



See Options
2 Year
$174.99
3 Year
$224.99
4 Year
$299.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
MVII-DVI-Tx transmitter
CE, FCC Class A, IC Class / Class A, UL listed I.T.E Device, RoHS
CAT 5, 5e, 6 or 6a. F/UTP type cable is recommended
Regular or low-skew type is acceptable
Refresh Rate Established timings: 640x480 at 60Hz 800x600 at 60Hz 1024x768 at 60Hz
1280x1024 at 60Hz 1360x768 at 60Hz 1600x1200 at 60Hz
1680x1050 at 60Hz 1920x1080 at 60Hz 1920x1200 at 60Hz
Detailed timings: 1920x1080 at 60Hz
720x480p at (59.94,60Hz) at 4:3 720x576p at 50Hz at 4:3
1280x720p at 50Hz at 16:9 1280x720p at (59.94,60Hz) at 16:9
1920x1080p at 50Hz at 16:9 1920x1080p at (59.94,60Hz) at 16:9
Specific timings 1280x720 at 60Hz 720x480 at 59.94Hz 1920x1200 at 59.94Hz
Standard DVI-D interface specifications apply. DDC/EDID is supported
L+R summed audio input: 47K Ohms input impedance. A source device with 600 Ohms maximum output impedance is recommended.(analog audio input mode).
75 Ohms input impedance (S/PDIF input mode)
Stereo L/R audio input: 10K Ohms input impedance. A source device with 600 Ohms maximum output impedance is recommended
4.75K Ohms input impedance
Standard DVI interface specifications apply (at local video-output port). DDC/EDID is supported
Standard (A) version: Left+Right summed audio
VESA and CEA video formats, output on a digital DVI-D connector
Supported video formats include 1080p/60/24
(-A) mode: Line-level, summed L+R, analog audio.
(S/PDIF) mode: Supports copper S/PDIF digital-audio.
The DVI-Tx (transmitter) can also de-embed 2CH-PCM digital audio, which is presented as a S/PDIF digital audio stream at the DVI-Rx receiver
(S) mode
Protocol: Asynchronous, transparent to data format, transparent to data rates up to 115kbps, simplex
1x 4 pin phoenix
2x RJ-45 (1 input, 1 active loopthrough)
1x DVI-D (F)
1x DC Power jack
Supports the EDID/DDC connections on the DVI-I connectors
It is usually possible to connect to HDMI devices (via a plug-adapter or cable-adapter)
Embedded HDMI audio is not supported
32 to 104 deg. F / 0 to 40 deg. C
-4 to 140 deg. F / -20 to 60 deg. C
10 to 80% RH non-condensing
Input voltage: +5VDC at 1.2A max.
Consumption: 6W maximum
1.2 x 5.5 x 3.6" / 3.05 x 13.97 x 9.14cm
1lbs / 0.45kg
The MVII-DVI-RX is a video receiver that is compatible with the MVII-DVI-TX transmitter and Mondo Matrix. It extends a high resolution video signal over standard CAT5 cable (or CAT5e, CAT6 or CAT6a). There are user-configurable settings for video, audio and serial options which can be controlled from the front panel.
The MVII-DVI-RX features automatically adjusted EQ and Skew compensation, greatly simplifying the initial installation and setup. These adjustments can also be fine-tuned manually. The skew compensation can be varied in 2 ns increments to 65 ns total per color-channel to cancel the effects of skew in Category cables. This feature allows you to use a variety of UTP cables (both "normal" and "minimized-skew" types) to lengths up to 1000ft (305m).