
This item is no longer available.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Block 470 (470.100 - 495.600MHz)
256 frequencies in 100 kHz steps for one 25.5 MHz wide block
100kHz
Control panel mounted membrane switches
Switchable; 50, 100 or 250 mW
Digital Hybrid Wireless (400 Series), 200 Series, 100 Series, Mode 3 , Mode 6, IFB
25 to 32kHz; 5kHz deviation (in 400 Series Mode)
+/-0.002%
+/-75kHz max. (in 400 Series Mode)
60dB below carrier
-120 dBV (A-weighted)
0.5 mV to 50 mV before limiting
Greater than 1 V with limiting
1.7 muA to 170 muA before limiting
Greater than 5000 muA (5 mA) with limiting (electret Mic)
17 mV to 1.7 V before limiting
Greater than 50 V with limiting
300Ohms
Input is virtual ground with servo adjusted constant current bias
2.7kOhms
DSP Controlled Soft limiter, 30dB range
Fixed 5 V at up to 5 mA Selectable 2 V or 4 V servo bias for any electret lavaliere
44dB; panel mounted membrane switches
Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation
Control panel with LCD and four membrane switches
Adjustable from 35 to 150 Hz.
35Hz to 20kHz, +/-1dB
Off: 103.5dB
Normal: 107.0dB
Full: 108.5dB
Off: 108.0dB
Normal: 115.0dB
Full: 113.0dB
0.2% typical (400 Series mode)
Switchcraft 5-pin locking (TA5F)
Flexible, unbreakable steel cable
1.5 Volt AA lithium or rechargeable NiMH recommended
1.75 hours (alkaline); 7.5 hours (lithium), 5 hours with 2500mAh NiMH
5.75 hours (alkaline); 14.25 hours (lithium), 8.5 hours with 2500mAh NiMH
5.75 hours (alkaline); 14.25 hours (lithium), 8.5 hours with 2500mAh NiMH
180KF3E
2.3 x 2.4 x 0.64" / 58.42 x 60.96 x 16.26mm (not including microphone)
3.7oz / 104.89g (with lithium batteries)
It is essential for professionals in the audio industry to have reliable and versatile equipment, and the Lectrosonics SMQV Super Miniature Variable Power Transmitter stands out as a top-tier choice. This compact and portable transmitter is engineered to deliver exceptional audio quality with a broad frequency tuning range of 470.100-495.600MHz, making it ideal for a wide array of applications, from film and television production to live events.
Crafted with durability in mind, the SMQV features a corrosion-resistant, ultra-lightweight aluminum housing, ensuring it can withstand the rigors of on-location work. The housing is finished with a special coating that resists salt water and perspiration, making it suitable for use in extreme environments. Additionally, water-resistant seals provide further protection, allowing the transmitter to perform reliably in damp conditions.
The selectable output power of 100 or 250 mW, with a 50 mW option for specific theatrical applications, allows users to optimize for either extended operating range or battery life. This flexibility is a significant advantage over alternative transmitters with more limited power options. The input section boasts Lectrosonics' unique servo bias input circuitry, accommodating a variety of sources through a standard TA5M type jack, including electret lavaliere mics, dynamic mics, or line-level signals.
A DSP-controlled analog audio limiter precedes the A-D converter, offering more than 30 dB of range for superior overload protection. Its dual release envelope ensures the limiter is acoustically transparent, maintaining low distortion and quick recovery from transients without audible side effects. The slow recovery from sustained high levels preserves short-term dynamics while keeping audio distortion minimal.
The transmitter's control panel is designed for efficiency, featuring an LCD, membrane switches, and multi-color LEDs for straightforward input gain adjustments, frequency selection, and compatibility mode settings. The battery compartment is compatible with both lithium and rechargeable AA batteries, providing users with power options to suit their needs.
Lectrosonics' Digital Hybrid Wireless technology is at the heart of the SMQV, combining digital audio with an analog FM radio link. This innovative design eliminates the artifacts associated with traditional analog compandors, offering pristine audio quality and the robust RF performance of the best analog systems. The system is backward compatible with Lectrosonics 200 and 100 Series and IFB receivers, as well as some other brands of analog wireless receivers.
For remote control, the SMQV can be paired with the Lectrosonics RM remote, which uses an audible tone to adjust transmitter settings without disturbing talent or wardrobe. This feature is particularly useful in situations where discretion and speed are paramount.
In summary, the Lectrosonics SMQV Super Miniature Variable Power Transmitter is an advanced, high-tech solution for professionals seeking a durable, compact, and high-performance audio transmission device. Its extensive frequency range, superior audio limiter, and compatibility with various receivers make it a versatile tool for any audio professional's toolkit.