


See Options
1 Year
$31.99
2 Year
$69.99
3 Year
$94.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
2CH analog audio distribution over multiple zones via an IP network
2CH audio source equipment, microphone systems, speakers, PA systems
20Hz to 20KHz
2 line x 20 character backlit LCD display (on TX)
Local control via front push/turn knob and LCD display, remote control via web interface and 500811 controller (on TX)
Two (2) 2CH analog audio in
One (1) Mic in
One (1) SPDIF Out (2CH digital audio)
Two (2) RCA receptacle for Analog Audio In (on TX)
One (1) 3.5mm jack for Analog Audio In (on TX)
One (1) 3-pin phoenix connector for Mic In (on TX)
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair (TX)
One (1) 3.5mm jack for IR Emitter or IR Sensor (TX)
One (1) DB9 Serial Ports for RS232 (TX)
One (1) 8-position DIP Switches for device ID addressing and config (TX)
One (1) 4 pin phoenix connector speaker terminals (2x50W into 8Ohm)
One (1) 2.1mm locking power connector (TX)
One (1) Cat 5e/6 or better twisted pair cables required
Cat5e/6: 330' (100m)
IR: 38KHz to 56KHz
RJ45 Link:
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Transmitter: Supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately
IEEE 802.3af
3W
Operating: 32 to 104 Degree F (0 Degree to 40 Degree C)
Storage: -4 to 185 Degree F (-20 Degree to 85 Degree C)
Humidity: Up to 90% non-condensing
Regulatory: FCC, CE, RoHS
Flammability: 94V0
4.33 x 4.76 x 1.97" (11 x 12.1 x 5cm)
1.20 lbs (544.3g)
The Audio / AMP over IP Extender Transmitter with Mic is allowing a one Mic-in signals to be extended over an IP network, and up to 330ft (100m) from an Ethernet Switch via Cat5e/6 cable in a point-to-point configuration. Point-tomultipoint and multipoint-to-multipoint is supported by connecting several Transmitters and Receivers to the same local Ethernet network. Depending on the application one or more Transmitters (500755-AMP-TX) can communicate with (or multicast to) multiple Receivers (500755-AMP-RX).The Transmitter supports PoE (PD) if used with a PoE (PSE) Ethernet Switch. Supports bidirectional RS232 and directional IR transmission initiated via an IP network or via passthrough for remote control of end devices.
Applications:
2CH analog audio distribution over an IP network
Commercial and residential AV systems
Classroom projector systems
Digital signage
Boardroom systems
Collaborative PC systems
Medical information systems
877-689-5228