Flashpoint Clamp with small Ball & Socket Head

SKU: LTCC

This item is no longer available.

Overview
Compare
Protection
Q&A

Questions & Answers

STEVE W : How wide does the clamp open? Can it clamp onto a 1.75-inch thick piece of wood?WILLIAM R : Not quit, it's a very strong clip but the maximum bite is 1.5".RON M : The clamp I have will just fit a 1.5" thick piece.Jeffrey P : Hi Steve, this clamp will open to 2 1/4 inches so you should be good.JERRY C : The clamp will open just slightly more than two inches. HTHJOHN H : Fits quite well for up to 2 1/8 inches. The ball head works well, but if your are using it for an off camera speedlite flash, make sure that you have something that will attach to the 1/4 inch screw mount and hold a flash hot shoe. I know the Canon speedlites come with a free base that will screw in and hold the flash, otherwise get a Frio Cold Shoe.CARL K : NoPHILIP O : I,ve used it on a 2x4 which I think is 1.75".NATHAN C : I sent mine back. It's a piece of garbage. I wouldn't put anything of value on it because it is not built well and is like to fall apart like mine did.SCOTT T : NoFABRIZIO C : The thickest I had to go was 1.5 inches. 1.75in might works but also depends on the surface. FabANDREW D : Hello: This clamp will open to about 1.75 inches so 1.5 inches is an ideal width for a piece of wood. Hope that helps, Andrew Darlow Editor, The Imaging BuffetDENISA N : Yes it can but it will not hold so tightly. RON R : Yes it will open up that much.GERARDO V : Flashpoint Clamp is excellent tool , i used the GO PRO 3 with my tripod mount adapter, works great, i also us the flash point adapter with my canon Flash , this clamp is verry strong grip. go tool and excellent price At AdoramaJohn A : I doubt it, use a regular clamp from home depot then clamp this to that one
Shopper : Why Did You Choose This?LAWRENCE R : Great clamp for setting up a flash without having to use a light stand.KEN S : Its strong clamp onto your finger and u know it. Good Finnish. The little ball head works though its not designed to swivel well under load. Using a frio with it for off camera flash. Nice little clamp.

Reviews about this item

Review Summary

2013-01-17T19:00:00

Rated 3 out of 5

Pads Loose

I glued the pads back in place.

CHARLES P.

2011-11-27T19:00:00

Rated 4 out of 5

Great Handy Anywhere Flash Holder

I use this product in place of the Justin Clamp from Manfrotto - it was cheaper so I could by two of them. They do the job just fine, but MAN, the rubber grip on the clamp stinks. So I keep the clamps in a ziplock bag - no big deal. I put the clamps with flash on the top of the glass at either end at hockey rinks so I can get flash power and additional light during sports shooting - need pocket wizards of course for this. Also great for fill flash for portraits - allows you to attach flash to back of a chair, edge of a table, lamp post, etc. so you can get your flash off camera. I just wish the ball joint was a bit beefier - seems a bit wobbly. Worried it's going to fail on me one day.

Sunny K.

2011-09-05T21:00:00

Rated 5 out of 5

Good lighting accessory.

To be used for additional fill lighting.

jim

2011-09-04T21:00:00

Rated 5 out of 5

Great clamp, even better price

Put the flash on the stand, attach it to the ball-head on the clamp, that's it, clamp it to whatever you want.

DerekPK

2011-09-03T21:00:00

Rated 3 out of 5

Good For The Price

I've only used these (I have two) a few times. Will they hold up? Not sure yet. Do the job now but won't support a lot of weight

Daryl B.

About Flashpoint Clamp with Small Ball and Socket Head

FEATURED REVIEWS

Good lighting accessory.

By jim

To be used for additional fill lighting.

Great clamp, even better price

By DerekPK

Put the flash on the stand, attach it to the ball-head on the clamp, that's it, clamp it to whatever you want.

Clamp this on your table or pole and you can mount a camera on it. Will also wokr on car windows. Good for compact cameras or pocket wizard.