MYT Works Rosette Leg 7" Adapters for Galaxy and Glide Systems, 4 Pack

Spring-Loaded Wheel Module
Traditional skateboard dollies use wheels that merely rest upon the rails. Their MYT Skater Dollies' unique spring-loaded wheel modules grip the rails. This provides the smoothest motion possible adjusting for any inconsistencies in the rails all the while keeping your camera setup secure. Further, they include a brake SRP Locking Bolt with every set of modules to prevent run-away situations and keep your gear safe.

Mounting Options Galore
More 1/4"-20, 3/8"-16 and 1/2"-13 threads than you can actually count. With holes for sash-cord and through-hole 3/8" slots for compatibility with other equipment, the Constellation doubles as one of the most sophisticated rigging plates out there. Choose between 75 and 100 mm Doughnuts, Flat Mount and Mitchell Mount options for use with any camera head.

Hi-Hat Latch Release
Already own a Glide Like the 3-in-1 Now try 4-in-1. The Constellation comes equipped with a quick release latch for Medium/Large Hi-Hat compatibility. But the similarities don't end there- many of their accessories for the Glide Line also work for the Galaxy Line!

The modularity of the Hi-Hat gives the operator tremendous freedom. The top mount may be quickly changed between 75mm, 100 mm, 150mm, Mitchell or Flat Mount configurations to accommodate nearly any type of camera head. The stackable step rod legs may be exchanged to bring the camera package either higher or lower.

Industry Standard Speed Rail
Each of their Galaxy Line Skater Dollies runs on standard 1-1/4" aluminum pipe (1.660" outside diameter). Need to travel light Purchase rail from a local hardware store or rental house at your destination. Increase the length of travel by linking rail sections via their Speed Rail Connectors. Then simply place Middle Truss Supports as needed.

Aluminum End Truss
Mount Baby Feet directly to the underside of the Trusses at a 15-degree angle or mount a 5/8" light stand, c-stand or baby pin to the receiver directly. Utilize a Truss-to-Tripod Adapter and place the system on a tripod of your choice. They take great pride in the workmanship and quality of each one of their systems. All of their products are built to last and the Glide is no exception. Made of anodized aluminum and stainless steel, all of the components are incredibly robust and built to handle the rigors of production work.

They are also proud to be Made in America. All of their custom components are designed, machined and assembled in the New York City and Tri-State area. The Level 5 is the medium sized offering in the MYT Works Galaxy Line. With a 10" footprint, high load capacity, Hi-Hat compatibility, Quatripod Turret Adapters, and- of course- Skater Dolly mode, it does it all. They have been manufacturing and delivering systems since 2010 with one goal: to create the strongest, smoothest and most portable systems available.

Spring-Loaded Wheel Module
Traditional skateboard dollies use wheels that merely rest upon the rails. Their MYT Skater Dollies' unique spring-loaded wheel modules grip the rails. This provides the smoothest motion possible adjusting for any inconsistencies in the rails all the while keeping your camera setup secure. Further, they include a brake SRP Locking Bolt with every set of modules to prevent run-away situations and keep your gear safe.

Mounting Options Galore
More 1/4"-20, 3/8"-16 and 1/2"-13 threads than you can actually count. With holes for sash-cord and through-hole 3/8" slots for compatibility with other equipment, the Constellation doubles as one of the most sophisticated rigging plates out there. Choose between 75 and 100 mm Doughnuts, Flat Mount and Mitchell Mount options for use with any camera head.

Hi-Hat Compatibility
Already own a Glide Like the 3-in-1 Now try 4-in-1. The Level 5 supports both Small and Medium/Large Hi-Hats. Mount the Hi-Hat directly via SRP Locking Bolts or their quick release Duplex accessory. But the similarities don't end there- many of their accessories for the Glide Line also work for the Galaxy Line!

The modularity of the Hi-Hat gives the operator tremendous freedom. The top mount may be quickly changed between 75 mm, 100 mm, 150 mm, Mitchell or Flat Mount configurations to accommodate nearly any type of camera head. The stackable step rod legs may be exchanged to bring the camera package either higher or lower.

Industry Standard Speed Rail
Each of their Galaxy Line Skater Dollies runs on standard 1-1/4" aluminum pipe (1.660" outside diameter). Need to travel light Purchase rail from a local hardware store or rental house at your destination. Increase the length of travel by linking rail sections via their Speed Rail Connectors. Then simply place Middle Truss Supports as needed.

Aluminum End Truss
Mount Baby Feet directly to the underside of the Trusses at a 15-degree angle or mount a 5/8" light stand, c-stand or baby pin to the receiver directly. Utilize a Truss-to-Tripod Adapter and place the system on a tripod of your choice. They take great pride in the workmanship and quality of each one of their systems. All of their products are built to last and the Glide is no exception.

Made of anodized aluminum and stainless steel, all of the components are incredibly robust and built to handle the rigors of production work. They are also proud to be Made in America. All of their custom components are designed, machined and assembled in the New York City and Tri-State area. The Knuckle and Bare Knuckle the smallest, most portable camera Skater Dolly system ever designed. It fits in a backpack yet can carry a substantial payload for its size. It also features their spring-loaded wheel modules, which provide clean starts and stops without backlash. They have been manufacturing and delivering systems since 2010 with one goal: to create the strongest, smoothest and most portable systems available.

Spring-Loaded Wheel Module
Traditional skateboard dollies use wheels that merely rest upon the rails. Their MYT Skater Dollies' unique spring-loaded wheel modules grip the rails. This provides the smoothest motion possible adjusting for any inconsistencies in the rails all the while keeping your camera setup secure.

More 1/4"-20, 3/8"-16 and 1/2"-13 threads than you can actually count. With holes for sash-cord and through-hole 3/8" slots for compatibility with other equipment, the Knuckle doubles as one of the most sophisticated- yet compact- rigging plates out there.

Aluminum End Truss
Mount Baby Feet directly to the underside of the Trusses at a 15-degree angle or mount a 5/8" light stand, c-stand or baby pin to the receiver directly. Utilize a Truss-to-Tripod Adapter and place the system on a tripod of your choice.

19 mm Threaded Rails
The 19 mm stackable rails are center less ground, polished and finished to a tolerance of 0.001", creating a seamless joint between rail spans. Create a track of any length by connecting different length spans via stainless steel threaded inserts.

Hi-Hat Latch Release
Already own a Glide Like the 3-in-1 Now try 4-in-1. The Knuckle comes equipped with mounting pattern for Small Hi-Hat compatibility. But the similarities don't end there- many of their accessories for the Glide Line also work for the Galaxy Line!

The modularity of the Hi-Hat gives the operator tremendous freedom. The top mount may be quickly changed between 75mm, 100mm or Flat Mount configurations to accommodate nearly any type of camera head. The stackable step rod legs may be exchanged to bring the camera package either higher or lower.

Doughnut Mounting Options
Choose between 75 mm or 100 mm Doughnuts or a Flat Mount for use with any camera head. They take great pride in the workmanship and quality of each one of their systems. All of their products are built to last and the Glide is no exception. Made of anodized aluminum and stainless steel, all of the components are incredibly robust and built to handle the rigors of production work. They are also proud to be Made in America. All of their custom components are designed, machined and assembled in the New York City and Tri-State area.

Galaxy Line
The Galaxy Line is based on the MYT Works ethos: more functionality with less equipment. It is not only a modern take on the ubiquitous skateboard dolly but also a full-feature camera rigging and support system. Fully modular, each system packs in one case for ease of transport. Carry the rails with you or procure them on location: no longer must a filmmaker travel with oversized, proprietary dolly rail sections. In need of an usually long run Simply stack the rails together. Small cameras or large, low shots or high, static setups or dolly moves, the Galaxy Line is meant to be a go-to tool for all filmmakers.