Nikon HB-23 Bayonet Hood for 10-24mm f3.5/4.5, 12-24mm f/4G, 16-35mm F4, 17-35mm f/2.8D AF-S & 18-35mm f/3.5-4.5 D-AF Lens

2024-03-07T18:58:29

Much needed hood for a great lens (17mm-35mm). Leave on the hood and get the superior Nikon hood cover.

Michael S.

2022-07-05T11:05:56

Plastic and black, like its description said.

James D.

2021-12-28T07:36:53

It works as it is supposed to. It probably could be less expensive for such a flimsy piece of plastic but hey, it does the job.

ABHIJIT M.

2021-01-27T07:22:53

This product is missing a feature; the original lens hood for the 10-24mm lens could be easily stored by installing it backwards on the lens (it would lock into the lens rim groove). This product will not lock into the lens groove when installed backwards for storage and will fall off as a result.

ART A.

2020-06-11T15:46:11

Works great as advertised for the approiate lenes. Go with Nikon you can’t loose.

WILLIAM H.

2019-03-19T13:59:49

Perfect replacement!

CHARLES B.

2018-03-12T08:10:22

I've used this hood on the 17-35mm f/2.8 AF-S and the 12-24mm f/4 DX lenses. It does a pretty decent job but would be better if it had something similar to the locking mechanism that Nikon uses on the HB-48 hood for the 70-200 f/2.8 VR II.

KENNETH W.

2017-08-18T20:00:00

Mine broke after only a few months and I glued it which lasted several months...now broken again.

Marg928

Originally posted at

2017-06-02T09:15:03

Very very loose when installed on the lens, falls off very easily? Had to put a piece of tape on then and mount lens hood on that to hold it tight.

ERIC C.

2017-05-11T22:54:54

Great price. Exactly what I wanted.

MARK T.

2017-04-26T11:34:18

can't beat made by Nikon. be a little careful as it does not lock on tightly

JOHN H.

2017-03-07T07:48:45

I broke my lens hood in India. I ordered a replacement from Adorama on my iPad that night. When I returned to California, the replacement lens hood was waiting for me and it fit perfectly on my lens.

HARVEY R.

2016-11-22T07:42:58

Please buy original from Nikon, don't by after market hood.

ANDREW N.

2014-06-17T21:00:00

Typical Nikon quality but you get what you pay for. Original lens hood was cracked after years of use. This replacement was perfect. Prompt delivery from Adorama for this OEM replacement!

BillinTampa

2014-04-02T21:00:00

I bought a used Nikon 16-35 f/4 VR & it did not come with the hood. So, I purchased this one. As this is the same hood that would've come with that lens new, it works perfectly.

KEVIN C.

2014-02-18T19:00:00

My original lens hood cracked and rather than going for an aftermarket one, I went with a Nikon replacement. Works fine, quick ship, no complaints. Works as advertised.

MARK G.

2013-10-28T21:00:00

I use it on my lens. It is exactly like the one I accidentally broke. It is perfect.

Kevin H.

2013-05-27T21:00:00

It has a tendency to pop off the lens, but it's the one that goes with the camera, so I had to get another one after the other one broke.

Harry

2013-05-21T21:00:00

I've gone through a few of these hoods over the years. They're lightweight but they do have weak points where they tend to break - where the "petals" meet. That said, I think they have saved my lenses from damage at least once. The price isn't too outrageous so

THOMAS S.

2013-02-06T19:00:00

Great factory replacement!

MICHAEL T.

2013-01-28T19:00:00

Product works as advertised!

MICHAEL T.

2012-12-12T19:00:00

Wide angle lens flare...needed!

MaxmPhoto1

2012-09-09T21:00:00

Good stuff

John

2012-09-09T21:00:00

Another great deal from Adorama.

AC

2011-06-24T20:00:00

I have a wonderful Nikon 17-35 F2.8 lens. While I owned only one of these, it seems I have owned 3 HB23 hoods. They are very fragile in the area between the bayonet mount and the wall area. In my view, they tend to break under the stress of normal use. In my opinion if the sections were increased slightly, the problem would go away.

Dave S.

Originally posted at

2011-02-19T19:00:00

I use this primarily to keep the lens from getting banged up but it does keep some extraneous light off of the front element.

Mooredrum

2009-03-29T21:00:00

This is a high quality product, made in Japan. I also bought the same hood but made by after-market manufacture which can not be compared to the quality of the Nikon products. Yes, it does shield from flares, but not much. I always leave it at home and prefer to cover the lens with my hand if needed.

T.K

2009-02-19T19:00:00

Reliable and on time.

sicoactiva

2009-02-05T19:00:00

Good protection for lens and also shields lens from flares.

fdisker2000