
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
17.8mm (0.7") diagonal (4:3 aspect ratio)
DLP chip, DLP system
786,432 (1,024 x 768), total of 786,432 pixels
Optional powered zoom/focus lenses and fixed-focus lens
2x 420W UHM lamps
1.27-15.24m (50-600") (1.27-5.08m (50-200") with the ET-DLE055), 4:3 aspect ratio
10,000 lumens (dual lamp, LAMP MODE: NORMAL)
90%
10,000:1 (full on/full off, in dynamic iris 3 mode)
1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels)
HDMI/DVI-D: fH: 15-100kHz, fV: 24-120Hz, dot clock: 25-162 MHz
RGB: fH: 15-100kHz, fV: 24-120Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR):
525i (480i): fH 15.75kHz; fV 60Hz
625i (576i): fH 15.63kHz; fV 50Hz
525p (480p): fH 31.50kHz; fV 60Hz
625p (576p): fH 31.25kHz; fV 50Hz
750 (720)/60p: fH 45.00kHz; fV 60Hz
750 (720)/50p: fH 37.50kHz; fV 50Hz
1125 (1035)/60i: fH 33.75kHz; fV 60Hz
1125 (1080)/60i: fH 33.75kHz; fV 60Hz
1125 (1080)/50i: fH 28.13kHz; fV 50Hz
1125 (1080)/25p: fH 28.13kHz; fV 25Hz
1125 (1080)/24p: fH 27.00kHz; fV 24Hz
1125 (1080)/24sF: fH 27.00kHz; fV 48Hz
1125 (1080)/30p: fH 33.75kHz; fV 30Hz
1125 (1080)/60p: fH 67.50kHz; fV 60Hz
1125 (1080)/50p: fH 56.25kHz; fV 50Hz
Video/S-Video: fH: 15.75kHz, fV: 60Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63kHz, fV: 50Hz [PAL/PAL-N/SECAM]
Vertical: +50% (powered) (+/-45 deg. with the ET-DLE085), horizontal: +/-10% (powered) (Optical axis shift function cannot be operated when used with the ET-DLE055)
Vertical +/-40 deg. (+/-30 deg. with the ET-DLE085/ET-DLE055)
Ceiling/floor, front/rear
HDMI in: HDMI 19-pin, Deep Color, compatible with HDCP,525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p
VGA (640 x 480) - WUXGA (1,920 x 1,200)
Dot Clock: 25 MHz-162 MHz (Compatible with non-interlaced signals only)
DVI-D in: DVI-D 24-pin, DVI 1.0 compliant, HDCP compatible, (for single link only) 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p
VGA (640 x 480) - WUXGA (1,920 x 1,200)
dot clock: 25 MHz-62 MHz (Compatible with non-interlaced signals only)
RGB 1 in: 5x BNC
R: 0.7 Vp-p, 75Ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75Ohms,
B: 0.7 Vp-p, 75Ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
(SYNC/HD and VD terminals do not accept tri-level sync signals)
Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75Ohms
S-Video signal: Y: 1.0 Vp-p, C: 0.286 Vp-p, 75Ohms
RGB 2 in: D-sub HD 15-pin (female)
3D SYNC 1 in/out: BNC, 1.0 Vp-p, 75Ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA
3D SYNC 2 out: BNC, 1.0 Vp-p, 75Ohms, TTL, max. 10 mA
Video in: BNC, 1.0 Vp-p, 75Ohms
Serial in: D-sub 9-pin (female) for external control (RS-232C compliant)
Serial out: D-sub 9-pin (male) for link control (RS-232C compliant)
Remote 1 in: M3 jack for wired remote control
Remote 1 out: M3 jack for link control
Remote 2 in: D-sub 9-pin for external control (parallel)
LAN/DIGITAL LinK: RJ-45 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p
VGA (640 x 480) - WUXGA (1,920 x 1,200)
dot clock: 25 MHz -162 MHz
120-240 V AC, 10-5.2 A, 50/60 Hz
1,030 W (1,060 VA) (0.3 W with STANDBY MODE set to ECO, 3W with STANDBY MODE set to NORMAL)
40 dB (dual lamp operation, Lamp Mode: Normal)
0 to 45 deg. C / 32 to 113 deg. F
10%-80% (no condensation)
3V DC (AAA type battery)
Approx. 30m when operated from directly in front of the signal receptor
3m / 9.84'
Molded plastic
Projector: 498 x 200 x 513mm / 19.61 x 7.87 x 20.20"
Remote Control: 48 x 145 x 27mm / 1.89 x 5.71 x 1.06"
Projector: 17.6kg / 38.80lbs (without lens)
Remote Control: 102g / 3.60oz (including Batteries)





Panasonic's innovative dual-lamp system, with its new lamp, helps to make this body compact while providing 10,000lm of brightness, with 220-240V AC operation. When in 'Lamp Relay' mode, the system also eliminates any interruptions if a lamp should fail and enables 24/7 projection. Panasonic's dynamic RGB booster also achieves high image quality alongside excellent color reproduction and brightness. Similarly, a Detail Clarity Processor 3 brings further depth and clarity to details.
The projector's Dynamic Iris feature uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks and provides images with more detailed textures. In terms of maintenance and reliability, a dust-resistant optical block prevents dust entry to maintain image quality and a new cooling mechanism, featuring a heat-dissipating block that includes a heat pipe, reduces wear and tear on the device.
Combined with a lamp replacement cycle of up to 3,000 hours, the projector delivers reduced ownership and maintenance costs. For enhanced system integration, DIGITAL LINK compatibility allows HDMI, uncompressed video, audio and control signals to be delivered via a single LAN cable.