Mitakon Zhongyi M42 Mount Lens to Fuji X-Mount Camera Turbo Mark II Adapter

2021-01-27T07:23:24

Works well...very satisfied

JOHN N.

2020-06-03T08:26:46

Very solid, performs well, no complaints but make sure that your legacy lens will fit; my Super Takumar 50mm 1.4 did not.

Erik M.

2019-06-27T14:10:49

I have several vintage M42 SLR lenses that I wanted to use on my Fujifilm X-T1 at their native focal length rather than 1.5X. The Turbo II is reasonably priced so I tried it. After several hundred images using Zeiss Jena Flektogon 35/2.4, I am very pleased. The optical quality is excellent, the character of this old lens is readily seen. I have compared images with this same lens on both a Turbo II vs. a Metabones. No significant differences that I have seen, other than an extra $150+ that is in my wallet vs. that of my Metabones-owning friend. The M42 to Fuji-X Turbo II is highly recommended.

RICK H.

2019-05-23T08:36:23

I bought this to use M42 mount vintage lenses on my Fuji XT3. This works great. I can achieve infinity focus on most of my M42 mount lenses. Only one wide angle doesn't quite reach infinity because the rear element extends too far back, so check the distance of the rear element at infinity before using. I don't see any loss in image quality as compared to using the same lens with a regular adapter, at least in real world terms. I'm not a pixel peeper. I highly recommend this if you are adapting vintage lenses.

Douglas T.

2017-03-10T09:39:39

it delivers the basic you need if you want to put in work your old M42 lenses: you get the original angle of FF view, one more Fstop, but it loses image quality: sharpness is not the same, and colors change a little bit too, not sure why, maybe to many glasses between the image and the sensor.

MARCELO L.

2017-02-28T17:19:10

it works as advertised. Images look good, At naked eye I cant really see degradation of image caused by the adapter glass. Probably with more scientific method will find it. Be careful, not all lenses will attach correctly, not sure if it is a flaw in the design of this adapter, or simply it is not possible to make all fit. I have 8 lenses with M42 mount, 7 OK, but one didnt work well (Pentax-Takumar 50mm f/1.4) aperture ring became stiff, and then I realized the protruding glass of the lens was pushing the glass of the adapter. Thankfully I didnt scratch any of the glasses.

Marcelo L.

2017-01-29T08:19:59

Works great on my fuji xpro 2. Also gives an hour extra stop of light ??.

John D.

2016-04-27T08:05:24

Quite simply, it does what it claims: makes your old M42 manual 35mm film lenses operate on an APS-C as if the sensor were full frame. Also adds an extra stop to whatever lens is being used. Shot with it on two jobs yesterday. No noticeable degradation in image quality in the shots. Fairly great, plus affordable.

Nick235 B.