


See Options
2 Year
$219.99
3 Year
$349.99
5 Year
$689.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
LA-122 Universal Antenna Kit Including (Grounding Base + Mounting Bracket + Wall/Electrical Box Mounting Plate + Shorting Plate + Antenna Module + (25'/7.6m) Coaxial Cable (Terminated with BNC Connectors on Both Ends) + 2x Telescoping Antennae (72 MHz) + 2x Flexible Antenna (72 MHz) + 2x Hex Kep Nuts + 2x Fiber Washer + 4x Machine Screw (#8-32 x3/4") + 4x Tapping Screw (#8-1/2") + 4x Dry Anchors)
LA-326 Universal Rack Mounting Kit Including (Left Side Bracket + Right Side Long Bracket + Right Side Short Bracket + Dual Mount Center Bracket + 10x Machine Screws)
LA-304 Assistive Listening Notification Signage Kit Including (Hard Plaque + Static Cling Window Sticker)
50 Hz - 15 kHz ( +/-3 dB)
SQ enabled 80 dB, SQ disabled 60 dB
Rear panel, one (1) Female XLR or 1/4 in combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1k ohm (line/mic), phantom power +12 VDC
Rear panel, two (2) phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k ohm
Compression can be turned on/off, slope internally adjustable from 1:1 to 4:1, default 2:1
Cuts and boosts frequencies above 5 kHz
< 2% total harmonic distortion (THD) at 80% deviation
Input 1 and input 2, mixed output (rear panel), two (2) phono connectors, unbalanced, -10 dBu nominal output level, +15 dBu maximum, impedance 10 ohm
Front panel, one (1) 3.5mm (0.14") stereo connector, unbalanced, adjustable output level, +3 dBu maximum, impedance 10 ohm
Front Panel: Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume controlRear Panel: Input 1 Level, (Line, Mic, Mic-Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high)
Compression ratio for audio processor
SQ on/off, process on/off, channel lock
Channel designation, lock status, RF power level, programming (front panel)
Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red)
Indicated by a green LED when on (front panel)
Red LED illuminates when test tone is enabled.
Indicated on the LCD (low, mid, high)
72.025 - 75.950 MHz
17 wide band, 40 narrow band
+/- .005% stability +32 Degree to +122 Degree F (0 Degree to +50 Degree C)
Various antennas available
50 PPM
Up to 305 m (1,000 ft.)
BNC
80,000 uV at 3 m
6
In line power supply, Listen part number LA-207 (Line cord is determined by the each Country's AC power standards)
100-240 VAC, 50-60 Hz, 0.4 A
12 VDC, 1.3 A, 15.6 W
0.02" (5.0mm) OD, 0.01" (2.5mm) ID, barrel type
UL, CE, GS, TUV, RoHS
14 Degree F (-10 Degree C) to 104 Degree F (+40 Degree C)
-4 Degree F (-20 Degree C) to 122 Degree F (+50 Degree C)
0 to 95% relative humidity, non condensing
RoHS
FCC Part 15, Part 90, Industry Canada
Dark Gray with white silk screening
One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitters can be mounted in one rack space, optional rack mount (LA-326)
LR-300-072, LA-125, LA-130, LA-326, LR-100-072, LR-400-072, LR-500-072, LA-277, LA-304, LR-4200-072, LR-5200-072-P1, LR-5200-072, LR-4200-072-P1, LP-40-072-01, LP-41-072-01, LP-50-072-01, LP-51-072-01, LA-303, LDS-5200-072, LDS-4200-072, LDS-4200-072-P0, LDS-4200-072-P1
8.50 x 1.7 x 9.13" (21.5 x 1.75 x 23cm)
2.6 lb (1.2kg)
with Power Supply: 3.5 lb (1.6kg)
50 Hz - 15 kHz ( +/-3 dB)
< 2% total harmonic distortion (THD) at 80% deviation
Two (2) 3.5mm (0.14") connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
SQ enabled 80 dB, SQ disabled 60 dB
Power, up/down volume, Listen button for end user channel selection
Via software and USB port
Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
Flashes when batteries are low or to indicate charging, solid when fully charged
Channel designation,battery level, unit number, charging status
72.025 - 75.950 MHz
17 wide band, 40 narrow band
.6uV typical, 1 uV maximum for 12 dB sinad
+/- .005% stability 32 to 122 Degree F (0 to 50 Degree C)
Programmable in 20 steps, automatic on loss of RF signal
Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
Micro USB connector, 5 V, 500 mA
Lithium Ion 3.7 Vdc, 1200 mAh
8 Hours of continuous use
Fully charged in 2.5 Hours
14 to 104 Degree F (-10 to 40 Degree C)
(-)4 to 122 Degree F (-20 to 50 Degree C)
0 to 95% relative humidity, non-condensing
FCC Part 15, Part 90, Industry Canada, RoHS
LT-800-072-01, LT-700-072
Black
3.75 x 2.0 x 0.64" (9.6 x 5.0 x 1.7cm)
with Belt Clip: 3.75 x 2.0 x 0.80" (9.6 x 5.0 x 2.1cm)
Without Batteries: 1.60 oz (45g)
With Batteries: 2.40 oz (68g)
Because the LS-57-072 Listen iDSP Advanced Level II Stationary RF System is designed for venues accommodating up to 100 people, it is an ideal solution for creating a high-quality listening environment. This comprehensive system includes the LT-800-072 72 MHz transmitter, broadcasting a robust and reliable RF signal, and four LR-5200-072 Advanced iDSP receivers, ensuring an unparalleled listening experience for your audience.
The LR-5200-072 receiver stands out in the market with 20 dB less hiss than other RF receivers, offering listeners superior audio performance and clarity. Each unit provides the option of multiple channels, making it a perfect choice for venues requiring language interpretation or alternate audio streams.
The system is powered by rechargeable Lithium-ion batteries, offering long life and significant cost savings over the unit's lifespan. These batteries can be fully recharged within 2.5 hours, ensuring minimal downtime.
The LS-57-072 Listen iDSP Advanced Level II Stationary RF System is not only high-performing but also adaptable and flexible. The included universal antenna and universal rack mounting kit allow for seamless integration into almost any permanent audio setup. The system also comes with universal ear speakers, neck loops/lanyards, a 4-port USB charger, and an assistive listening notification signage kit, ensuring your venue's compliance and meeting your customers' needs simultaneously.
This innovative RF wireless assistive listening system is designed for the hearing-impaired, capable of broadcasting on 57 channels and frequency agile. The RF receiver can receive on 57 wide and narrow band channels. The device features a programmable multi-function Listen button that can be tuned for the venue's desired channels and electronically lock out any unused channels.
The receiver boasts a signal-to-noise ratio of 80 dB or greater and an audio frequency response of 50 Hz - 15 kHz ( +/-3 dB). It employs unique DSP SQ noise reduction technology and a programmable squelch circuit. The unit also incorporates a multi-functional display that indicates battery status, inventory number, and channel.
The device can be worn with a lanyard or belt clip and features an integrated DSP driven neck loop that automatically senses and sends optimized audio signals directly to hearing aids and cochlear implants equipped with telecoils. The neck loop has a field strength of 400 mA/m (+/- 3dB) and frequency response of 100Hz to 5kHz (+/- 3 dB ref 1kHz).
The device also includes a USB connector for inventory control, setup, charging, and firmware upgrades. It incorporates automatic battery charging circuitry and uses a non-proprietary Lithium-ion battery. The device also has additional charging contacts to allow multiple charging options. The ALS system has 80 dB SNR or greater, end-to-end, making it a product of choice from Listen Technologies Corporation.