Lectrosonics ZS-LRLT-A1 L Series Kit, Includes LR Receiver, LT Beltpack Transmitter, M152 Mic, LRSHOE Camera Shoe Mount, CCMINI Case, A1: 470.100-537.575MHz

SKU: LEZSLRLTA1

This item is no longer available.

Recommended Alternatives

Overview
Compare
Specs
Protection
Q&A

Questions & Answers

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Failure Protection

Failure Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500

Lectrosonics ZS-LRLT Specifications

  • LR Receiver: Channel

    A1

  • LR Receiver: Operating Frequencies

    470.100 to 537.575MHz

  • LR Receiver: Frequency Selection Steps

    Selectable 25 or 100kHz

  • LR Receiver: Receiver Type

    Dual conversion, superheterodyne

  • LR Receiver: IF Frequency

    243.950MHz and 250.000kHz

  • LR Receiver: Frequency Stability

    +/- 0.001%

  • LR Receiver: Front End Bandwidth

    20 MHz at -3dB

  • LR Receiver: Sensitivity

    20dB SINAD: 1.0 uV (-107dBm), A weighted
    60dB Quieting: 2.2 uV (-100dBm), A weighted

  • LR Receiver: Squelch Quieting

    > 100dB typical

  • LR Receiver: Modulation Acceptance

    +/-100kHz max. varies with selected compatibility mode

  • LR Receiver: Image & Spurious Rejection

    85dB

  • LR Receiver: Third Order Intercept

    0dBm

  • LR Receiver: Diversity Method

    SmartDiversity phased antenna combining

  • LR Receiver: FM Detector

    Digital pulse counting detector

  • LR Receiver: RF Spectrum Analyzer

    Single and multiple block scanning modes with coarse and fine views of results

  • LR Receiver: Antenna Inputs

    2x 50Ohms SMA female connectors

  • LR Receiver: Audio Output

    1x TA3 male (mini XLR) balanced output

  • LR Receiver: Audio Output Level

    Adjustable -50 to +5dBu in 1dB steps, unbalanced output level is 6dB lower

  • LR Receiver: Front Panel Controls

    Sealed panel with membrane switches
    LCD for setup menus and monitoring

  • LR Receiver: Audio Test Tone

    1kHz, -50dBu to +5dBu output (balanced), 1%THD

  • LR Receiver: Transmitter Battery

    AA alkaline or lithium
    Timer available for use with alkaline, lithium and HiMH

  • LR Receiver: Audio Polarity Selection

    Normal or inverted

  • LR Receiver: Compatibility Modes

    Digital Hybrid (North American and European)
    Lectrosonics 100, 200 and 300 series
    Lectrosonics IFB
    Non-Lectrosonics modes 3, 6 an 7 (contact the factory for details)

  • LR Receiver: SmartNR (Noise Reduction)

    Off, Normal, Full modes (available in Digital Hybrid mode only)

  • LR Receiver: System frequency response

    32Hz to 20kHz (+/- 1dB) receiver only (see transmitter documentation for overall system response)

  • LR Receiver: Total harmonic distortion

    <0.4 (0.2% typical in Digital Hybrid mode)

  • LR Receiver: Top panel features

    TA3M audio output jack
    2x SMA antenna jacks
    IR (infrared) port

  • LR Receiver: Operating runtimes

    4 hours, AA alkaline

  • LR Receiver: Operating temperature

    -20 to 50 deg. C / -4 to 122 deg. F

  • LT Transmitter: Channel

    A1

  • LT Transmitter: Frequency Range

    470.100 to 537.575 MHz

  • LT Transmitter: Frequency Selection

    Steps: Selectable 25 or 100 kHz

  • LT Transmitter: RF Power Output

    50 or 100 mW

  • LT Transmitter: Pilot Tone

    25 to 32 kHz, 5 kHz deviation (Digital Hybrid mode)

  • LT Transmitter: Frequency Stability

    +/- 0.002%

  • LT Transmitter: Deviation

    +/- 75 kHz max. (Digital Hybrid mode)

  • LT Transmitter: Spurious Radiation

    60dB below carrier

  • LT Transmitter: Equivalent Input Noise

    -120dBV (A-weighted)

  • LT Transmitter: Input Level

    Mic: Nominal 2 to 300 mV, before limiting
    Greater than 1 V maximum, with limiting
    Instrument: 1 MOhms high level

  • LT Transmitter: Input impedance

    2kOhms

  • LT Transmitter: Input limiter

    DSP controlled, dual envelope "soft" limiter with greater than 30dB range

  • LT Transmitter: Gain control range

    44dB, digital control

  • LT Transmitter: Modulation indicators

    Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10dB referenced to full modulation
    LCD bar graph

  • LT Transmitter: Frequency Response

    90Hz to 20kHz (+/-1dB)

  • LT Transmitter: Low frequency roll-off

    -12dB/octave, 70Hz

  • LT Transmitter: THD

    0.2% (typical)

  • LT Transmitter: SNR at Receiver Output

    SmartNR: Off 103.5 (no limiting) 108.0 (with limiting)
    Normal: 107.0 (no limiting) 111.5 (with limiting)
    Full: 108.5 (no limiting) 113.0 (with limiting)

  • LT Transmitter: Controls

    Top panel slide switch, programmable as power, mute, talkback or no (off) function
    Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls

  • LT Transmitter: Audio Input Jack

    Switchcraft 5-pin locking (TA5F)

  • LT Transmitter: Antenna

    Galvanized steel, flexible wire

  • LT Transmitter: Battery

    2x AA alkaline, lithium, NiMh rechargeable

  • LT Transmitter: Battery Life

    Duracell Quantum: 4.75 hours
    Eneloop 2400 mAH NiMH: 6 hours

  • LT Transmitter: Emission Designato

    180KF3E

  • LT Transmitter: Additional Ports

    USB on side panel for firmware updates

  • M152 Mic: Sensitivity

    10mV per Pascal / 100mV at 114dB SPL

  • M152 Mic: Impedance

    3 k (2-6k)

  • M152 Mic: Polar Pattern

    Omnidirectional

  • M152 Mic: Freq Range

    20 - 20000Hz

  • M152 Mic: Max Operating Voltage

    10V

  • M152 Mic: Standard Operating Voltage

    2V

  • M152 Mic: Current Consumption

    30uA at 1.3V

  • M152 Mic: Signal/Noise Ratio

    More than 38dB

  • MCSRXLR Cable: Length

    12" / 30.48cm

  • MCSRXLR Cable Connector: Length

    TA3F plug to 3 pin male XLR

  • MCLRTRS Cable: Connector 1

    3.5mm / 0.14" TRS

  • MCLRTRS Cable: Connector 2

    TA3F

  • MCLRTRS Cable: Length

    20" / 50.80cm

  • CCMINI Case: Material

    Vinyl

  • CCMINI Case: Type of Closure

    Zipper

  • CCMINI Case: Carrying/Transport Options

    Carrying handle

  • Dimensions

    LR Receiver (Housing): 3.21 x 2.45 x .84" / 81.53 x 62.23 x 21.34mm
    LT Transmitter (L x W x H): 2.85 x 2.45 x 0.75" / 72.39 x 62.23 x 19.05mm
    CCMINI Case Interior (L x W x H): 10 x 7.0 x 2.0" / 254.00 x 177.80 x 50.80mm

  • Weight

    LR Receiver: 185.4g / 6.54oz with two AA lithium batteries
    LT Transmitter: 5.9oz / 167.26g with alkaline AA batteries

About Lectrosonics ZS-LRLT

Take your audio and video production to the next level with the ZS-LRLT-A1 L Series Kit. This comprehensive kit includes an LR Receiver, LT Beltpack Transmitter, M152 Mic, LRSHOE Camera Shoe Mount, and a CCMINI Case, all operating within a frequency band of 470.100-537.575MHz.

The L Series units in this kit boast a wide tuning range of three standard Lectrosonics blocks or 67.5 to 76.8 MHz, depending on the specific frequency band. They utilize Lectrosonics' patented Digital Hybrid Wireless technology, ensuring compandor-free audio and compatibility modes for seamless interoperability with older analog systems.

Crafted in the USA, these L Series units are housed in durable machined aluminum, ensuring longevity and reliability. The user-friendly setup makes it easy to get these products working for you right away. The ZS-LRLT kit provides everything you need for professional audio and video production, including transmitter, receiver, mounting hardware, lav mic, and connecting cables. Batteries are even included for your convenience.

The LR Receiver in this kit is compact yet powerful, designed to deliver excellent performance for ENG and DSLR video production. It features tracking front-end filters to block interference from high powered RF signals on nearby channels, preserving extended operating range. The receiver is powered by internal AA batteries or an optional battery eliminator, and includes an IR port for transmitter setup. Firmware updates are easily enabled via a USB port on the side panel.

The LT Belt-Pack Transmitter, also included in the kit, covers three standard frequency blocks and offers selectable 50 or 100mW output power. It's compatible with all Digital Hybrid Wireless receivers and even some from other manufacturers, making it a versatile choice for a variety of applications.

Also included in the kit is the M152/SM5P High-performance omnidirectional lav mic, which features a 5-pin plug with water/dust sleeve for added protection. The LRSHOE accessory shoe allows for easy mounting of the LR receiver on DSLR type cameras. The kit also comes with a soft-sided, padded CCMINI carrying case for compact wireless systems, ensuring safe and convenient transport.

In summary, the ZS-LRLT-A1 L Series Kit is a comprehensive solution for professional audio and video production, offering superior performance, versatility, and durability.

Lectrosonics ZS-LRLT Features

  • Comprehensive audio and video production kit including LR Receiver, LT Beltpack Transmitter, M152 Mic, and more
  • Wide tuning range with patented Digital Hybrid Wireless technology for compandor-free audio
  • Durable machined aluminum housing for all L Series units, crafted in the USA
  • User-friendly setup with all necessary hardware, cables, and even batteries included
  • LR Receiver designed for excellent performance in ENG and DSLR video production
  • Versatile LT Belt-Pack Transmitter compatible with all Digital Hybrid Wireless receivers and some from other manufacturers

Warranty Information

This product has a limited warranty of 12 months.

Product Documents

User Manual

Key Features

  • Wide tuning range with patented Digital Hybrid Wireless technology for compandor-free audio
  • Durable machined aluminum housing for all L Series units, crafted in the USA
  • User-friendly setup with all necessary hardware, cables, and even batteries included
  • LR Receiver designed for excellent performance in ENG and DSLR video production

What's in the box:

  • Lectrosonics LR Receiver
  • LT Beltpack Transmitter
  • M152 Omnidirectional Lavalier Microphone
  • LRSHOE Camera Shoe Mount
  • MCLRTRS Audio Patch Cord
  • MCSRXLR TA3 to XLR Cable
  • CCMINI Zippered Carrying Case
  • Lectrosonics 1 Year Limited Warranty