
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
50 Hz - 15 kHz ( +/-3 dB)
SQ enabled: 80dB; SQ disabled 60dB
< 2% total harmonic distortion (THD) at 80% deviation
Unbalanced, tip of 3.5 mm connector, -45 dBu nominal input level, -30 dBu maximum, impedance 20k Ohms
Three position switch: high, middle, and low; 6db increments
5VDC Bias
Unbalanced, ring of 3.5mm connector, -10 dbu nominal input level, -3 dbu maximum, impedance 10K ohms
Power, mute, channel UP/DOWN, Mic sensitivity, NiMH/alkaline battery, SQ enable/disable
Channel Lock out,Channel lock
Channel Designation, lock status, signal strength indication, battery life, RF Power
Red, illuminated when unit is on. Flashes when batteries are low, or to indicate charging. Flashes when muted
72.025 - 75.950 MHz
17 wide band, 40 narrow band
+/- .005% stability 32 to 122 Degree (0 to 50 Degree C)
Microphone cable
50 PPM
From 0 to 150' (45.7m)
3.5 mm connector
Less than 10mW
6
I/P 120VAC; O/P 7.5VDC 250 mA; Drop in contact points for use with charging cases. Power supply not included (LA-208)
2.3mm OD by 0.7mm ID, barrel type connector 7.5 VDC, center positive < 250mA. Drop in contact points for use with Listen charging cases
Two AA batteries, alkaline or NiMH
15 hours alkaline (LA-361), 15 hours NiMH rechargeable (LA-362)
Fully automatic, 13 hours
RoHS, WEEE, UL, PSE, CE, CUL, TUV, CB compliant
14 Degree F (-10 Degree C) to +104 Degree F (40 Degree C)
-4 Degree F (-20 Degree C) to +122 Degree F (50 Degree C)
0 to 95% relative humidity, non-condensing
FCC Part 15, Industry Canada
Manually lockable, controls accessible through doors
Dark Gray with white silk screening
LR-100-072, LR-400-072, LR-500-072, LA-208, LA-277, LR-4200-072, LR-5200-072-P1, LR-5200-072, LR-4200-072-P1, LP-40-072-01, LP-41-072-01, LP-50-072-01, LP-51-072-01, LDS-5200-072, LDS-4200-072, LDS-4200-072-P0, LDS-4200-072-P1
3 x 5 x 1" (7.6 x 13 x 2.5cm)
3.9 oz (111g)
With Batteries: 5.8 oz (164g)
Designed for a variety of portable assistive listening applications, the LT-700 Portable Display RF Transmitter delivers the highest level of performance for all needs. Whether transmitting voice or music, the LT-700 offers a clear, reliable signal for use in environments without an installed assistive listening system.
Wireless audio is easily and clearly picked up by any of our Listen Portable receivers, allowing you to meet your needs easily and effectively. From outdoor events to classrooms, factory tours to training spaces and more, the LT-700 is the ideal portable transmitter for nearly any setting.
Architectural Specs
The portable RF display transmitter shall be capable of broadcasting on 57 channels. The unit shall incorporate a microphone sensitivity switch. The device shall broadcast on both wide and narrow band channels with a SNR of 80 dB or greater. The device shall have an audio frequency response of 50 Hz to 15 KHz, ' +/-3 dB at 72 MHz, or of 50 Hz to 10 kHz, ' +/-3 dB at 216 MHz. The device will incorporate a mute switch. The battery door shall be capable of being mechanically locked.
The device shall incorporate an LCD display that indicates channel, battery level, low battery, battery charging, and RF signal strength. The portable transmitter shall incorporate automatic battery charging circuitry for recharging of NiMH batteries, with the ability to charge via a wall transformer or drop in charging case. The Listen LT-700-072 or LT-700-216 is specified.