Onkyo TX-NR595 7.2-Channel Network A/V Receiver, 170W Per Channel (At 6 Ohms)

SKU: ONTXNR595

This item is no longer available.

Recommended Alternatives

Overview
Compare
Specs
Q&A

Questions & Answers

Shopper : Why Did You Choose This?Carl C : I am Onkyo loyalist for over 30 years. I stand behind the brand.

Reviews about this item

Review Summary

Onkyo TX-NR595 Specifications

  • Channels

    7.2
    5.2.2 in Dolby Atmos or DTS:X Setups

  • Power Output per Channel

    80 W at 8 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2 Channels Driven, FTC
    170 W at 6 Ohms, 1 kHz, 10% THD, 1 Channel Driven

  • Dynamic Power

    85 W (8 Ohms, Front)
    125 W (4 Ohms, Front)
    160 W (3 Ohms, Front)

  • THD & Noise

    0.08% (20 Hz to 20 kHz, Half Power)

  • Frequency Response

    10 Hz to 100 kHz / +1, -3 dB (Direct Mode)

  • Tone Control

    Bass: +/-10 dB, 20 Hz
    Treble: +/-10 dB, 20 kHz

  • Signal-to-Noise Ratio

    Line, IHF-A: 106 dB
    Phono, IHF-A: 80 dB

  • Speaker Impedance

    4 to 16 Ohms

  • Audio Processing: Dolby

    Dolby Atmos, Dolby TrueHD

  • Audio Processing: DTS

    DTS:X, DTS Virtual:X, DTS-HD Master Audio, DTS Neural:X Upmixing

  • Audio Processing: DAC

    384 kHz / 32-Bit AKM

  • Tuner Type

    FM/AM

  • Tuning Frequency Range

    FM: 87.5 to 107.9 MHz
    AM: 530 to 1710 kHz

  • Tuner FM/AM Preset Memory

    40 Stations

  • Bluetooth

    Yes

  • Wi-Fi

    Dual-Band (2.4 / 5 GHz)

  • Inputs

    6x HDMI
    1x RCA Digital Coaxial
    1x Optical TOSLINK
    5x Stereo RCA (1 Phono with Ground Screw)
    1x 1/8" / 3.5 mm Aux (Front)

  • Outputs

    2x HDMI
    2x RCA Subwoofer Pre-Out
    1x Stereo RCA Zone B
    1x 1/4" / 6.35 mm Headphone (Front)

  • Other Interfaces

    1x RJ45 Ethernet LAN
    1x AM Antenna
    1x FM Antenna
    1x 1/8" / 3.5 mm Setup Mic (Front)
    1x USB Power Output (5 V/1 A)

  • Speaker Connectors

    9x Banana Plug-Compatible Binding Post Pairs

  • Input Sensitivity and Impedance

    Line: 200 mV RMS / 47 kohms
    Phono MM: 3.5 mV RMS / 47 kohms

  • Power Requirements

    120 VAC, 60 Hz

  • Power Consumption

    Operational: 460 W
    No Sound: 55 W
    Standby: 0.15 W

  • Dimensions (WxHxD)

    17.13 x 6.83 x 14.94" (43.51 x 17.35 x 37.95cm)

  • Weight

    20.7 lbs (9.39kg)

About Onkyo TX-NR595

Smart, simple, sensational surround-sound
With six HDMI inputs and dual outputs integrating players, TV and projector, you're set for a 4K HDR video experience inside Dolby Atmos or DTS:X sound delivered through any speaker layout. Dolby Atmos Height Virtualizer and DTS Virtual:X create an immersive 3D soundfield without height or surround speakers connected, while Dolby Surround and DTS Neural:X add overhead dimensionality to regular soundtracks when played through layouts with height speakers.

SMART AV Receiver bundles Amazon Music, Spotify, Pandora, TIDAL, Deezer and TuneIn together with Works with Sonos, AirPlay 2 , DTS Play-Fi and FlareConnect solutions so you can enjoy wireless audio all around your home. Powered Zone 2 speaker outputs can play the same or different sources (including HDMI) in one or both zones and you can keep your surround layout connected and switch between MAIN and Zone 2 in seconds. Joined by stress-melting features such as an all-new simple remote with DSP-based Vocal Enhancer function and backed by DAA's high-current muscle, this A/V powerhouse has everything it takes to make life great.

Amplifier Features
• 170 W/Ch (6 ohms, 1 kHz, 10% THD, 1 channel driven), 80 W/Ch (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2 channels driven, FTC)
• Dynamic Audio Amplification
• High-Current Low-Noise Power Transformer
• Customized power capacitors and quality audio parts
• Wide-range non-phase-shift amplifier topology
• Discrete low-distortion amplifier output stages
• High-current driving power for 4-ohm speakers

Video & Audio Support
• Supports HDCP 2.2, 4K/60p, HDR (Dolby Vision, HDR10, HLG, BT.2020), 4:4:4 color-space, BT.2020, 3D Video, ARC (Audio Return Channel), DeepColor, x.v.Color and LipSync via HDMI
• Dolby Atmos, DTS:X, Dolby TrueHD and DTS-HD Master Audio decoding
• Dolby Atmos Height Virtualizer and DTS Virtual:X 3D sound processing
• Dolby Surround and DTS Neural:X upmixing technologies
• Supports SACD (Super Audio CD) Playback via HDMI (2.8 MHz/2ch, multi-channel)
• High-grade AKM (AK4458) 384 kHz/32-bit multichannel D/A conversion
• VLSC (Vector Linear Shaping Circuitry) digital output filtering (Front L/R)
• PLL (Phase Locked Loop) anti-jitter technology for S/PDIF audio
• DSP Sound Enhancement Modes for gaming (Rock, Sports, Action and RPG)
• Theater-Dimensional virtual surround-sound function
• Direct Mode for audio reproduction close to original source quality
• Tone controls (bass/treble) for front L/R channels

Network Features
• Works with Sonos integration with the Sonos Home Sound System
• SMART AV Receiver integrates streaming services, Works with Sonos, AirPlay 2, DTS Play-Fi and FlareConnect multi-room audio with remote app control
• Supports Onkyo Controller streaming and remote app
• Hi-Res Audio playback (DSD 5.6 MHz/2.8 MHz; FLAC, WAV [RIFF], AIFF and ALAC to 192 kHz/24-bit)
• Bluetooth wireless audio streaming technology

Connection Features
• Stable and secure dual-band 5 GHz/2.4 GHz Wi-Fi
• Built-in phono pre-amp equalizer for Moving Magnet (MM) cartridges
• 6 HDMI inputs and 2 outputs (MAIN with ARC, SUB)
• 2 digital audio inputs (optical/coaxial, assignable)
• 4 analog RCA inputs (assignable)
• 1/8" (3.5 mm) AUX analog input (front)
• 1/4" (6.35 mm) headphone jack (front)
• 1/8" (3.5 mm) AccuEQ setup mic input (front)
• 7 banana-plug-compatible screw-type speaker posts
• Dedicated banana-plug compatible screw-type speaker posts for Zone 2 audio distribution
• Zone B analog RCA line-out
• 2 subwoofer pre-outs
• Ethernet LAN terminal for wired network connection
• Rear USB input for audio playback

Advanced Features
• Advanced Music Optimizer improves playback quality of compressed audio
• AccuEQ Room Acoustic Calibration, Subwoofer EQ and AccuReflex
• DSP Vocal Enhancer boosts dialog audibility via remote keys or front panel
• Dedicated Powered Zone 2 speaker outputs with Zone 2 DAC and switching function supports playback of unique digital and analog sources in both zones simultaneously
• Zone B Line Out shares audio to audio components with RCA line input
• 1080p Full HD to 4K Ultra HD upscaling over HDMI
• GUI with overlaid OSD over HDMI
• Direct Mode for audio reproduction close to original source quality
• Tone controls (bass/treble) for front L/R channels
• Crossover adjustment for each channel (40/50/60/70/80/90/100/120/150/180/200 Hz)
• A/V Sync Control (up to 500 ms in 5 ms steps at 48 kHz)
• On-screen guide displays step-by-step instructions for quick and easy system setup
• Standby (All), CEC Standby, Network Standby, Bluetooth Wake on Play Standby and HDMI Passthrough modes
• IP control support for home automation systems via LAN
• 3-mode display dimmer (normal/dim/dimmer)
• 40 FM/AM random presets
• Redesigned simple remote control

SMART AV Receiver
SMART AV Receiver is the heart of your home entertainment system. Access streaming content from Amazon Music, Pandora, Spotify, TIDAL, Deezer and TuneIn and share sound as part of a multi-room system via Works with Sonos, Chromecast built-in, AirPlay 2, DTS Play-Fi and FlareConnect.

Works with Sonos
This Onkyo receiver can join your existing Sonos Home Sound System or be the start of a new one, just by pairing it with a Sonos Connect. The AVR ties into the Sonos ecosystem, waking, changing inputs and playing at the desired volume on command from the Sonos app.

Dolby Atmos and DTS:X - setting sound free
Dolby Atmos and DTS:X formats allow engineers to map sound anywhere in 3D space, effects moving from speaker to speaker all around the room and wrapping your audience in the latest films and games. You can also enjoy your 3D speaker layout with classic titles. Dolby Surround and DTS Neural:X find overhead cues in legacy soundtracks and upmix for awesome spatial realism.

Dolby Atmos Height Virtualizer
When playing any Dolby format, engaging Dolby Atmos Height Virtualizer (Enabled with a future firmware update) enables a more immersive listening experience, creating a virtual surround and height effect from traditional speaker layouts without employing additional surround or height speakers.

Dynamic Audio Amplification
Refined over 70 years to deliver emotion in high fidelity, DAA features a custom High-Current Low-Noise Power Transformer, customized capacitors and discrete amp output stages. Unique topology prevents phase-shift while high current improves speaker control for true dynamic speed. Driving 4-ohm loads through all channels, DAA has power to move.

Powered Zone 2
Connect speakers in another room to the Powered Zone 2 outputs to share analog and digital audio sources, including HDMI inputs and digital audio. These terminals are separate from those connecting your home theater, so keep your 7.2 or 5.2.2-ch layout and switch to multi-zone audio anytime using remote or Onkyo Controller. Play different sources in either zone simultaneously, synchronize playback in both or distribute audio to Zone 2 exclusively.

Ready for 4K HDR entertainment
Enjoy support for HDR (High Dynamic Range) video including HDR10, HLG, Dolby Vision and BT.2020. The 4:4:4 color space is also supported. Six HDMI inputs, ARC-ready MAIN OUT and SUB OUT pass 4K/60p and HDR video from player to compatible TV and projector and all terminals are HDCP 2.2 compliant.

Onkyo TX-NR595 Features

  • 170 watts per channel
  • Works with Sonos
  • SMART AV Receiver with Spotify, Amazon Music, Pandora, TIDAL, Deezer, TuneIn and multi-room audio technologies
  • Supports AirPlay 2
  • 5.2.2-ch Dolby Atmos and DTS:X playback
  • Dolby Atmos Height Virtualizer and DTS Virtual:X
  • Supports 4K/60p and HDR (HDR10, HLG, Dolby Vision, BT.2020)
  • Dynamic Audio Amplification with High-Current Low-Noise Power Transformer
  • AccuEQ with subwoofer EQ and AccuReflex
  • Vocal Enhancer function improves voice audibility
  • Zone B line-out shares any audio source to components with an RCA input, such as wireless headphone docks, etc
  • Two HDMI outputs for simultaneous TV and projector connection (MAIN/SUB)
  • 1080p Full HD to 4K Ultra HD upscaling over HDMI

What's in the box:

  • Onkyo TX-NR595 7.2-Channel Network A/V Receiver
  • Remote Control
  • 2x AAA Batteries
  • Setup Microphone
  • Indoor FM Antenna
  • AM Loop Antenna
  • Onkyo 2 Year Limited Warranty