





See Options
2 Year
$179.99
3 Year
$249.99
5 Year
$489.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
20 Hz - 20 kHz (+/- 1 dB) Line Input63 Hz - 15 kHz (+/- 3 dB) System Specification (wireless end-to-end with LR-44)
> 70 dB (SNR) Line Input> 60 dB (SNR) System Specification (wireless end-to-end with LR-44)
Two (2) 3.5 mm (0.14 in.) Tip/Sleeve connector, -30 dBu nominal input, +14 dB headroom, impedance 4.4k Ohms, 5 VDC bias supply
< 0.1% (THD) Line Input< 2% (THD) System Specification (wireless end-to-end with LR-44)
Stereo/Mono Input. Two (2) Dual (RCA) Phono connectors, unbalanced, -10 dBu nominal input, +14 dB headroom, impedance 10k Ohms
Mono Input. Two (2) Phoenix Type connector, balanced, + 4 dBunominal input, +14 dB headroom, impedance 100k Ohms
Three (3) position switch - Power OFF, Power ON-Indicator Lights OFF, Power ON-Indicator Lights ON
Two (2), four (4) position rotary switches (2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz)
Two (2) audio taper rotary potentiometer, counter-clockwise decreases input mix level, clockwise increases input mix level
Green LED on in-line power supply indicates AC power is applied
Two (2) Green LEDs, two (2) Red LEDs, Green LED indicates Audio presence and Red LED indicates peaks in the audio
Solid Amber indicates carrier is present and IR is being transmitted
Solid Green indicates power is applied to unit, flashing indicates unit has entered power save mode
2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz, Selectable
Two (2) channels, Selectable carrier frequency
+/- .005% stability 0 to 50 Degree C
50 PPM
FM Wideband, +/-50kHz deviation max, 50 S pre-emphasis
Carrier will shut off when no audio is present for 15 minutes on both channels to preserve radiator life
Two (2) RJ-45 connectors - Provides RF Signal and Power, CAT-5e cable 24 AWG, 100 ft. maximum cable length, two (2) LA-141s per output connector
2,787 sq. m (30,000 sq. ft) single channel with LR-4200-IR/LR-5200-IR receivers or 697 sq. m (7,500 sq. ft) single channel with LR-42/LR-44 receivers
1.49 W
100-240 VAC, 50-60 Hz
12 VDC, 4 A, 48 W
2.5 mm ID barrel connector, center positive
Two (2) RJ-45 connectors. providing Power and RF signal for up to two (2) LA-141 expansion radiators on each output
In-line switching mode power supply, Listen part number LA-210
IEC line cord, North America Type B (LT-84-01), Asia and UK Type G (LT-84-02), Euro Type C (LT-84-03), Australia Type I (LT-84-04)
14 Degree F (-10 Degree C) to +104 Degree F (40 Degree C)
-4 Degree F (-20 Degree C) to +122 Degree F (50 Degree C)
0 to 95% relative humidity, non-condensing
FCC part 15, ICS-03, CE, UL, CUL, C-Tick, CCC, PSE, KC, GS, RoHS, WEEE
CUL, UL, CE, CCC, C-Tick, KC, PSE, GS, FCC, RoHS
Black with White Silk Screening
Can be mounted on a wall, ceiling, or table with provided hardware (screws and hollow wall anchors not provided). Optional LA-347 Wall Box Mounting Plate is available for mounting to a standard single gang electrical box.
LR-42, LR-44, LPT-A117, LA-141, LR-4200-IR, LR-5200-IR, LR-4200-IR-P1, LR-5200-IR-P1, LP-40-IR-01, LP-41-IR, LP-50-IR, LP-51-IR, LR-X200-IR
1.5 x 10.7 x 4.1" (3.81 x 27.2 x 10.5cm)
0.8 lb (0.4kg)
with Power Supply: 1.8 lb (0.8kg)
< 2% total harmonic distortion (THD) at 80% deviation
Two (2) 0.14" (3.5mm) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm, accepts mono or stereo phone plug or LA-430 Intelligent Ear Phone/Neck Loop Lanyard
63 Hz - 15 kHz ( +/-3 dB)
> 60 dB
Power on/off and volume up/down
Via software and USB port, Auto Seek, Jack Sense, Squelch, Auto Power, Auto Off, Stereo, Brightness, Channel Name
Press and hold up/down volume buttons for 5 seconds to enterchannel adjust, use up/down to select channel
OLED - Channel designation, battery level, unit number, charging status, volume status
Flashes when batteries are low or to indicate charging, solid when fully charged
2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz
Four (4) selectable channels
+/- .005% stability 32 to 122 Degree F (0 to 50 Degree C)
FM Wideband, +/-50 kHz deviation max, 50 uS de-emphasis
30,000 ft 2 (2787 m 2) single channel with LT-84/LA-141 or 40,000 ft 2 (3716 m 2) single channel with LT-82/LA-140
Programmable in 20 steps, automatic on loss of IR signal
Turns unit off after a specified time of no IR signal, default is 30 minutes
Better than one (1) nW/cm2 @40 dB SNR
Micro USB connector, 5 V, 500 mA
Lithium Ion
8 Hours of typical use
Fully charged in 2.5 Hours
14 to 104 Degree F (-10 to 40 Degree C)
-4 to 122 Degree F (-20 to 50 Degree C)
0 to 95% relative humidity, non-condensing
FCC Part 15, ICS-03, CE, RoHS, WEEE, ADA 706, CBC 11B-706
LA-140-GY, LT-82, LA-365, LA-401, LA-381, LA-405, LA-404, LA-403, LA-402, LA-380, LA-430, LT-84, LA-141, LA-382
Flat Black
Without Belt Clip: 3.75 x 2.0 x 0.64" (9.6 x 5.0 x 1.7cm)
With Belt Clip: 3.75 x 2.0 x 0.80" (9.6 x 5.0 x 2.1 cm)
Without Batteries: 1.9 oz (53.9g)
With Batteries: 2.8 oz (79.4g)
819267022935
Securely transmit assistive listening audio and ensure compliance for your venue with the LS-90-0 ListenIR iDSP Level I System. The pre-configured system includes everything you need to meet the needs of a small or mid-size venue up to 50 seats, including boardrooms, theaters, training venues, classrooms, and more.
Each LS-90-0 system comes complete with one of our LT-84 Transmitter/Radiator combos for clear and secure line-of-sight audio transmission, along with our LR-4200-IR receivers and LA-423 4-port charger.
Simple to set up and cost effective, the LS-90-0 from Listen Technologies offers better coverage than similar systems at an affordable price.
Architectural Specs
Furnish and install an IR wireless assistive listening system for use by the hearing-impaired. The assistive listening system (ALS) shall be capable of broadcasting up to two (2) audio channels with the choice of four (4) mono carrier frequencies; 2.3, 2.8, 3.3 and 3.8 MHz. The system coverage area shall be up to 30,000 ft 2 (2787 m 2) with single channel transmission. The system shall have a SNR of 60 dB or better and THD of less than 2%. The system shall have an audio frequency response of 63 Hz to 15 kHz, +/- 3db. The system shall have two (2) independent mixing audio inputs, one for each transmission channel.
Each mixing input shall consist of one (1) 3.5 mm Microphone input, one (1) balanced Phoenix type input and one (1) unbalanced RCA input. The system shall have independent channel audio processing with Limiting, Compression and Noise Gate as well as transmit level control and level indication via an LED. The system shall provide Power and RF signal for up to Four (4) Expansion Radiators over CAT-5 cable for additional coverage.
The system receivers shall be capable of receiving on four (4) wide band channels (carriers), Channel 1 (2.3 MHz), Channel 2 (2.8 MHz), Channel 3 (3.3 MHz) and Channel 4 (3.8 MHz). The receivers shall be tuned to a single channel and users shall not be able to change the channel. The receivers shall have the option of being lanyard or belt clip worn and the lanyard shall incorporate an integrated neck loop for compatibility with T-coil hearing aids.
The receivers shall be intelligent and provide customized audio to either earphones or the integrated neck loop based upon which is connected. The receivers shall have two (2) 3.5 mm (TRRS) connectors to drive the integrated neck loop lanyard or up to two (2) mono or stereo earphones. The receivers shall incorporate a multi-functional display (OLED) that indicates battery status, inventory number, volume level and a customizable channel name.
The receivers shall employ a unique iDSPTM noise reduction technology. The receivers shall be fully programmable via PC software. The receivers shall have a micro USB connector used for programming/setup, inventory control, charging and firmware upgrades. The receivers shall incorporate automatic battery charging circuitry and use a non-proprietary lithium ion battery. The receivers shall automatically turn on when removed from the charging device and automatically turn off when returned to the charging device.