MYT Works Constellation Standard Skater Kit, Mitchell Mount

The Constellation is the most sophisticated camera mounting platform available today. Period. With a large footprint, ultra-high load capacity, native one latch release for your MYT Hi-Hat, native mitchell mount, capacity to mount with multiple doughnuts, multiple insert tripod and quatripod mounting options and dolly camera motion potential. Use the Constellation to take any static shot from any angle. Now use the same platform to create a camera slider dolly with skater wheel inserts.

Either use generic speed rail for this or use MYT Works custom threaded rails to create infinite track. The same speed rail or custom track can also be used with their Turret leg support system, effectively transforming your Constellation into a tripod or quatripod Hi-Hat. More than 140 points of attachment allow for use with a plethora of MYT accessories, in addition to any fixture or accessory fitted with 1/4-20, 3.8 or 1/2-13 mounting inserts. The sky is the limit as to what you can do with the Constellation. Super strong platform, rock solid base, far superior to any tripod, with unheard-of articulated leg sections for any imaginable configuration.

Here are the items you receive with this kit:

• One Constellation Skater Dolly Plate
• Four Skater Modules
• One Constellation End Support (2pk)
• One Mitchell Flush Plate
• Two 1/4"-20 Bullseye Levels

The Constellation is the largest offering in the MYT Works Galaxy Line. With a 14" footprint, ultra-high load capacity, native Hi-Hat compatibility, Quatripod Turret Adapters, and- of course- Skater Dolly mode, it does it all. MYT Works have been manufacturing and delivering systems since 2010 with one goal: to create the strongest, smoothest and most portable systems available.

Spring-Loaded Wheel Module
Traditional skateboard dollies use wheels that merely rest upon the rails. MYT Skater Dollies' unique spring-loaded wheel modules grip the rails. This provides the smoothest motion possible adjusting for any inconsistencies in the rails all the while keeping your camera setup secure. Further, MYT Works include a brake SRP Locking Bolt with every set of modules to prevent run-away situations and keep your gear safe.

Mounting Options Galore
More 1/4"-20, 3/8"-16 and 1/2"-13 threads than you can actually count. With holes for sash-cord and through-hole 3/8" slots for compatibility with other equipment, the Constellation doubles as one of the most sophisticated rigging plates out there. Choose between 75 and 100 mm Doughnuts, Flat Mount and Mitchell Mount options for use with any camera head.

Hi-Hat Latch Release (This Model has Mitchell Mount)
Already own a Glide Like the 3-in-1 Now try 4-in-1. The Constellation comes equipped with a quick release latch for Medium/Large Hi-Hat compatibility. But the similarities don't end there - many of their accessories for the Glide Line also work for the Galaxy Line! The modularity of the Hi-Hat gives the operator tremendous freedom. The top mount may be quickly changed between 75mm, 100 mm, 150mm, Mitchell or Flat Mount configurations to accommodate nearly any type of camera head. The stackable step rod legs may be exchanged to bring the camera package either higher or lower.

Industry Standard Speed Rail
Each of MYT Works Galaxy Line Skater Dollies runs on standard 1-1/4" aluminum pipe (1.660" outside diameter). Need to travel light Purchase rail from a local hardware store or rental house at your destination. Increase the length of travel by linking rail sections via MYT Works Speed Rail Connectors. Then simply place Middle Truss Supports as needed.

Aluminum End Truss
Mount Baby Feet directly to the underside of the Trusses at a 15-degree angle or mount a 5/8" light stand, c-stand or baby pin to the receiver directly. Utilize a Truss-to-Tripod Adapter and place the system on a tripod of your choice. MYT Works take great pride in the workmanship and quality of each one of their systems. All of MYT Works products are built to last and the Glide is no exception. Made of anodized aluminum and stainless steel, all of the components are incredibly robust and built to handle the rigors of production work. MYT Works are also proud to be Made in America. All of their custom components are designed, machined and assembled in the New York City and Tri-State area.

Galaxy Line
The Galaxy Line is based on the MYT Works ethos: more functionality with less equipment. It is not only a modern take on the ubiquitous skateboard dolly but also a full-feature camera rigging and support system. Fully modular, each system packs in one case for ease of transport. Carry the rails with you or procure them on location: no longer must a filmmaker travel with oversized, proprietary dolly rail sections. In need of an usually long run Simply stack the rails together. Small cameras or large, low shots or high, static setups or dolly moves, the Galaxy Line is meant to be a go-to tool for all filmmakers.