
This item is no longer available.
The core concept of the Venue 2 Receiver's design is flexibility. It allows the receiver modules to operate either independently or in pairs for enhanced diversity reception.
The built-in antenna multicoupler functions as a dual 1 in, 7 out splitter, with six outputs for the receiver modules and an additional 'loop thru' output for another Venue receiver. This allows multiple Venue receivers to operate from a single pair of antennas.
Digital Hybrid Wireless technology is a design that combines digital audio with an analog FM radio link to provide outstanding audio quality and noise-free RF performance. It uses a patented algorithm to encode 24-bit digital audio information in the transmitter into an analog format, which is then transmitted over an analog FM wireless link. The receiver decodes the signal to restore the original digital audio.
Yes, the receiver modules are user-friendly and can be easily changed without the need for any tools.
Yes, the Venue 2 Receiver offers phantom power for remote antenna amplifiers, accessible from the multicoupler antenna inputs via menu selection.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
941.525 - 951.975 MHz
Selectable
100 kHz or 25 kHz
1.5 mS (receiver only -hybrid mode)
3.0 mS (receiver and transmitter in hybrid mode)
3.0 mS (receiver only -analog compatibility mode)
25 to 32 kHz; 5kHz deviation; uniquepilot tone frequency for each selected carrier frequency (Hybrid mode)
Triple conversion superheterodyne
+/-0.001 %
940 - 960 MHz
0.9 uV
>60 dB
2 uV to 1 Volt
85 dB
Antenna Combining Phase switching
Opti-blend ratio diversity
Digital pulse counting detector @ 300 kHz
32 Hz to 20 kHz (+/-1dB), overall system(400 Series mode)
0.2% (typical) (400 Series mode)
125 dB (with full transmitter limiting)
-35 dBu to +8 dBu
in 1 dB increments
High resolution graphical display
10 VDC/2A to 18 VDC/1.2A
19 x 1.75 x 7.75" (48.26 x 4.45 x 19.67cm) (panel to rear jacks)
4.4 lb (1.98kg) with six modules
Take your audio experience to the next level with the WD Band Venue 2 6-Channel Modular Receiver, operating at 941 MHz. This innovative device is a comprehensive solution to the challenges of a crowded RF spectrum, offering a multitude of options for system configuration. It's designed to optimize performance for any installation or application.
The Venue 2 Receiver is a modular system, composed of a master rack mount host assembly, up to six receiver modules, a built-in antenna multicoupler with loop-thru output, and intuitive software for effortless setup and control. The design's core concept is flexibility, allowing the receiver modules to operate either independently or in pairs for enhanced diversity reception. This versatility enables a total of six audio channels when operated separately, or a more robust diversity reception with one audio channel per module pair when operated in pairs.
The receiver modules are user-friendly and can be easily changed without the need for any tools. The wideband multicoupler accommodates any frequency module in any position, except when modules are paired for ratio diversity reception.
One of the standout features of this design is the inclusion of a high-quality antenna multicoupler. This multicoupler functions as a dual 1 in, 7 out splitter, with six outputs for the receiver modules and an additional "loop thru" output for another Venue receiver. This feature enables multiple Venue receivers to operate from a single pair of antennas, enhancing efficiency and performance.
The Venue 2 Receiver also offers phantom power for remote antenna amplifiers, accessible from the multicoupler antenna inputs via menu selection.
The device employs Digital Hybrid Wireless technology, a groundbreaking design that fuses digital audio with an analog FM radio link. This combination delivers exceptional audio quality and noise-free RF performance. A patented algorithm encodes 24-bit digital audio information in the transmitter into an analog format, which is then transmitted over an analog FM wireless link. The receiver decodes the signal to restore the original digital audio, eliminating compandor artifacts and producing an audio frequency response flat to 20 kHz.
In essence, the WD Band Venue 2 6-Channel Modular Receiver, 941 MHz, is a versatile, high-performance solution for any audio setup, offering superior sound quality, flexibility, and user-friendly operation.