
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Silver, Salt resistant coating
DC 12 V to 21.8 V (DC IN connector)
DC 42 V to 57 V (PoE++ power supply)
3.1 A to 5.5 A (DC IN connector)
1.2 A (PoE++ power supply)
5 Degree F to 113 Degree F (-15 Degree C to 45 Degree C) (preheating is required when 23 Degree F (-5 Degree C) or less)
10% to 100% (no condensation)
-4 Degree F to 131 Degree F (-20 Degree C to 55 Degree C)
10% to 95% (no condensation)
IP65 compliant
15 m/sec: Operates normally
50 m/sec: Operation possible
60 m/sec: No damage
Installed as standard
Installed as standard
Installed as standard
AW-RP120G, AW-RP50, AK-HRP200G
1/2.86"-type Full-HD 3MOS
Optical 20x zoom/10x digital zoom, F1.6 to F3.4 (f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm)
Switching between auto and manual
Entire zooming range: 2.62' (800mm)
Wide end: 1.31' (400mm)
3MOS
2 lx (50 IRE, F1.6, 36 dB, without accumulation)
1000 TV lines Typ (Center area)
Auto, 0 dB to 42 dB (1 dB steps)
37 dB to 42 dB is Super Gain Mode
0 dB, 6 dB, 12 dB, 18 dB, 24 dB
This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p, or 1080/25PsF.
When [Iris Mode] or [Focus Mode] is set to [Auto], this cannot be set to 18 dB or 24 dB.
59.94p/59.94i: 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
29.97p: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
23.98p: 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
50p/50i: 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
25p: 1/25, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
59.94Hz: 60.15 Hz to 642.21 Hz (255 steps)
50Hz: 50.15 Hz to 535.71 Hz (255 steps)
HD, FILMLIKE1, FILMLIKE2, FILMLIKE3
0.30 to 0.75 (Manual setting)
AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K)
OFF, -99% to 40%
Scene1, Scene2, Scene3, Scene4
Auto function for each of accumulation, gain, iris, electronic shutter, ND, and ATW
1080/59.94p, 1080/29.97p, 1080/23.98p, 1080/59.94i, 1080/29.97PsF, 1080/23.98PsF, 720/59.94p, 1080/50p, 1080/25px1 , 1080/50i, 1080/25PsF, 720/50p
Internal/External synchronization (BBS/Tri-level sync)
Input Impedance:
High impedance
Input:
2 channels, XLR balanced input
Input signal level: +4 dBu/0 dBu/-20 dBu (selectable in menu)
Volume variable range: -40 dB to +12 dB (can be changed in 1 dB steps in the menu)
Output:
4 channels, superimposed over SDI output
Embedded audio output level:
FS-12 dB: -12 dBFS, FS-18 dB: -18 dBFS, FS-20 dB: -20 dBFS (selectable in menu)
Sampling frequency: 48 kHz (synchronized to video)
Quantization bit rate: 24-bit (LPCM)
Audio compression format (IP): G.726, AAC-LC (High quality)
12V IN:
XLR connector
G/L IN:
BNC connector
BBS (Black Burst Sync), tri-level sync supported
Locking to a subcarrier is not possible with BBS.
Audio input:
mini XLR connector (line input)
#1: INPUT1 Common, #2: INPUT1 HOT, #3: INPUT1 COLD, #4: INPUT2 Common, #5: INPUT2 HOT, #6: INPUT2 COLD
HD-SDI OUT:
SMPTE424/SMPTE292 standards
75 Ohm (BNC x 2)
OSD output is possible from the SDI OUT 1/PM connector but not from the SDI OUT 2 connector.
LAN:
LAN connector for IP control/video output/audio output
PoE++ power supply
PoE++ (IEEE802.3bt Draft ver.2.0 standard)
RS-422:
CONTROL IN RS-422A
EXT:
#1: DC GND, #2: HOT, #3: COLD, #4: 12V-OUT
Stand-alone (Desktop) or suspended (Hanging)
To ensure safety, the unit must be secured using the mount bracket supplied.
IP Connecting Cable:
When connecting through a PoE++ hub:
LAN cable (category 5e or above, straight cable), max. 328' (100m)
When a PoE++ hub is not used:
LAN cable (category 5 or above, straight cable) max. 328' (100m)
AW Series Connecting Cable/Standard Protocol Connecting Cable:
LAN cable (category 5 or above, straight cable), max. 3280' (1000m)
Maximum speed 60 Degree /s or higher
+/-175 Degree
For suspended installations, the positions of the pins that determine the movement range must be changed.
-30 Degree to 210 Degree
Depending on the pan or tilt position, the camera may be reflected in the image.
For suspended installations, the positions of the pins that determine the movement range must be changed.
60 Degree /s (NC45 or less)
D.I.S.S. (Dynamic Image Stabilizing System)
10.15 x 14 x 15.62" (258 x 357 x 397mm) (Including protrusions and cable cover)
Approx. 19.84 lbs (9kg)
885170357488
The AW-HR140 is an integrated remote camera system that incorporates an outdoor housing, camera, lens and pan-tilt head and maintains stable shooting performance in the toughest of environments. It is equipped with the same DSP and full HD 3MOS sensors as the AW-HE130 which results in high sensitivity, high S/N ratio, and high resolution due to its advanced video processing.
The AW-HR140 Gives You Broadcast Quality Where Other Cameras Can't
The camera features 1/2.86-type full HD 3MOS sensors and a motorized 20x zoom lens. Sophisticated image processing affords high sensitivity with low noise and horizontal resolution of 1000 TV lines. The water and dust-resistant case likewise resists salt damage and features a wiper. Stable images are captured with vibration compensation provided by the newly-developed Dynamic Image Stabilizing System (D.I.S.S.), a valuable asset in the event of high winds or related unstable weather conditions.
Super Haze Reduction
The AW-HR140 boasts haze-reduction technology -- valuable for outdoor environments such as weather reporting -- for ensuring optimal image reproduction. In certain situations, picture contrast may be low as result of environmental fog or haze conditions, and the Haze Reduction function will optimize camera image settings appropriately to assure that the subject of shooting is as clear as possible.
Pro Output & Control
Output formats for the AW-HR140 include 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 1080/29.97p, 1080/25p, 1080/23.98p, 1080/29.97PsF, 1080/25PsF, 1080/23.98PsF, 720/59.94p and 720/50p.
Using an IP connection, up to 100 x HR140 cameras can be controlled by the AW-RP120G/RP50 remote camera controller via a switching hub. One camera can also be operated by up to five remote camera controllers via IP connection.
Rain, Sleet or Snow
Parts of the AW-HR140 have a special coating to protect against severe salt damage, enabling installations in areas subject to salt air. Polybutylene Terephthalate and Polyphenylene Sulfide materials are used to provide resistance to high-heat and abrasion, while frost, ice, and condensation are prevented by built-in heating in environments as cold as -15 Degree C (5 Degree F). Even in blizzards, snow that hits the glass surface melts off to maintain visibility.