


This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Two-port (VG-RX2)
Provided by the CORE module. However, power consumption of this module alone is approximately 0.5 watts
Video output formats:
Maximum resolution supported = 1080p or 1920x1200
Maximum color-depth = 24 bits per pixel (8 bits per color)
Maximum refresh rate = 60Hz at 1920x1200
This module automatically provides embedded HDMI-audio (if audio is available at the source AND if the EDID in the sink or display device supports it)
(1) HDMI-output, (1) CORE docking connector
This module supports the EDID/DDC connections on the HDMI connector
Version 1.3b
Version 1.1. Classification: HDCP Repeater Device
The HDMI "CEC" interface protocol is not currently supported
32 to 104deg.F (0 to 40deg.C)
-4 to +140deg.F (-20 to +60deg.C)
80% RH, non-condensing
Steel (0.040"/1mm thick)
Powder-coat black paint, white epoxy graphics
1.75 x 5.5 x 5.25" / 4.44 x 13.97 x 13.33cm
1.40 lbs (0.63 kg)
The Magenta Research VG-RX2-MM-HDMI 2-Port HDMI Receiver with HDCP accepts video from any Voyager transmitter (HDMI, DVI, VGA or component). The receiver supports HDCP-protected video and is rated for 1920 x 1200 uncompressed video signals, to distances of 6,600' over multimode fiber. One multimode fiber-optic module is included with each unit. Up to 10 (or more, depending on distance and the specific type of fiber being used) Voyager receivers can ultimately be daisy-chained together. When using an HDMI source, embedded HDMI audio is also sent through the Voyager transmitter to the receiver and outputted to a display via a HDMI connector. A power supply is also included.