Magewell One Channel USB 3.0 to SDI Video Capture Dongle

Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (Ubuntu 12.04-16.10, CentOS 7)
OS X 10.9-10.11
macOS 10.12
Chrome OS

Windows:
DirectShow
Wave API/DirectSound/WASAPI

Linux:
V4L2
ALSA

OS X/macOS:
QuickTime
AV Foundation

VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow, V4L2, QuickTime,AV Foundation based encoding or streaming software

BNC: SD/HD/3G SDI
3.5mm audio jack: Unbalanced Line In interface

USB 3.0:
compatible with USB 2.0
compatible with USB 3.1 Gen 1

3.5mm audio jack: Unbalanced Line Out interface

BNC: SDI loop-through interface

Support for up to 2048x1080 input resolution

Integrated cable equalizer supporting cable lengths up to 140M for 3G-SDI signals
Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
Support for 2K (2048x1080) mode
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for 10/12-bit color depth
Support for extraction of SMPTE 352 payload identifier
Support for up to 2 (mono) audio channels at 48KHz

Support for extraction of audio formation information & channel status data
Limited support of 3Gb-DS: only the first stream can be captured
Limited support for capture of the first link of dual link interfaces:
YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
YCbCr 4:4:4 10-bit: captured as 4:2:2
RGB 4:4:4: R/B sub-sampled

Extract the embedded SDI audio and output via 3.5mm unbalanced Line out
Capture analog audio via 3.5 mm unbalanced Line In interface

Support for capture resolutions up to 2048x1080
Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USBbandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows) - 1920x1080 YUY2 (up to 70fps) and 1920x1080 RGB24 (up to 60fps)
Support for YUY2 & UYVY4:2:2 8-bit
Support for RGB24 & RGB32 4:4:4 8-bit

The default capture format is YUY2. More capture format can be set using USB Capture Utility

Video processing pipelines with 160 Mpixels/s processing bandwidth
Video cropping
Video scaling
Video frame rate conversion
Vertical flip and mirror

Video aspect ratio conversion:
Auto or manual selection of input aspect ratio
Auto or manual selection of capture aspect ratio
Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)

Video de-interlacing:
Weave
Blend top & bottom field
Top field only
Bottom field only

Video color format conversion:
Auto or manual selection of input color format & quantization range
Auto or manual selection of capture color format, quantization range & saturation range
Support for RGB, YCbCr 601, YCbCr 709 color formats
Support for Limited or Full quantization range
Support for Limited, Full & 'Extended gamut' saturation range

Support for connecting multiple USB devices to one system
Support for setting the device serial number as the device name shown in the system using USB Capture Utility

The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.

Multiple devices in one system can be upgraded simultaneously

Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

5V max current: Approx. 0.5 A
max power consumption Approx. 2.5 W

0 to 50 deg. C (32 to 122 deg. F)

-20 to 70 deg. C (-4 to 158 deg. F)

5% to 90% non-condensing

110.7 x 56.8 x 17mm (4.36 x 2.24 x 0.67")

0814395020877