couldn't go wrong with a simple steel rod, but I found that this baby pin doesn't fit my gear securely. The distance from the ends of the pin to the reduced diameter sections at both ends is too great, by several millimeters. So they don't securely fit my Manfrotto superclamps. They also don't fit my Buff strobes. I had to replace them with the equivalent Avenger product, which is the same price as it happens. Other than that, they are heavy solid steel, very shiny, and the right diameter. :-)

Bruce W.

2019-09-19T09:32:36

This pin was (in my opinion) the same quality as more expensive options, and works wonderfully! Good machining & even diameter. Can't beat it for such a great price!

Owen W.

2019-08-25T06:13:28

I got this pin free with the flashpoint c-stand ( awesome stand btw). This pin will not fit completely in the Godox s-type bracket so that the tightening screw on the bracket will not captures the narrow part of the pin, which conceivably can slip right through, dropping ad200pro and and light modifier. It is also not collared so it could also slip through the gobo knuckle and achieve the same calamity. I am talking worst case scenario but i have seen this and more happen. Otherwise it is a great piece of kit.

Vincent P.

2019-01-16T16:32:09

Esential for your set up if it did not come with your “C” stand

Jeffrey L.

2018-10-01T06:52:30

Has a good heft to it, feels solid, and durable. Essential for if you want to mount a strobe to the knuckle of a c-stand, just make sure it will fit your strobe

Daylan B.