


See Options
2 Year
$179.99
3 Year
$249.99
5 Year
$489.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
50 Hz - 15 kHz ( +/-3 dB)
SQ enabled 70 dB, SQ disabled 50 dB
Rear panel, one (1) Female XLR or 1/4 in combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1k ohm (line/mic), phantom power +12 VDC
Rear panel, two (2) phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k ohm
Compression can be turned on/off, slope internally adjustable from 1:1 to 4:1, default 2:1
Cuts and boosts frequencies above 5 kHz
< 2% total harmonic distortion (THD) at 80% deviation
Input 1 and input 2, mixed output (rear panel), two (2) phono connectors, unbalanced, -10 dBu nominal output level, +15 dBu maximum, impedance 10 ohm
Front panel, one (1) 3.5mm (0.14") stereo connector, unbalanced, adjustable output level, +3 dBu maximum, impedance 10 ohm
Front Panel: Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume controlRear Panel: Input 1 Level, (Line, Mic, Mic-Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high)
Compression ratio for audio processor
SQ on/off, process on/off, channel lock
Channel designation, lock status, RF power level, programming (front panel)
Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red)
Indicated by a green LED when on (front panel)
Red LED illuminates when test tone is enabled
Indicated on the LCD (low, mid, high)
216.0125 - 216.9875 MHz
19 wide band, 38 narrow band
+/- .005% stability +32 Degree to +122 Degree F (0 Degree to +50 Degree C)
Various antennas available
50 PPM
Up to 3,000' (914 m)
BNC
100 mW (max allowed by FCC)
3
In line power supply, Listen part number LA-207 (Line cord is determined by the each Country's AC power standards)
100-240 VAC, 50-60 Hz, 0.4 A
12 VDC, 1.3 A, 15.6 W
0.02" (5.0mm) OD, 0.01" (2.5mm) ID, barrel type
UL, CE, GS, TUV, RoHS
14 Degree F (-10 Degree C) to 104 Degree F (+40 Degree C)
-4 Degree F (-20 Degree C) to 122 Degree F (+50 Degree C)
0 to 95% relative humidity, non condensing
RoHS
FCC Part 15, Part 90, Industry Canada
Dark Gray with white silk screening
One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitters can be mounted in one rack space, optional rack mount (LA-326)
LA-130, LA-326, LA-277, LA-304, LR-100-216, LR-400-216, LR-500-216, LR-5200-216-P1, LR-5200-216, LR-4200-216-P1, LR-4200-216, LP-40-216, LP-41-216, LP-50-216, LP-51-216, LA-303
8.50 x 1.75 x 9.13" (21.5 x 4.5 x 23cm)
2.6 lb (1.2kg)
With Power Supply: 3.5 lb (1.6kg)
< 2% total harmonic distortion (THD) at 80% deviation
Two (2) 3.5mm (0.14") connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
50 Hz - 15 kHz ( +/-3 dB)
SQ enabled 70 dB, SQ disabled 50 dB
Power, up/down volume
Via software and USB port
Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
White, illuminated when unit is on, flashes when batteries are low or to indicate charging, solid when fully charged
Channel designation, battery level, unit number, charging status
216.0125 - 216.9875 MHz
19 wide band, 38 narrow band
.6uV typical, 1 uV maximum for 12 dB sinad
+/- .005% stability 32 to 122 Degree F (0 to 50 Degree C)
Programmable in 20 steps, automatic on loss of RF signal
Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
Micro USB connector, 5 V, 500 mA
Lithium-ion
8 Hours of continuous use
Fully charged in 2 Hours
14 to 104 Degree F (-10 to 40 Degree C)
-4 to 122 Degree F (-20 to 50 Degree C)
0 to 95% relative humidity, non-condensing
FCC Part 15, Part 90, Industry Canada, RoHS
LT-800-216-01, LT-700-216
Dark Gray
Without Belt Clip: 3.75 x 2.0 x 0.64" (9.6 x 5.0 x 1.7cm)
With Belt Clip: 3.75 x 2.0 x 0.80" (9.6 x 5.0 x 2.1cm)
Without Batteries: 1.6 oz (45.4g)
With Batteries: 2.4 oz (68.1g)
A comprehensive auditory solution, the LS-53-216 Listen iDSP Prime Level I Stationary RF System from Listen Technologies, is engineered to deliver an advanced single-channel assistive listening experience. This sophisticated package includes the high-tech LT-800-216 216 MHz Stationary RF Transmitter and four state-of-the-art LR-4200-216 iDSP receivers, ensuring a seamless setup for providing immediate assistive listening capabilities.
The system's innovative design features a telescoping antenna that extends to offer an exceptional transmitter range, while the included notification signage kit (LA-304) assists in meeting ADA compliance standards. The LS-53 system is further equipped with universal ear speakers and intelligent earphone/neck loop lanyards, which are designed to enhance the listening experience for users with hearing aids and cochlear implants. The package also contains a four-port USB charger and an RCA cable, making it a complete solution for small to medium-sized venues accommodating up to 100 individuals.
Architecturally specified to cater to the hearing-impaired, the RF wireless assistive listening system boasts the capability to broadcast on 57 channels, both wide and narrow band, ensuring frequency agility. The receivers are tuned to a single channel, with a user experience focused on simplicity and ease of use. With a signal-to-noise ratio exceeding 70 dB and an audio frequency response ranging from 50 Hz to 15 kHz (±3 dB), the system promises clear, high-fidelity sound.
The LS-53 system utilizes DSP SQ noise reduction technology to minimize background noise, while a programmable squelch circuit ensures optimal signal clarity. A multi-functional display on the device indicates battery status, inventory number, and channel, providing essential information at a glance. The receivers are designed for versatility, offering the option to be worn with a lanyard or belt clip. The integrated DSP-driven neck loop lanyard delivers optimized audio signals directly to telecoil-equipped hearing aids and cochlear implants, with a field strength of 400 mA/m (±3dB) and frequency response of 100Hz to 5kHz (±3 dB ref 1kHz).
For maintenance and updates, the system features a USB connector used for inventory control, setup, charging, and firmware upgrades. Automatic battery charging circuitry and a non-proprietary lithium-ion battery ensure longevity and ease of use. Multiple charging options are supported thanks to additional charging contacts.
With an end-to-end SNR of 70 dB or greater, the LS-53-216 Listen iDSP Prime Level I Stationary RF System by Listen Technologies Corporation stands out as a reliable and user-friendly assistive listening system, designed to meet the sophisticated audio needs of diverse listening environments.