Mount-It! Articulating Dual Monitor Desk Stand

2024-01-01T19:00:00

The fit for my two 32" curved monitors is a little tight, but it works. Sturdy construction. I ended up installing it in my desk vs. using the base, because I thought it may tip over, but smaller monitors may not have that issue.

Monica

Originally posted at

2023-12-03T19:00:00

Sturdy, stable, fully articulating, easy to assemble and aesthetically appealing.

Neil

Originally posted at

2023-12-02T19:00:00

Sturdy, stable, fully articulating, easy to assemble and aesthetically appealing.

Neil

Originally posted at

2023-10-03T20:00:00

Stand works great with no issues. Solid quality. Would recommend and purchase again.

MiramarGuy

Originally posted at

2023-10-02T20:00:00

Stand works great with no issues. Solid quality. Would recommend and purchase again.

MiramarGuy

Originally posted at

2023-09-13T20:00:00

Worked out great for what I was looking for. Gives me more work space on my desk.

Brandon

Originally posted at

2021-12-07T19:00:00

impossible to have the tops of the monitors level, one always higher than the other. Had to rig a fix.

GTJWR

Originally posted at

2021-09-02T20:00:00

It?s adjustable, but is definitely not EASILY adjustable. to raise or lower the monitor requires an allen wrench (no big deal but that means you need two hands to get jerk the monitor up or down to the correct height. Problem is, there?s no way to fine tune this; if you don?t loosen the bolt enough, it won?t budge, but loosen it too much, and it plummets to the bottom. Further complicating this, the base of the stand is so lightweight, that the whole thing moves when you try to raise the monitor just an inch or two. But, it was <$40, so if you anticipate needing to regularly adjust the height, spend the extra $. Otherwise, get a friend to help you get things set up, then use the money you saved to buy that friend some beer and pizza as a thank you.

Paulio I.

Originally posted at

2021-09-01T20:00:00

These monitor stands are terrific! Solidly built and easy to put together. We've outfitted our entire call center with them. I've only gone up to a 24" monitor, but with two that size it remains sturdy and balanced.

G D.

Originally posted at

2021-07-05T20:00:00

I bought this for a 24 inch flat screen tv. It works perfectly! I couldn?t ask for a better product.

LJ

Originally posted at

2021-05-20T20:00:00

This has been a complete nightmare. Misplaced parts, difficult to set up. It's just a bad design. Once I opened the package, I was thoroughly disappointed by how it assembles - just so stupid.

senior

Originally posted at

2021-05-20T20:00:00

This is just a piece of junk. Everything about the design is stupid. And then it doesn't work. Have to tighten these so much for it to hold, that there is no tilt available.

jack

Originally posted at

2021-04-12T20:00:00

I bought 3 of these stand and they are good stands at a good price. I will buy more when i need to.

dmcc708

Originally posted at

2021-04-08T20:00:00

Bought the MI-2781 stand for dual 24 inch monitors. The vesa mount wobbles on the arm and this makes adjusting the monitor difficult. The bracket on the back of vesa mount that slides over the mounting arm is to wide allowing the monitor to wobble. Other than that the stand was easy to assemble.

Novabb

Originally posted at

2019-10-30T20:00:00

Love how adjustable it is, particularly the height. Very sturdy, just sitting on the desktop. I struggled a little with the first joint (next to the post) on both sides. Was very tight and a bit hard to adjust. Other than that, an outstanding product! Actually improved my productivity!

Em

Originally posted at

2018-07-13T20:00:00

I had 1 mounted monitor and two on stands, but limited desk space. This was an excellent solution. Very happy!

Casey D.

Originally posted at

2018-07-11T20:00:00

Exactly what I needed, very good quality build parts, it let's you adjust the screens with many angle approaches, it even has a height adjustment for every screen mount so if your screens have a height difference due to a bigger frame or mount point you can adjust them all still to be the same height ( gives you an inch +/- of margin to play with) - not that common on these products.Note that if you plan not to attach the center pole to the table and simply place it as is with the base plate, you will limit yourself to the angle of how much you can turn the side monitors curved to your direction since the center-weight-point will be moved further then the base playe and it will fall forward. In my pictures you can see the maximum angle to curve without mounting the pole to the table.

Pavelsdfamily

Originally posted at

2018-07-11T20:00:00

I have 3 27” wide screens. They didn’t fit. Felt well built

smsdfamily

Originally posted at

2018-07-11T20:00:00

No issues. Solid mount.

Rednightssdfamily

Originally posted at

2018-07-10T20:00:00

These are very effective and a good value. Easy to assemble and came with a good selection of alternate mountings and screws for a variety of monitors and their backings. Took away one star because the joints were seriously hard to tighten or loosen in some spots. That said, once I was able to position in a way I liked, they look and work great.

Matt H.

Originally posted at

2018-07-08T20:00:00

Overall the build quality is ok. The plastic cable management loops broke almost immediately, not a big deal. The hex joints on the arms don't stay completely stationary when tightened down fully, also not a huge deal.If you're planning on mounting straight to a desk so that you don't have to use the bulky stand, this isn't your stand. The weight of the monitors causes the stand to lean forward quite a bit and it can't be screwed any tighter without damaging the wood desk it's mounted to.Also it was nice of them to include the thumbscrews for mounting the monitors but I wouldn't trust the plastic on them of you have expensive monitors.

Natesdfamily

Originally posted at

2018-07-07T20:00:00

Great price and outstanding quality.

ebitdasdfamily

Originally posted at

2018-07-05T20:00:00

Worked on my 34" LG ultrawide. Just tighten the heck out of things.

Amazon C.

Originally posted at

2018-07-03T20:00:00

It was a pretty basic install on the mount part, switching to a real wood tabletop so might switch to the one that goes into the desk. The only problem I had was getting the monitors alligned

Customersdfamily

Originally posted at

2018-07-03T20:00:00

Great monitor mounts, very adjustable and versatile, stable and look great!

Rik C.

Originally posted at

2018-07-01T20:00:00

This is a repeat buy. I have one at the office at work, and one in my office at home. I also have purchased one that is single swing arm for the detached office at home. This one has cable routing, holds 2 27" monitors with no sweat. If you are in the market for one of these, it works great.

Oompah L.

Originally posted at

2018-06-30T20:00:00

Works perfectly! got around to setting up a triple monitor computer set up and needed a stand. For three monitors it will likely need to be secured by a hole in the desk but that was to be expected. The middle monitor can be a little wonky to place right but won't move one you have it in the right place.

Nathan G.

Originally posted at

2018-06-30T20:00:00

This is so great that. I wish that I had bough the one for the four monitor's instead but this is what I use at work two and three. Again I bought this one for my self to use home. Great to sit and stand to allow circulation.

Noelsdfamily

Originally posted at

2018-06-26T20:00:00

This mount i don't like that much, cuz monitors don't align properly and they hit each other if u try to angle them towards you...

hector a.

Originally posted at

2018-06-26T20:00:00

This is indeed a heavy duty unit but depending on the weight of the monitor and the distance from the mid point it can start to tip over with the slightest imbalance. This would be much better if the base legs were longer for better security.

David T.

Originally posted at