


See Options
2 Year
$219.99
3 Year
$349.99
5 Year
$689.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
50 Hz - 15 kHz ( +/-3 dB)
SQ enabled 70 dB, SQ disabled 50 dB
Rear panel, one (1) Female XLR or 1/4 in combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1k ohm (line/mic), phantom power +12 VDC
Rear panel, two (2) phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k ohm
Compression can be turned on/off, slope internally adjustable from 1:1 to 4:1, default 2:1
Cuts and boosts frequencies above 5 kHz
< 2% total harmonic distortion (THD) at 80% deviation
Input 1 and input 2, mixed output (rear panel), two (2) phono connectors, unbalanced, -10 dBu nominal output level, +15 dBu maximum, impedance 10 ohm
Front panel, one (1) 3.5mm (0.14") stereo connector, unbalanced, adjustable output level, +3 dBu maximum, impedance 10 ohm
Front Panel: Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume controlRear Panel: Input 1 Level, (Line, Mic, Mic-Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high)
Compression ratio for audio processor
SQ on/off, process on/off, channel lock
Channel designation, lock status, RF power level, programming (front panel)
Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red)
Indicated by a green LED when on (front panel)
Red LED illuminates when test tone is enabled
Indicated on the LCD (low, mid, high)
216.0125 - 216.9875 MHz
19 wide band, 38 narrow band
+/- .005% stability +32 Degree to +122 Degree F (0 Degree to +50 Degree C)
Various antennas available
50 PPM
Up to 3,000 ft. (914 m)
BNC
100 mW (max allowed by FCC)
3
In line power supply, Listen part number LA-207 (Line cord is determined by the each Country's AC power standards)
100-240 VAC, 50-60 Hz, 0.4 A
12 VDC, 1.3 A, 15.6 W
0.02" (5.0mm) OD, 0.01" (2.5mm) ID, barrel type
UL, CE, GS, TUV, RoHS
14 Degree F (-10 Degree C) to 104 Degree F (+40 Degree C)
-4 Degree F (-20 Degree C) to 122 Degree F (+50 Degree C)
0 to 95% relative humidity, non condensing
RoHS
FCC Part 15, Part 90, Industry Canada
Dark Gray with white silk screening
One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitters can be mounted in one rack space, optional rack mount (LA-326)
LA-130, LA-326, LA-277, LA-304, LR-100-216, LR-400-216, LR-500-216, LR-5200-216-P1, LR-5200-216, LR-4200-216-P1, LR-4200-216, LP-40-216, LP-41-216, LP-50-216, LP-51-216, LA-303
8.50 x 1.75 x 9.13" (21.5 x 4.5 x 23cm)
2.6 lb (1.2kg)
With Power Supply: 3.5 lb (1.6kg)
< 2% total harmonic distortion (THD) at 80% deviation
Two (2) 3.5mm (0.14") connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
50 Hz - 15 kHz ( +/-3 dB)
SQ enabled 70 dB, SQ disabled 50 dB
Power, up/down volume, Listen button for end user channel selection
Via software and USB port
Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
White, illuminated when unit is on, flashes when batteries are low or to indicate charging, solid when fully charged
Channel designation, battery level, unit number, charging status
216.0125 - 216.9875MHz
19 wide band, 38 narrow band
.6uV typical, 1 uV maximum for 12 dB sinad
+/- .005% stability 32 to 122 Degree F (0 to 50 Degree C)
Programmable in 20 steps, automatic on loss of RF signal
Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
Micro USB connector, 5 V, 500 mA
Lithium-ion
8 Hours of continuous use
Fully charged in 2 Hours
14 to 104 Degree F (-10 to 40 Degree C)
(-)4 to 122 Degree F (-20 to 50 Degree C)
0 to 95% relative humidity, non-condensing
FCC Part 15, Part 90, Industry Canada, RoHS
LT-800-216-01, LT-700-216
Dark Gray
Without Belt Clip: 3.75 x 2.0 x 0.64" (9.6 x 5.0 x 1.7cm)
With Belt Clip: 3.75 x 2.0 x 0.80" (9.6 x 5.0 x 2.1cm)
Without Batteries: 1.6 oz (45.4g)
With Batteries: 2.4 oz (68.1g)
Be at the forefront of audio technology with the LS-56-216 Listen iDSP Advanced Level I Stationary RF System from Listen Technologies. This comprehensive package includes the high-quality LT-800-216 216 MHz transmitter, a telescoping antenna, and four innovative LR-5200-216 Advanced iDSP receivers.
Designed for immediate installation and operation, this system offers exceptional audio performance and clarity, boasting 20 dB less noise than other RF receivers in the market. Each unit provides multiple channel options, making it an ideal solution for venues requiring language interpretation or alternate audio streams.
The LR-5200-216 receivers are powered by rechargeable Lithium-ion batteries, offering long life and significant cost savings. These batteries can be fully recharged within a mere 2.5 hours, ensuring your system is always ready to deliver superior sound quality.
The LS-56-216 system comes complete with universal ear speakers, neck loops/lanyards, a 4-port USB charger, and an assistive listening notification signage kit. This ensures your venue meets the needs of your customers and remains compliant with regulations.
The system is capable of broadcasting on 57 channels and is frequency agile. The RF receiver can receive on 57 wide and narrow band channels, and the device features a programmable multi-function Listen button that can be tuned to your venue's desired channels.
The receiver boasts a signal-to-noise ratio of 70 dB or greater and an audio frequency response of 50 Hz - 15 kHz (+/-3 dB). It employs unique DSP SQ noise reduction technology and a programmable squelch circuit. The multi-functional display indicates battery status, inventory number, and channel.
The device can be worn with a lanyard or belt clip and features an integrated DSP driven neck loop that sends optimized audio signals directly to hearing aids and cochlear implants equipped with telecoils.
The LS-56-216 system is equipped with a USB connector for inventory control, setup, charging, and firmware upgrades. It incorporates automatic battery charging circuitry and uses a non-proprietary Lithium-ion battery.
Experience the advanced, durable, and comprehensive solution for listening centers with the LS-56-216 Listen iDSP Advanced Level I Stationary RF System.