
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
2017-12-12T19:00:00
Most pictures show the dual arm on a wall forward facing the desk. I was concerned if this would work since my mounting wall was on the side of my desk. It worked perfect!! On one arm I did not attach the smaller section. It's extremely sturdy and very adjustable.
Aaron B.

2016-07-29T20:00:00
Wall mounted my 2 27in Asus Monitors with this system. Works well, was very easy to install. Mounted to a stud in the wall for best results. My only problem is how close the monitors had to be pulled out to be side by side. Had to remove the 2nd arms to achieve this look. When I had all the arm extenders on the 2 monitors would not touch side to side.
Apophissdfamily

2016-04-24T20:00:00
Rating 4 out of 5 simply because I haven't had this very long and in the middle of remodeling office, so it is not set up. However, I have examined it closely and it appears to be of very good quality. I am thrilled about all of the options for how you can position the monitors. So far, so good!
Yodelayheewhosdfamily

2015-11-18T19:00:00
Great!
S J.

2015-08-12T20:00:00
Excellent quality. I agree with other reviewers that the provided mount screws are entirely insufficient for the job, but that is my only complaint. Operationally, it works exactly as it should and is, in fact, more stable than I thought it would be. The quick release at all joints is incredibly helpful and a nice touch.Now the one downside, which is entirely my fault as I simply did not consider it when I ordered the mount. The unit uses a single wall mount, with two fixed (the pivot left/right, but not up/down) followed by two spring tension arms that do adjust up/down. If you want to mount flat against the wall then the closest center to center measurement you can get is over 30". In my case I have a 27" monitor on one side and a 21" on the other and with the lower arms against the wall, the upper arms in their full upright position and the monitors tilted inwards slightly, the gap between the monitors is over 6" The only way to get them closer together would be to swing the lower arms inward, but that gets them to close to me. Again, this is NOT a problem of the mount. It works exactly as it should. It's a problem with my ability to fully understand how it would work once I had my monitors attached. Overall, I am getting used to the gap (it's also an excuse to get another 27" monitor :) ) but am otherwise extremely happy with the mount.As an aside, given the release mount joints are all the same I'm thinking if I could get two more 'spring tension' arms to use as lower arms then I could raise them and bring the monitors together. It's a shame, given the product ships in separate boxes for each piece, that this isn't an order option.
Franciscosdfamily

2015-04-24T20:00:00
Is is nice and sterdy!!!
george r.

2015-03-01T19:00:00
An incredible unit once assembled, but upon arrival it looked like a jigsaw puzzle, each arm/piece individually boxed, making me wonder if I got the wrong order. Once each box was opened the process to assemble could not have been more intuitive and proved itself to be a really well engineered modular system (even if I did not trust the screws and provided my own to hang it on the wall). Imagine I could pick up the individual piece if I ever wanted to convert and clamp it to a desk top. Performs as expected, hanging two 24" monitors; tensioning system works like a charm. Cables are securely managed by the arms for clean appearance. Not as flat against the wall with monitors as I would like, but not sure the perfect solution exists. This came lot closer than I would have thought. Again, don't freak out when the package arrives with seven individual boxes; engineered modular system does a great job.
Motorcycoholicsdfamily

2015-02-10T19:00:00
This product does as advertised, but a word of warning. This product cannot be anchored in sheet rock alone and be expected to support the weight of the mount plus two monitors. The mount must be secured with large screws to a stud within the wall. The sheet rock anchors that shipped with the mount are ridiculous. I installed anchors 3 times the size in sheet rock only and the weight was still too great for the small two hole footprint of the mount. Other than the mounting problems, the quality of the mount itself is outstanding.
Adam T.

2015-01-10T19:00:00
Work well, be forewarned these things are heavy and once you add monitors to it you can be looking at an extremely heavy set up. I have used 4 of these in my facility and love them.There is a problem with the monitors being too far apart if you sit kinda close to them but if your remove the first joint they work really well.
McIntoshsdfamily

2014-11-30T19:00:00
This worked perfect for my two Dell 23" monitors.
Paul M.

2014-09-11T20:00:00
This arm was perfect. I put (2) 19" monitors on it. Very easy to install. The torsion was perfect. What I like about this product was the easy clips that were used to put the arms on. This whole product is 5 stars in my book. Will buy this product again. Thanks for making a solid product.
T C.

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Silver
180 degree
Yes
+90/-45 degree
27.1" (68.8cm)
2
75 x 75mm, 100 x 100mm
Aluminum, Steel
Taiwan
Wall Bracket (Single Stud)
Per Arm: 19.8 lb (8.98kg)
00617401053193
Worked Perfect on a side wall to my desk!
By Aaron B.
Most pictures show the dual arm on a wall forward facing the desk. I was concerned if this would work since my mounting wall was on the side of my desk. It worked perfect!! On one arm I did not attach the smaller section. It's extremely sturdy and very adjustable.
Five Stars
By S J.
Great!
Dual arm MI-45114 allows you to mount two flat screen computer monitors side-by-side on your wall. Save space on your desktop and elevate the position of your monitors to an ergonomic height. This wall mount is universally compatible with computer monitors with VESA standard bolt holes of VESA 75 and VESA 100.
Premium spring arm mechanism in each arm allows independent height adjustment of each monitor. The tension on the spring arm is adjustable to suit various monitor weight ranges. Raise or lower your monitors with the touch of a finger. Mount-It! monitor wall mount is made from highest grade aluminum alloys. Quick connect mechanisms at each joint makes it incredibly easy to install.
The wall connection plate is durable yet small to allow flexible installation on any wall stud. Cable management feature hides unsightly cables for a neat installation. Each joint swivels at least 180 degrees and some 360 degrees for optimal positioning of the monitors. MI-45114 has 360 degree rotating monitor heads that allow the monitors to be rotated between landscape and portrait modes of installation. Monitors can change the installation mode without having to remove them from the wall mount.