Proaim 14' Camera Crane with Jib Stand with Sr. Pan-Tilt Head and Joystick Box

Capture smooth, dynamic sweeping pans shots similar to Hollywood production style with Proaim 14ft fully featured camera crane production package. The Aluminum constructed robust ribbed section jib crane assembles quickly without tools to benefit on-location productions. Known for its high strength and machined intersecting joints with secure assembly. At the end of your shoot, the camera boom breaks down into two 4 parts for easier travel and storage. Stainless steel support cables are included for maximum support of heavy loads with better stability.

Sr. Pan tilt head with joy stick control features360 degree end-less tilting movement and 360 degree panning movement with reversal point. The Proaim Zoom Control for DV Cameras is a universal controller for LANC and Panasonic Mini DV or HDV cameras, professional battery pack designed for portable and uninterrupted applications. Adding production value through shot selection just got a whole lot easier with PROAIM 14ft Camera Crane with Jib Stand and Sr. Pan-Tilt Head

14ft Camera Crane

High Capacity Camera Base Platform
High-capacity Camera Base platform is built to exacting standards for a remarkably stable point. It allows direct camera mounting on jib. Superior design set this base platform apart from others.

Ribbed Section Camera Crane Arm Body for High Strength
Ribbed sections makes the jib arm stronger & durable. It supports cameras up to 15lbs without pan tilt Head and 10lbs when using with pan tilt head. The cable-tensioned design of the Proaim 14ft camera crane allows it to reach farther and higher while maintaining stability.

Machined Intersecting Joints For Quick And Secure Assembly
Intersection joint assembly allows for quick and secure connection. A solid stainless steel thumbscrew assures a tight and secure fit from above and below the camera crane arm.

Central Fork with Thrust Roller Bearings To House Heavy Axial Loads And Shock Loads
The fork provides you a maximum stability, smooth movements & jerk free shots. Thrust needle roller bearings are fitted with a form-stable cage to reliably guide and keep many needle rollers. These bearings enable to house heavy axial loads and shock loads.

Locking Pins for Stable Or Moving Shots
High strength SS locking pin is used at the pivot point, and is connected properly to prevent from ever being lost.
• The control handle can be unlocked by releasing the locking pin to get moving shots.
• You can achieve fixed camera angles when controlling handle is pin locked.

Cables And Couplings
Our modular cable system boosts camera crane stability and rigidity. The superior-quality cable tensioning system keeps the 14ft camera crane taut, rock solid and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime.

LCD Mounting Provision
The LCD Mounting Arm for LCD Monitor comes with this camera boom.

Weight-Closers (Included)
Stronger Hi-tensile weight closers help to achieve perfect balance.

Sr. Pan Tilt Head
Designed for DV, HDV and broadcast cameras weighing upto 7.5kg / 16.5lbs or less. Our Proaim Senior Pan Tilt head offers 360 degree endless panning and tilting with reversal points.

Sr. Pan-Tilt Head Features
• Runs on 12v DC power produced by the included A/C adapter or also accepts external 12V DC battery power through the included 3mtr long 4 pin XLR cable for outdoor shooting
• You receive the Pan-Tilt Head with assembled wiring for Top and Bottom Motor
• To install Power out to head (4 pin connector) and 12 volt DC power (4 pin XLR) in rear of joystick box

Joystick Control Features
• The Joystick control system includes a 15 mt long operating cable and AC adapter
• Operational from a flat surface in handheld mode or when attached to the bottom of the jib arm
• Joystick has proportional linear movement i.e. farther you move the joystick, the faster the head moves
• Joystick is touch sensitive
• Small movement - less speed
• More movement - more speed