
See Options
2 Year
$219.99
3 Year
$349.99
5 Year
$689.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
2x Telescoping Antennae (72 MHz)
2x Flexible Antenna (72 MHz)
2x Hex Kep Nuts
2x Fiber Washer
4x Machine Screw (#8-32½ 3/4")
4x Tapping Screw (#8-1/2")
4x Dry Anchors
Owner's Manual
Left Side Bracket
Right Side Long Bracket
Right Side Short Bracket
Dual Mount Center Bracket
10x Machine Screws
Quick Reference Card
LPT-A107-B Dual RCA to Dual RCA Cable 6.6' (2m)
2x LR-4200-072 Intelligent DSP RF Receiver (72 MHz)
2x LA-401 Universal Ear Speaker
LA-434 Earphone Extension Cable
2x LA-430 Intelligent Ear Phone/Neck Loop Lanyard
2x LA-423 4-Port USB Charger
4x LA-422 USB to Micro USB Cable
Terminal Block: Two analog inputs, rear panel, one terminal block connector per input, balanced, +4 dBu (line) nominal input level, +16 dBu maximum input level, impedance 100k ohm
RCA: Two analog inputs, rear panel, one dual summing RCA connector per input, unbalanced, -10 dBu (line) nominal input level, +2 dBu maximum input level, impedance 100k ohm
RJ-45 supports 10/100/1000 Mbps speed. Green LED flashes at 100 Mbps, Yellow LED flashes at 1000 Mbps.
Type A 2.0 (female)
5 VDC Barrel
100-240 VAC, 50-60Hz
5 VDC
6.0 A
30 W
North American, UK, EU, AUS
DHCP, Static, Reserved
QoS/ToS
1000 (per server)
2 mono (1 stereo)
802.11n or better w/ WMM enabled
2.4 GHz & 5 GHz
Approx. 140 kbps per user
iOS/Android
Yes
FCC, CE, RoHS
1.77 x 6.69 x 3.94" (45 x 170 x 100mm)
20.8 oz (590g)
LW-100P-02/LW-200P-04/LW-200P-08/LW-200P-12/LW-200P-16/MX5-1/MX3-4/MX3-8/MX3-12/MX3-16
50 Hz - 15 kHz ( +/-3 dB)
SQ enabled 80 dB, SQ disabled 60 dB
Rear panel, one (1) Female XLR or 1/4 in combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1k ohm (line/mic), phantom power +12 VDC
Rear panel, two (2) phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k ohm
Compression can be turned on/off, slope internally adjustable from 1:1 to 4:1, default 2:1
Cuts and boosts frequencies above 5 kHz
< 2% total harmonic distortion (THD) at 80% deviation
Input 1 and input 2, mixed output (rear panel), two (2) phono connectors, unbalanced, -10 dBu nominal output level, +15 dBu maximum, impedance 10 ohm
Front panel, one (1) 3.5 mm (0.14 in.) stereo connector, unbalanced, adjustable output level, +3 dBu maximum, impedance 10 ohm
Front Panel: Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume controlRear Panel: Input 1 Level, (Line, Mic, Mic-Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high)
Compression ratio for audio processor
SQ on/off, process on/off, channel lock
Channel designation, lock status, RF power level, programming (front panel)
Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red)
Indicated by a green LED when on (front panel)
Red LED illuminates when test tone is enabled.
Indicated on the LCD (low, mid, high)
72.025 - 75.950 MHz
17 wide band, 40 narrow band
+/- .005% stability +32 Degree to +122 Degree F (0 Degree to +50 Degree C)
Various antennas available
50 PPM
Up to 305 m (1,000 ft.)
BNC
80,000 uV at 3 m
6
In line power supply, Listen part number LA-207 (Line cord is determined by the each Country's AC power standards)
100-240 VAC, 50-60 Hz, 0.4 A
12 VDC, 1.3 A, 15.6 W
0.02" (5mm) OD, 0.01" (2.5mm) ID, barrel type
UL, CE, GS, TUV, RoHS
Operation: 14 F to 104 Degree F (-10 C to +40 Degree C)
Storage: -4 F to 122 Degree F (-20 C to +50 Degree C)
0 to 95% relative humidity, non condensing
RoHS
FCC Part 15, Part 90, Industry Canada
Black with gray silk screening
LR-300-072/LA-125/LA-130/LA-326/LR-100-072/LR-400-072/LR-500-072/LA-277/LA-304/LR-4200-072/LR-5200-072-P1/LR-5200-072/LR-4200-072-P1/LP-40-072-01/LP-41-072-01/LP-50-072-01/LP-51-072-01/LA-303/MH-5200-072/MH-4200-072/MH-4200-072-P0/MH-4200-072-P1
LA-101/LA-106/LA-116/LA-122/LA-123/LA-125
One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitters can be mounted in one rack space, optional rack mount (LA-326)
8.50 x 9.13 x 1.75" (21.5 x 23 x 4.5cm)
2.6 lb (1.2kg) (with Power Supply)
LT-800-072-01/LT-803-072-01/MH-800-072-01/LT-800-216-01/LT-82/LT-700-072/LT-700-216
Hard Plaque: 7 x 10" (178 x 254mm)
Soft Cling: 7 x 10" (178 x 254mm)
6 oz. (170 g)
BNC
72 MHz - 72.025 MHz - 75.975 MHz216 MHz - 216.0125 MHz - 216.9875 MHz
72 MHz - 57 (17 wide band, 40 narrow band)216 MHz - 57 (19 wide band, 38 narrow band)
Monopole and Dipole
0 dB
Range up to 305 m / 1,000 ft @72 MHz, 914 m / 3,000 ft @216 MHz.
LT-800-072-01/LR-100-072/LT-803-072-01/LT-800-216-01/LR-100-216/MH-800-072-01
Wall mount, dual and single electrical box, ceiling electrical box, horizontal surface mount (such as on top of a rack), ceiling/inverse mounting, flexible mounting in-wall or in ceiling and mast or conduit mount.
Includes self-tapping sheet metal screws, drywall anchors, and all hardware required to mount to electrical boxes. Does not provide hardware required to mount to a mast (available at most hardware stores).
72 MHz - 80" (203.2cm), 216 MHz - 27" (68.6cm)
Mounting Bracket: 4.5 x 7.0 x 2.5" (11 x 18 x 6.4cm)
Grounding Base: 8 x 8 x 2" (20.4 x 20.4 x 5.1cm)
Mounting Plate: 4.48 x 4.55" (11.4 x 11.6cm)
4.4 lb (2.0kg)
Rack Mount: 19.0 x 1.75 x 8" (48.3 x 4.4 x 20.3cm)
4.4 lb (2.0kg)
Dual RCA (male) to Dual RCA (male)
6.6' (2m)
1.75 oz (49g)
< 2% total harmonic distortion (THD) at 80% deviation
Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
50 Hz - 15 kHz ( +/-3 dB)
SQ enabled 80 dB, SQ disabled 60 dB
Power, up/down volume
Via software and USB port
Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
Flashes when batteries are low or to indicate charging, solid when fully charged
Channel designation, battery level, unit number, charging status
72.0250 - 75.9500 MHz
17 wide band, 40 narrow band
.6uV typical, 1 uV maximum for 12 dB sinad
+/- .005% stability 32 to 122 Degree F (0 to 50 Degree C)
Programmable in 20 steps, automatic on loss of RF signal
Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
Micro USB connector, 5 V, 500 mA
Lithium Ion 3.7 Vdc, 1200 mAh
8 Hours of continuous use
Fully charged in 2.5 Hours
Operation: 14 F to 104 Degree F (-10 C to +40 Degree C)
Storage: -4 F to 122 Degree F (-20 C to +50 Degree C)
0 to 95% relative humidity, non-condensing
FCC Part 15, Part 90, Industry Canada, RoHS
Black
LT-800-072-01/LT-700-072
LA-401/LA-381/LA-405/LA-404/LA-403/LA-402/LA-380/LA-430/LA-423/LA-422/LA-421
3.75 x 2.00 x 0.64" (9.6 x 5 x 1.7cm)
With Belt Clip: 3.75 x 2.00 x 0.8" (9.6 x 5.0 x 2.1cm)
1.60 oz (45g)
with Batteries: 2.40 oz (68g)
20 Hz - 20 kHz
32 ohm +/- 15% @ 1 kHz
115 dB +/- 4dB @ 1 kHz, 1 mW
50 mW
100 mW
Male 3.5 mm (TRS)
RoHS
Dark Gray
LR-300-072/LR-44/LR-200-072/LR-400-072/LR-500-072/LP-IL-1/LR-IL-1/R32/R8/LR-400-216/LR-500-216/LR-4200-072/LR-5200-216/LR-5200-072/LR-4200-216/MH-5200-072/MH-4200-072/LR-4200-IR/LR-5200-IR
13" (33cm)
Extension cable: 28" (71cm)
0.40 oz (11g)
Male 3.5 mm (TRRS) to Male 3.5 mm (TRRS)
Female 3.5 mm (TRS)
400 mA/m (+/- 3dB)
100Hz to 5kHz (+/- 3 dB ref 1kHz)
RoHS, IEC60118-4
Black
LR-4200-072/LA-401/LA-405/LA-404/LA-403/LA-402/LR-5200-216/LR-5200-072/LR-4200-216MH-5200-072/MH-4200-072/LR-4200-IR/LR-5200-IR
29" (74cm)
1.50 oz (43g)
100-240 V, 50-60 Hz, 0.5 A
Output5.0 VDC, 4.2 A
UL, FCC, RoHS
Black
LA-422
36" (92cm)
4 - USB to Micro USB Cables (LA-422)
2.44 x 2.90 x 1.13" (62 x 74 x 29mm)
7.80 oz (221g)
An innovative fusion of Wi-Fi and RF technology, the Wi-Fi/RF Advanced System is a sophisticated solution designed to deliver compliant audio coverage, enhanced by the convenience of smartphone and tablet connectivity. This comprehensive package includes the LW-100P-02 LE 2 Channel Wi-Fi Server, which seamlessly integrates with existing Wi-Fi networks to stream high-quality audio directly to users via a free mobile app. The cloud-based management system simplifies system oversight, offering updates and customization options, such as personalized welcome messages and promotional content, to engage your audience effectively.
The system also features the LT-800-072-01 Stationary RF Transmitter, renowned for its exceptional audio clarity and robust digital signal. With 57 selectable channels, it ensures a versatile and reliable audio broadcast to both belt pack and stationary receivers, making it an ideal choice for a multitude of applications. The transmitter's intuitive Look & Listen LCD display provides immediate channel and programming information, while the balanced and unbalanced audio inputs accommodate any audio source. The built-in auto processor tailors the audio for optimal transmission, and the VU level meter and test tone facilitate effortless installation and setup.
Included in this advanced system are two LR-4200-072 Intelligent DSP RF Receivers, which set the standard for audio clarity and reception quality. Their compact design ensures user comfort, while the integrated neck loop/lanyard and dual 3.5mm output jacks offer flexibility for individual or shared use. The receivers boast advanced Lithium-ion batteries for extended use and an OLED display for clear readouts of charge status and channel information.
To ensure your venue meets assistive listening regulations, the LA-304 Assistive Listening Notification Signage Kit provides clear signage to inform visitors of the system's availability. The LA-122 Universal Antenna Kit and LA-326 Universal Rack Mount Kit offer versatile installation options and streamlined integration into standard audio racks, respectively.
For user convenience, the LA-401 Universal Ear Speaker and LA-430 Intelligent Ear Phone/Neck Loop Lanyard deliver high-quality audio and can be used with hearing aids, ensuring a universally accessible listening experience. The LA-423 4 Port USB Charger rounds out the system, offering a compact and efficient charging solution for up to four iDSP devices.
This high-tech Wi-Fi/RF Advanced System from Listen Technologies is the perfect choice for venues seeking to provide a sophisticated, flexible, and user-friendly listening experience, while adhering to ADA & IBC assistive listening requirements.