Overview
Compare
Q&A

Questions & Answers

Shopper : Will a Nikon 35mm/1.8 fit with a cap on both ends fit?PETER M : Depends on which Nikon 35mm / 1.8 you are referencing. The Nikkor AF-S -DX will not fit; it is too long. The Nikkor AF-S ED will fit.PAUL S : yes, it will... in fact, a 35mm ƒ 1.8 AF-S G DX (which is what I use the case for...) will fit with both caps and an HR-2 lens hood.LESTER G B : Yes, with both end caps and accompaning hood; a little snug, but works fine. Also, works well with Nikon 50mm lens. Excellent little lens case.CHARLES C : Yes it will......
Samyak J : Will it fit a Canon EF 50mm f1.8 II with filter and both caps on and a lens hood reversed ?PAUL S : (please note: I've never tried this particular lens, being a Nikon addict...) That said, it certainly fits a Nikon 50mm ƒ 1.8 with both caps and a filter... The hood will probably fit reversed, too. (My HR-2 semi-fits, collapsed)LESTER G B : Not sure about Canon lens, but Nikon AF 50mm f/1.8 with filter and both caps on fits great ... with a little space around which looks like it would accommodate a lens hood reversed (I do not have a lens hood for this lens). The dimensions of my lens: 2 3/8" (60 mm) diameter x 2 5/8" (68 mm) length. This is a great case: well made, zipper works easily, compact, well padded. I really like it. Hope this helps.CHRIS K : I'm a nikon shooter, but it fits my 16mm fisheye perfect. Very tight for my 50mm 1.4.DAVID R : Yes. It fits my 1.8.
joseph m : I have a canon 18-55 lens with lens caps on both ends will it fit in this case?MICHAEL R : I bought it for my Canon 50mm lens because it was the smallest lenspro case of its kind that I could find. Don't know about the 18-55.GARY L : I don't have that lens, but the case is a about 2.3 inches in height and a little over 3 inches in diameter. Measure your lens height and the diameter at the widest part. If it barely fits, I'd go up one size on the case. Better to have a little extra room, I think.PETER M : It's a small case, don't know the dimensions of your lens but the inside dimensions of the case are 3"diameter by 2.4" high.ELIZABETH B : I have a Nikon 18-105mm. It will not fit. The only lens I have which will fit is the 50 mm.CHRIS K : Don't know how big that lens is but to compare, I can fit my 50mm or my 16mm fisheye just fit.DAVID R : Yes, the kit lens 18-55 with the caps on both ends will fit inside. If you have a hood attached, you'd have to remove it first. PABLO A : Definitely not. I had a similar lens at the time I bought this case (only it was the Nikon version), so I had the chance to try, and there's not way it'll fit because the padding is so thick. The case is only for a small prime, like the 35mm f1.8 or the 50mm f1.8 or f1.4.

Reviews about this item

Review Summary

2015-12-11T07:55:12

Rated 5 out of 5

Very sturdy

Very sturdy little case. "Little" is important to remember ... it won't fit much more than a pancake lens. But I have two very sharp Canon pancakes and want them to be safe so this is an ideal choice, and at a very good price.

JOHN C.

2014-05-13T21:00:00

Rated 5 out of 5

Snuggly holds my teleconverter

Great product, holding my teleconverter snuggly and can attach to my lens belt.

Joan

2013-03-06T19:00:00

Rated 5 out of 5

Keeps my lenses safe

Keeps my 50mm lens safe and can safely attach to my belt or my camera case. Perfect for keeping my lenses handy when I'm traveling.

PETER G.

2012-06-27T21:00:00

Rated 5 out of 5

great for a prime lens carry case

Very nice item to store a 50mm prime lens and to carry with you until you need it.

Moonlight P.

2012-05-15T21:00:00

Rated 5 out of 5

Works for me!

I bought this case for my Canon 50mm lens, and the 9x13cm for my 18-135mm and 55-250mm lenses. The 50mm fits very snugly in this case. The case is pretty well padded and the lens doesn't move around. The velcro is very sturdy. I can hang two of these cases on my Lowepro Toploader Zoom 50 case, one on each side, and they are not loose. I have no fear that they'll fall off. The combination of that camera case and these lens cases are perfect for my needs.

DEBRA J.

2012-02-26T19:00:00

Rated 4 out of 5

Perfect for Nikon Teleconverter

This case is almost perfect for a Nikon TC. I had to add a small piece of foam rubber to the case to keep the lens from moving inside the case. Other than that, it meets my needs well.

Robert M.

2012-02-20T19:00:00

Rated 1 out of 5

Does not fit Nikon 50/1.4G!!!

I bought this case for my Nikon 50mm/1.4G and Nikon 35mm/1.8G. Not sure if person who designed this case has ever seen one of these. Forget fitting them in with front and rear lens caps mounted (I never carry my expensive lenses without plastic caps), to say nothing about filters!! 35mm can only fit with both caps dismounted with no extra room at all (and it's very tight fit indeed).

vlady

2011-09-30T21:00:00

Rated 4 out of 5

Perfect for teleconverter

I had to add some foam padding in the case to keep my teleconverter from moving within the case. Once I did that, it worked fine for a 1.4x TC.

Robert M.

2011-09-03T21:00:00

Rated 5 out of 5

Fits Canon 28mm 1.8 50mm 1.4

I own 2 of these, they fit the canon primes well and even accommodate them with reversed lens hoods.

JONATHAN S.

About Lowepro 8 x 6cm Lens Case, Black

FEATURED REVIEWS

Works for me!

By DEBRA J.

I bought this case for my Canon 50mm lens, and the 9x13cm for my 18-135mm and 55-250mm lenses. The 50mm fits very snugly in this case. The case is pretty well padded and the lens doesn't move around. The velcro is very sturdy. I can hang two of these cases on my Lowepro Toploader Zoom 50 case, one on each side, and they are not loose. I have no fear that they'll fall off. The combination of that camera case and these lens cases are perfect for my needs.

Fits Canon 28mm 1.8 50mm 1.4

By JONATHAN S.

I own 2 of these, they fit the canon primes well and even accommodate them with reversed lens hoods.

Lowepro 8 x 6 cm Lens Case is specially designed to protect your expensive lens. It is built using thick, one-piece foam padding to provide superior, allover protection for fragile glass and mounts. Lowepro's OverLap Zipper construction safeguards a lens from dust and moisture. A SlipLock attachment tab with hook/loop fasteners secures the case to a compatible bag, belt or loop and expands your carrying capacity.

Dual zippers provide easy access to the case and when a lens is in use, you can store its cap in the convenient mesh pocket located inside the lid. The Lens Case 8 x 6cm fits a lens up to 8cm in diameter by 6cm in height. Lowepro's Lens Case collection is crafted of durable, water-resistant materials light in weight, yet sturdy and protective.