Libec HS-150MC 3-Section Carbon Fiber Tripod System with H15 Head, BR-2B Mid-Level Spreader, FP-1B Rubber Feet and RC-30 Case

Perfect Balance
Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position.

Newly Designed Fluid Head
From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience.

Counterbalance Meter
Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake.

Snap On & Off Plate
The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved.

Advanced Drag Unit
The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40 Degree C/-40 Degree F up to +60 Degree C/+140 Degree F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode.

Dual Head
The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods.

User Friendly Accessory Port
Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected.

LED Bubble Level
The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.

Highly Compatible Slide Plate
Slide plate is compatible with Libec's TH-M, TH-X, TH-Z, and NX Series. This industry standard slide plate is also compatible with other brand tripod systems and accessories, allowing users to quickly swap between a wide range of camera supports.

- RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl -
Are you in search of a reliable, high-quality tripod for your photography needs Look no further than the Libec RT20C 3-Section Lightweight Carbon Fiber Tripod. Crafted from durable and lightweight carbon fiber, this tripod is designed for easy transport and longevity, making it an ideal choice for photographers on the go.

This versatile tripod boasts a 75mm bowl, providing a sturdy and stable base for your camera or other photography equipment. With a maximum extended height ranging from 65.1" to 75", it offers flexibility for capturing both low and high shots, ensuring you never miss the perfect angle.

The Libec RT20C is more than just a tripod; it's a tool for capturing stunning visuals. It features an integrated metal spike system, designed to provide unwavering support in various outdoor settings. Whether you're shooting in windy conditions or on uneven terrain, this tripod is built to withstand the elements.

For added versatility, this tripod comes with an adjustable/removable floor-level spreader (sold separately). This feature allows for even more stability and flexibility in your shots, making it a must-have for serious photographers.

In summary, the Libec RT20C 3-Section Lightweight Carbon Fiber Tripod with 75mm Bowl is a sturdy, versatile, and high-quality tool that's designed to meet the demands of any photography enthusiast. Its lightweight design, combined with its robust features, makes it a standout choice in the world of photography equipment.

- H15 75mm Ball and Flat Base Video Head with Pan Handle -
Find the perfect balance with the H15 Dual Base Fluid Head with PH-6B Pan Handle for Video Camera, designed to support a load capacity of up to 6.6 lbs. This innovative product from Libec features a unique continuous counterbalance system that allows your camera to maintain perfect equilibrium at any tilt angle. This smooth balancing system simplifies precise camera movements, even when utilizing a telephoto lens at its maximum zoomed position.

The H15 Fluid Head is a newly designed masterpiece, built from scratch to minimize internal play within its superior pan and tilt drag units, thereby enhancing its durability and longevity. Experience ultra-smooth movements and a plethora of features designed to enrich your user experience.

This fluid head is equipped with a counterbalance meter with a measurement range of 0 to 100, enabling users to quickly gauge the head's minimum and maximum inner spring strength. This feature simplifies on-site camera balancing, making it a breeze.

The H15 also boasts a one-touch snap on/off plate. This feature allows for quick and easy setups in the field, saving you valuable time. The advanced drag unit, layered with metal, ensures operability, durability, and reliability. The finest silicon grease applied offers smoother starts and improved backlash control, providing ordinary pan and tilt movements at a wide temperature range from -40 Degree C/-40 Degree F up to +60 Degree C/+140 Degree F.

The H15 Fluid Head also features a dual-head base specification for quick setup with both 75mm bowl and flat base tripods. It's compatible with sliders, skater dollies, and photo tripods. The fluid head's side is equipped with 1/4 and 3/8 inch screw holes for attaching an accessory arm to hold monitors, lights, and other accessories. The LED bubble level, equipped with an LED light, allows users to level a tripod head in the dark. The counterbalance meter is also illuminated for ease of use.

The highly compatible slide plate is compatible with Libec's TH-M, TH-X, TH-Z, and NX Series. This industry-standard slide plate also works with other brand tripod systems and accessories, allowing for quick swapping between a wide range of camera supports.

- BR-2B Mid-Level Spreader for RT20C and RT30B Tripods -
If you're seeking enhanced stability for your Libec RT20C or RT30B tripods, look no further than the Libec BR-2B Mid-Level Spreader. Expertly engineered for optimal performance, this versatile accessory is a must-have for both professional photographers and videography enthusiasts.

Constructed with durability in mind, the BR-2B Mid-Level Spreader is designed to withstand the weight and pressure of equipment up to 8kg. Its sturdy construction ensures a secure setup, making it an ideal choice for those working with heavy-duty camera and video equipment.

The BR-2B Mid-Level Spreader is not just robust, but also highly versatile. It's specifically designed to work seamlessly with the RT30B tripod, providing a stable and secure setup. This adjustable spreader is best utilized on uneven surfaces where ground spreaders may not lie flat, effectively preventing the tripod's legs from twisting.

Compact in design, the BR-2B Mid-Level Spreader is easy to transport and store, making it a convenient addition to your photography or videography gear. Enhance your equipment setup with the Libec BR-2B Mid-Level Spreader, and experience the difference in stability and ease of use.

- Lightweight Rubber Foot (Set of 3) -
A robust addition to your photography gear, the FP-1B Lightweight Rubber Feet are specifically designed for the RT20C Tripod. Crafted from durable rubber, these sturdy feet are built to withstand the rigors of frequent use, ensuring your tripod remains stable and secure during your photo or video shoots.

Weighing in at a mere fraction of your tripod's weight, these lightweight feet won't add unnecessary bulk to your equipment, making them an ideal choice for on-the-go photographers and videographers. The set includes three pieces, ensuring a balanced support for your tripod.

The FP-1B Rubber Feet are not just durable and lightweight, but also versatile. They can be easily attached to your RT20C tripod, providing a reliable grip that prevents slipping or unwanted movement. This makes them a valuable asset for shooting in various environments, from slick indoor floors to uneven outdoor terrains.

In summary, the FP-1B Lightweight Rubber Feet for RT20C Tripod offer a sturdy, reliable, and versatile solution for enhancing the stability of your tripod. Whether you're a professional photographer or a hobbyist, these rubber feet are a must-have accessory for your RT20C tripod.

- Carrying Case -
Be ready for your next photography adventure with the Libec RC-30 Carrying Case. This stylish black case, crafted from durable vinyl, is specifically designed to house the Libec RT-30B Tripod and LX 5/7 Tripod Systems. Its robust construction ensures it can withstand the rigors of travel and frequent use, offering a protective shield for your valuable equipment.

The RC-30 Carrying Case is not just about durability, it's also about convenience. It features a sturdy handle for easy carrying, and for those times when you need your hands free, it comes with an attached, adjustable shoulder strap. This practical design makes it effortless to transport your tripod and camera equipment, whether you're heading to a local shoot or an international assignment.