Lian-Li LANCOOL 215 ATX Mid-Tower Case, Black

Unobstructed Airflow
LANCOOL 215 features two pre-installed 200mm ARGB fans and a 120mm fan, combining with mesh panels, honeycomb vents enable efficient ventilation.

Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.

LANCOOL 215 Unobstructed Airflow
LANCOOL 215 features two pre-installed 200mm RGB fans and a 120mm fan, combining with mesh panels, honeycomb vents enable efficient ventilation.

Optimized Thermal Management
Mesh Intakes Spanning the Front Panel Guarantee Sufficient Airflow in and out of the System.

Included Fans
Pre-installed fans ensure the case runs at peak performance.

Honeycomb Vents
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.

Multi Cooling Systems Support
Supports a maximum of 7 fans and radiators in various sizes and configurations. You make the call!

Front Panel(interior)
• 3x 120mm fans
• 2x 140mm fans
• 280mm radiator with max 70mm thick
• 360mm radiator with max 70mm thick

Top Panel
• 2x 120mm fans
• 2x 140mm fans
• 240mm radiator with max 55mm thick
• 280mm radiator with max 55mm thick

Bottom Panel (on top of the PSU shroud)
2x 120mm fans

Ultimate Cooling System Scenario
With two 200mm fans mounted outside of the frame, you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don't worry about the fan screws, they won't interfere with the radiator.

Move Air Stylishly With ARGB Effects
Two 200mm fans are equipped with LED lights which create a dazzling effect through the mesh panel.

Experience ARGB Control Via One Button
The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.

Highlighted Logo
The LIAN LI logo glows in sync with the fans

ARGB Synchronization With the Motherboard
Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.

Effortless Cable Management

Plenty Of Space For Cable Management
The 22mm thick space behind the motherboard ensures the cables fit in well.

Pre-Installed Fan Hub
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.

Keep The Cable Nice And Neat
The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Self-Securing Closure straps, simplify cable management.

Storage & Motherboard Support Room For 4 Storage Drives
• Removable/Adjustable Cage Supports
• 2x 3.5" HDD OR 1 x 3.5" HDD + 1 x 2.5" SSD
• 2x SSD Support Behind the Motherboard

E-ATX Motherboard Compatible
Fits motherboards with a maximum width of 280mm.

Simple Dust Management
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.