Photography Lighting Power & Cables
Save 5% Every Day† with the Adorama Edge Card. Learn More
Aputure Aputure 2-Bay Battery Power Station (A-Mount)
- Reliable Aputure power for Nova P300c LED lights.
- Stable DC power supply up to 480W output.
- Compact size, ideal for on-location lighting setups.
- Supports A-Mount batteries for continuous power.
- Ensures overload protection for safe operation.
Special Order
Hosa Technology DMX512 4-Conductor Cable, XLR5M to XLR5F, 10'
- DMX512 Cable: 10-foot length for flexible setup.
- XLR5M to XLR5F connectors ensure broad compatibility.
- Durable PVC jacket protects the DMX cable.
- 24 AWG oxygen-free copper (OFC) for signal clarity.
- 120-ohm impedance guarantees reliable data transfer.
LiteGear V2 Double V-Mount Power Station
- Dual V-Mount power station; reliable power source.
- Provides stable 24V DC output for lighting gear.
- Supports LiteGear fixtures: LM1, LM2, LM3, & more.
- Compact power solution for on-location shoots.
- Ensures consistent power with overload protection.
Special Order
ARRI 12/18 K High Speed AutoScan Electronic Ballast
- ARRI Ballast: 12/18 K High Speed AutoScan.
- Electronic Ballast: For 12,000W or 18,000W lamps.
- Lighting Compatibility: Daylight & ARRIMAX heads.
- High-Speed Modes: AutoScan frequency control.
- Power Factor: cos 0.98 with Active Line Filter.
Ships from Manufacturer
Nanlite CB-DMX-3.5C-1/2 DMX Adapter Cable with 3.5mm Connector
- DMX Adapter Cable: Reliable & secure connection.
- 3.5mm Connector: Ensures broad device compatibility.
- 5-Pin XLR Connectors: Male & female ends included.
- Durable Cable: Built for long-lasting performance.
- 11-Inch Length: Ideal for compact studio setups.
Frezzi ELBC Bypass Connector DC Power Adapter for EyLight
- Bypass Connector ensures stable DC power supply.
- Reliable Frezzi adapter for EyLight compatibility.
- Compact DC adapter: 2x2x2.5"; lightweight design.
- Provides stable power; overload protection built-in.
- Durable power adapter from a trusted, reliable brand.
Ships from Manufacturer
Broncolor 16' Extension Cable for Flash Heads up to 3200 J
- 16' Broncolor extension cable for flash heads.
- Ensures reliable power delivery up to 3200 J.
- Durable cable construction for long-term use.
- Compatible with Broncolor powerpack strobes.
- Extends lighting reach for studio photography.
Ships from Manufacturer
LiteGear G2 Double Gold Mount Power Station
- LiteGear: Reliable power for your lighting setup.
- Gold Mount: Holds two batteries for extended shoots.
- 24V DC Power: Stable voltage output on PL4 connector.
- Broad Compatibility: Works with LiteMat series lights.
- Overload Protection: Ensures safe, reliable operation.
Special Order
K 5600 Lighting EB425 Electronic Ballast for Alpha 4K HMI Light
- 4000W Electronic Ballast: High power output.
- Silent Mode: Variable frequency for precise control.
- Universal Voltage: 95-265 VAC for global use.
- DMX Control: Integrated for remote operation.
- Reliable Ballast: Ensures consistent performance.
Ships from Manufacturer
K 5600 25' Head Extension Cable for Joker 200, 400 & 800 Watt HMI Lights
- 25' Extension Cable for Joker HMI Lights
- Ensures Reliable Power Output for HMI Lighting
- Durable Cable Design for Long-Term Performance
- Compatible with Joker 200, 400 & 800 Watt
- Extends HMI Light Reach with Ease & Safety
K 5600 Lighting 6K/9K Ballast for Alpha 9K HMI Lamp Head
- Ensures stable power for consistent lighting output.
- Offers reliable ignition for K 5600 HMI lamp heads.
- Durable ballast build guarantees long-term performance.
- Provides consistent output at multiple frequencies.
- Fast recycling minimizes downtime during shoots.
Ships from Manufacturer
K 5600 Lighting Battery Belt, 10A / 30V
- K 5600 Battery Belt: Reliable power solution.
- 10A/30V DC Power Supply: Stable voltage output.
- Compact size: Portable power for studio lighting.
- Overload protection ensures safe, reliable use.
- Durable battery belt for K 5600 lighting.
Ships from Manufacturer
Flashpoint VC26T Multi Battery Charger for the VB-26 V1 / Zoom Li-on Battery
- Rapid Flashpoint Charger: Minimizes downtime.
- Multi Battery Charger: Charges three batteries.
- Compact Charger Design: Portable, lightweight build.
- Durable Lighting Charger: Ensures long-term use.
- Safe Charging Features: Protects battery lifespan.
Hosa Technology DMX512 4-Conductor Cable, XLR5M to XLR5F, 50'
- Durable DMX Cable: Reliable signal transmission.
- 50-Foot XLR Cable: Ideal length for stage lighting.
- XLR5M to XLR5F: Ensures secure, balanced connection.
- 24 AWG OFC Conductors: Provides clear signal quality.
- 120-Ohm Impedance: Minimizes signal reflections.
Dedolight 11-18V DC Power Supply with Anton Bauer D-Tap for DLED9-D/T Heads
- Stable voltage ensures consistent lighting output.
- High current capacity for demanding DLED9 lights.
- Low noise DC power supply for clean audio capture.
- Overload protection enhances equipment safety.
- Compact size allows for easy studio integration.
Ships from Manufacturer
K 5600 Lighting Compact AC Power Supply for Joker 200 & Alpha 200
- K 5600 ballast: Reliable power for Joker 200.
- Ensures optimal color accuracy with stable output.
- Durable AC power supply: Long-term lighting solution.
- Compact design: Easy to transport & setup ballast.
- Multi-voltage ballast: 110/240 VAC, 50/60 Hz power.
Ships from Manufacturer
Flashpoint UC46 Multi Battery Charger for the XPLOR 600, 600Pro and 400 Pro
- Rapid Flashpoint charger: XPLOR 600/Pro/400 Pro.
- Multi battery charger: Simultaneously charge batteries.
- USB-C cable & DC adapter compatibility
- Compact, portable design: Perfect for on-location shoots.
- Durable build ensures long-lasting charger performance.
Godox Connect Cable for KNOWLED F600BI Panel (16.4')
- 16.4' Godox cable ensures reliable power output.
- Durable cable design for long-lasting performance.
- Connect F600BI panel with ease using this cable.
- Proprietary connectors ensure secure compatibility.
- Extended length cable offers flexible placement.
Dedolight 200W Electronic Flicker Free Ballast
- Dedolight Ballast: Reliable power, consistent output.
- Flicker-free ballast ensures color accuracy.
- 90-260V AC input voltage for easy setup.
- Durable build ensures long-term performance.
- 200W electronic ballast with full/half power.
Ships from Manufacturer
K 5600 Slimverter 400 for the Joker 400, Converts 30 Volt DC to 115 Volt AC.
- Stable voltage DC power supply ensures performance.
- 400W Slimverter: Reliable power for Joker 400 lights.
- Compact DC to AC converter; lightweight at only 3 lbs.
- Low noise power supply for optimal sound recording.
- Overload protection ensures safe, reliable operation.
Ships from Manufacturer
Aputure B7C 8 Light Charging Case
- Rapid B7C Charger: Quickly power eight Aputure bulbs.
- Multi-Port Charger: Simultaneously charge all B7C lights.
- Compact Lighting Charger: Streamline your studio setup.
- LED Indicator: Monitor charging status efficiently.
- Safe Charging: Built-in safety features ensure protection.
Blizzard Lighting 10' IP Rated 5-Pin XLR Male to XLR Female DMX Cool Cable
- Durable IP Rated DMX Cable: 10' length.
- Robust 5-Pin XLR Male/Female connections.
- Optimal signal for reliable DMX connectivity.
- Built with Oxygen-Free Copper (OFC).
- Enhanced durability for professional stage use.
Temporarily On Backorder
K 5600 Lighting 1200W LED Ballast with Multi-Output
- 1200W LED Ballast: High power output, reliable.
- Multi-Output Ballast: Ensures consistent lighting.
- Wireless DMX Support: Streamline studio workflow.
- LCD Display: Precise dimming control (1-100%).
- Durable LED Ballast: Backed by 1-year warranty.
Ships from Manufacturer
Litepanels Sola ENG 18V DC Power Supply
- Litepanels 18V DC power supply ensures stability.
- Reliable power for Sola ENG LED lights on location.
- Compact DC power supply offers overload protection.
- Provides stable current capacity for ENG equipment.
- Low noise DC power supply for critical audio needs.
Ships from Manufacturer





















