
See Options
2 Year
$179.99
3 Year
$249.99
5 Year
$489.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
LA-122 Universal Antenna Kit Including (Grounding Base + Mounting Bracket + Wall/Electrical Box Mounting Plate + Shorting Plate + Antenna Module + 25' (7.6m) Coaxial Cable (Terminated with BNC Connectors on Both Ends) + 2x Telescoping Antenna (72 MHz) + 2x Flexible Antenna (72 MHz) + 2x Hex Kep Nuts + 2x Fiber Washer + 4x Machine Screw (#8-32 x3/4") + 4x Tapping Screw (#8-1/2") + 4x Dry Anchors
Hard Plaque
Static Cling Window Sticker
LA-326 Universal Rack Mounting Kit Including (Left Side Bracket + Right Side Long Bracket + Right Side Short Bracket + Dual Mount Center Bracket + 10x Machine Screws + Quick Reference Card)
LPT-A107-B Dual RCA to Dual RCA Cable 6.6' - Stereo 3.5 mm to Dual RCA 6.6' - Dual RCA to Dual RCA 6.6' - Stereo 3.5 mm to Stereo 3.5 mm 19.67" - Two 3.5mm to one Euro Connector 6.6'
50 Hz - 15 kHz ( +/-3 dB)
62 dB (A-Weighted)
Input 1: Rear panel, one (1) Female XLR and 1/4 in combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1k ohm (line/mic), phantom power +12 VDC
Input 2: Rear panel, two (2) phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k ohm
Compression can be turned on/off. Slope internally adjustable from 1:1 to 4:1. Default 2:1
Cuts and boosts frequencies above 5 kHz
< 2% total harmonic distortion (THD) at 80% deviation
Input 1 and input 2, mixed output (rear panel), two (2) phono connectors, unbalanced, -10 dBu nominal output level, +15 dBu maximum, impedance 10 ohm
Front panel, one (1) 3.5 mm (0.14 in.) stereo connector, unbalanced, adjustable output level, +3 dBu maximum, impedance 10 ohm
Front Panel: Power, Test Tone on/off, Channel up/down, Input Levels, Mix Level, Contour, Monitor volume controlRear Panel: Input 1 Level, (Line, Mic, Mic-Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high)
Compression ratio for audio processor
Process on/off, channel lock
Channel Designation, lock status, RF power level (front panel)
Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red)
Indicated by a green LED when on (front panel)
Red LED illuminates when test tone is enabled
Indicated on the LCD (low, mid, high)
(A) 72.100, (E) 72.900, (H) 75.900
3 wide band
+/- .005% stability 0 to 50 Degree C (32 to 122 Degree )
Various antennas available
50 PPM
Up to 305 m (1,000 ft.)
BNC
80,000 uV at 3 m
In line power supply, Listen part number LA-207 (Line cord is determined by the each Country's AC power standards)
Input: 100-240 VAC, 50-60 Hz, 0.4 A
Output: 12 VDC, 1.3 A, 15.6 W
5.0 mm (0.02 in.) OD, 2.5 mm (0.01 in.) ID, barrel type
UL, CE, GS, TV, RoHS
Operation: 14 to 104 Degree F (-10 to 40 Degree C)
0 to 95% relative humidity, non condensing
FCC Part 15, Part 90, Industry Canada
Dark Gray with white silk screening
Remote Antenna Kit 25 ft. (7.6 m)
Standard 3-Channel RF Receiver (72 MHz)
One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitters can be mounted in one rack space,optional rack mount (LA-326)
8.50 x 1.75 x 9.13" (21.5 x 4.5 x 23cm)
Without Power Supply: 2.6 lb (1.2kg)
With Power Supply: 4.5 lb (2kg)
BNC
72 MHz - 72.025 MHz - 75.975 MHz216 MHz - 216.0125 MHz - 216.9875 MHz
72 MHz - 57 (17 wide band, 40 narrow band)216 MHz - 57 (19 wide band, 38 narrow band)
Monopole and Dipole
0 dB
Range up to 305 m / 1,000 ft @72 MHz, 914 m / 3,000 ft @216 MHz.
Wall mount, dual and single electrical box, ceiling electrical box, horizontal surface mount (such as on top of a rack), ceiling/inverse mounting, flexible mounting in-wall or in ceiling and mast or conduit mount.
Includes self-tapping sheet metal screws, drywall anchors, and all hardware required to mount to electrical boxes. Does not provide hardware required to mount to a mast (available at most hardware satores).
Stationary RF Transmitter (72 MHz)
Stationary 3-Channel RF Transmitter (72 MHz)
72 MHz: 80" (203.2cm), 216 MHz: 27" (68.6cm)
Bracket (W x D x H): 4.5 x 7.0 x 2.5" (11 x 18 x 6.4cm)
Grounding Base (W x D x H): 8.0 x 8.0 x 2.0" (20.4 x 20.4 x 5.1cm)
Mounting Plate: 4.48 x 4.55" (11.4 x 11.6cm)
4.4 lb (2.0kg)
Rack Mount: 19.0 x 1.75 x 8.0" (48.3 x 4.4 x 20.3cm)
4.4 lb (2.0kg)
< 1% total harmonic distortion (THD) at 80% deviation
Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 50 mW maximum, impedance 32 ohm
50 Hz - 15 kHz ( +/-3 dB)
SQ disabled 70 dB, SQ enabled 80 dB
Power, up/down volume
Via software and USB port
Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
Flashes when batteries are low or to indicate charging, solid when fully charged
72.0250 - 75.9500 MHz
Basic Mode: 3 wide Band, Expand Mode: 17 wide band
.6uV typical, 1 uV maximum for 12 dB sinad
+/- .005% stability 32 to 122 Degree F (0 to 50 Degree C)
Fixed level, automatic on loss of RF signal
Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
Lithium Ion 3.7 Vdc, 1200 mAh
24 Hours of continuous use
Fully charged in 2.5 Hours
Micro USB connector, 5 V, 500 mA
Operation: 14 to 104 Degree F (-10 to 40 Degree C)
Storage: -4 to 122 Degree F (-20 to 50 Degree C)
0 to 95% relative humidity, non-condensing
FCC Part 15 Class B, Industry Canada ICES-3 (B), RoHS
Black
Stationary RF Transmitter (72 MHz)
Portable Display RF Transmitter (72 MHz)
Stationary 3-Channel RF Transmitter (72 MHz)
Without Belt Clip: 3.75 x 2.00 x 0.64" (9.6 x 5 x 1.7cm)
With Belt Clip: 3.75 x 2.00 x 0.80" (9.6 x 5.0 x 2.1cm)
Without Batteries: 2.40 oz (68g)
With Batteries: 1.60 oz (45g)
20 Hz - 20 kHz
32 ohm +/- 15% @ 1 kHz
115 dB +/- 4dB @ 1 kHz, 1 mW
Rated: 50 mW
Max: 100 mW
Male 3.5 mm (TRS)
RoHS
Dark Gray
Portable Digital RF Receiver (72 MHz)
IR Lanyard 4-Channel Receiver
Standard 3-Channel RF Receiver (72 MHz)
Portable Display RF Receiver (72 MHz)
Intelligent DSP IR Receiver
Advanced Intelligent DSP IR Receiver
13" (33cm), extension cable is 28" (71cm)
0.40 oz (11g)
Male 3.5 mm (TRRS) to Male 3.5 mm (TRRS)
Female 3.5 mm (TRS)
400 mA/m (+/- 3dB)
100Hz to 5kHz (+/- 3 dB ref 1kHz)
RoHS, IEC60118-4
Black
29" (74cm)
1.50 oz (43g)
Stereo 3.5 mm to Dual RCA: 6.6" (2m)
Dual RCA to Dual RCA: 6.6" (2m)
Stereo 3.5 mm to Stereo 3.5 mm: 19.67" (50cm)
Two (2) 3.5 mm to one (1) Euro Connector: 6.6" (2m)
1 lb (454g)
Input: 100-240 V, 50-60 Hz, 0.5 A
Output: 5.0 VDC, 4.2 A
UL, FCC, RoHS
Black
USB to Micro USB Cable
36" (92cm)
4 - USB to Micro USB Cables (LA-422)
2.44 x 2.90 x 1.13" (62 x 74 x 29mm)
7.80 oz (221g)
Stationary RF Transmitter (72 MHz)
Stationary 3-Channel RF Transmitter (72 MHz)
ListenIR 1-Channel Transmitter
Portable Display RF Transmitter (72 MHz)
Portable Display RF Transmitter (216 MHz)
Hard Plaque: 7 x 10" (178 x 254mm)
Soft Cling: 7 x 10" (178 x 254mm)
6 oz (170g)
Before you invest in a stationary RF system, consider the advanced LS-31 Listen IDSP Essentials Level 2 Stationary RF System. This high-quality, durable product from the reputable brand, Listen Technologies, is designed to enhance your listening centers with its innovative features and comprehensive package.
The LS-31 system includes the LT-803-072-01 3-Channel RF Transmitter, operating at a frequency of 72 MHz. This transmitter ensures clear communication across various settings, making it an ideal choice for businesses or venues requiring one to three channels of assistive listening audio. With universal inputs, it can accommodate nearly any audio source, including mixers, microphones, and MP3 players.
The system also boasts a Look & Listen LCD display for immediate information about channel, lock, and RF power. The digital tuning feature guarantees that the included receivers won't drift off channel, ensuring a strong connection for an enjoyable listening experience.
The package also includes the LA-122 Universal Antenna Kit, suitable for both 72 MHz and 216 MHz systems. This kit comes with all the necessary components to configure several versions of the antenna, and a 25-foot coaxial cable.
The LA-326 Universal Rack Mounting Kit allows for the installation of Listen Technologies' LT-800, LT-803, LT-82, and LR-100 in a standard audio rack. This kit is capable of single or dual-unit mounting, offering flexibility in setup.
The LR-3200-072 Basic DSP RF Receiver, part of our Intelligent Digital Signal Processing (iDSP) line, offers outstanding audio clarity and quality with the best range and reception in its class. This compact unit is equipped with a micro USB connection which can be used with free iDSP software for charging, set up, programming, inventory management, and firmware updates.
The LA-401 Universal Ear Speaker, featuring a comfortable, over-the-ear design, offers high-quality audio performance and freedom of movement. It can be used with hearing aids for a truly universal solution.
The LA-430 Intelligent Ear Phone/Neck Loop Lanyard incorporates an advanced DSP loop driver for an outstanding listening experience, making it easy for your venue or business to meet the legal requirements for assistive listening systems while offering customers and clients an enhanced audio experience.
The LPT-A107 Audio Cable Kit provides multiple cables which are typically used to connect most audio sources to the control unit. The LA-423 4-Port USB Charger offers an easy way to simultaneously charge up to four Listen iDSP products.
Lastly, the LA-304 Assistive Listening Notification Signage Kit helps you achieve compliance with assistive listening regulations while also ensuring that visitors know about your system's availability.
In conclusion, the LS-31 Listen IDSP Essentials Level 2 Stationary RF System is a comprehensive, high-quality solution for your listening center needs.