See Options
Need help? Ask our experts.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Black
Frequency Response (-10 dB): 32 Hz - 152 Hz
Frequency Response (-3 dB): 39 Hz - 100 Hz
Maximum SPL Peak: 123 dB
Low Frequency: 2x 8" (203mm) custom woofer
System Power Amplification:
Rated Power: 400W peak
Low Frequency Power Amplifier:
Rated Power: 400W peak
Rated THD: <1%
Cooling: Convection
Design: Class D
Input Type: 2x Female XLR - 1/4" balanced TRS combo jack and Bluetooth 5.4
Mic/Line Impedance: 600 Ohm Balanced
Output: 2x Male XLR Balanced
High Pass Mode: Full Range, High Pass
Output Mode: Stereo / Mono
Phase: Normal / Invert
Output Impedance: 1 - Ohm
Bluetooth Protocol: 5.4
Bluetooth Function: Audio streaming
Detachable line cord: 100-240V, 50-60 Hz, 75W
AC Connector: 3-pin IEC 250 VAC, 10 A male
Power Supply Type: Switchmode
Battery Life: Up to 12 hours (6 hours per battery)
Charge Time: 3 hours (Approx.)
Capacity: 8880 mAh
Nominal Voltage: 11.1V
Battery Compartments: Two (hot-swappable)
Operating Temperature Range: 14 to 113 Degree F (-10 to 45 Degree C)
Charging Temperature Range: 32 to 113 Degree F (0 to 45 Degree C)
Input Protection: Peak and RMS limiting, power supply and amplifier thermal protection
Display LEDs: Front LED, Bluetooth Status, Battery Status, Overload
Required, included
Lithium ion
Non-universal
1
22 x 9.8 x 21" (559 x 249 x 533mm)
Without Battery: 40 lbs (18.1kg)
With One Battery: 41.7 lbs (18.9kg)
810128262606
Mackie ThumpSub GO Battery-Powered Portable Subwoofer with Bluetooth
You might think your battery-powered PA system sounds good on its own. But deep down, you know it's missing a little more oomph. You want that chest-thumping low end that shakes the dance floor. Now, that's possible with the ThumpSub GO battery-powered portable subwoofer.
Up to 12 Hours Total Battery Life
ThumpSub GO combines two battery compartments for up to 12 hours of continuous bass thumping. Since the sub works perfectly with a single battery, it's also possible to charge a second battery elsewhere, then hot swap it out-without the unit powering down for even a moment!
Note: ThumpSub GO includes one GB-200 battery for up to 6 hours of battery life. Optional second battery sold separately.
Easy to Carry
Carry the bass like a briefcase with the built-in ergonomic handle, making ThumpSub GO the ultimate portable subwoofer for mobile DJs and performers.
Horizontal
ThumpSub GO works equally well vertically, making it easy to fit into narrow spaces where it won't get in the way. Subwoofers should be felt, not seen.
Effortless Integration with Your PA System
Connect Portable Loudspeakers
Connect portable loudspeakers for a complete mono, stereo or zone PA system, reinforced with deep, floor-shaking bass.
Note: Recommended for loudspeakers with up to a 10" woofer size.
Give Your Speakers Bluetooth
Connect to ThumpSub GO via Bluetooth to stream wirelessly through the whole system, including any connected loudspeakers, even if the speakers don't have Bluetooth!
Minimize Footprint with Pole Mount
Mount a speaker above ThumpSub GO with the SPM400 speaker pole (sold separately) for an all-in-one PA system with clear sound, powerful bass and a smaller footprint.
Phase Inversion Switch
Place ThumpSub GO and your speakers wherever is most convenient, and if you have any issues with phase cancellation, use the phase inversion switch.
High Pass and Full Range Modes
High Pass and Full Range modes change the balance between the subwoofer and connected loudspeakers. Try both modes and see which sounds ideal for the situation.
All of the Lights
Keep track of ThumpSub GO when the lights go down with useful LEDs for system power, overload, and one for each battery. You'll know the status in a glance.
Optimized for Thump GO
ThumpSub GO is optimized to work seamlessly with the Thump GO battery-powered loudspeaker. It's also great for adding low-frequency extension to the Mackie ShowBox all-in-one performance rig, or any portable powered loudspeaker from any brand.
https://mackie.com/intl/warranty
866-858-5832