Used Microphone Accessories

Used DPA Microphones SM1500 Shock Mount for Omnidirectional and Directional Microphones

• Isolate microphone noise with pro shock mount.
• Durable build ensures long-lasting shock mount use.
• Universal compatibility with various mic models.
• Easy installation for quick microphone setup.
• Adjustable design for optimal mic positioning.

Used Saramonic SR-SMC11 Professional Universal Shock Mount for Shotgun Microphones 0.59-1.22

• Isolate unwanted noise with this microphone shockmount.
• Universal shock mount fits 0.59-1.22" shotgun mics.
• Robust build quality ensures long-term microphone support.
• Achieve optimal sound with 360° rotation & 150° tilt.
• Quick, easy installation onto 15mm mounting rods.

Used Rode PSA1+ Professional Studio Boom Arm

• Innovative parallelogram spring design for smooth microphone positioning
• Fully damped internal springs for silent operation and noise isolation
• Extended reach with full 360-degree rotation for precise mic placement
• Integrated cable management compatible with XLR and USB cables
• Supports microphones from 94g to 1.2kg with high-quality locking nuts for stability

Used H&A Broadcast Arm with Internal Springs and Integrated XLR Cable

• Durable steel & plastic desktop microphone stand.
• Integrated XLR cable ensures low noise recording.
• Adjustable mic stand extends up to 40 inches.
• Stable broadcast arm supports up to 5 lbs mics.
• Compatible with 5/8"-27 standard mic threads.

Used K&M 23323 Floor and Tabletop Microphone Stand, 13.77-22.44" Height, Black

• Stable microphone stand with a flat, round base.
• Adjustable height: 13.77-22.44" for perfect positioning.
• Durable steel construction ensures long-lasting use.
• Compatible with 5/8" threaded microphone connectors.
• Space-saving design ideal for desktops & studios.

Used Sennheiser Antenna Booster AB1-C Frequency Range 740-772MHz Gain 10dB

Used DJI Lightning Mobile Phone Adapter for Mic 3 Wireless Receiver

• Stable microphone support for clear audio.
• Durable design ensures long-term reliability.
• Seamless compatibility with Mic 3 receiver.
• Effortless adjustability for optimal positioning.
• Quick, easy setup enhances user experience.

Used Sound Devices CS-3 Production Case with High-Quality Strap for 302 Field Mixer, 7-Series Recorders and MixPre Mixer

• Durable Cordura fabric Sound Devices case.
• Portable case for field mixers & recorders.
• Secure your 7-Series Recorders in this case.
• Customizable compartments for audio equipment.
• Compact size: Perfect for MixPre mixer storage.

Used H&A Reflection Filter (Silver)

• Achieve superior sound isolation with this filter.
• Durable reflection filter ensures long-lasting use.
• Enjoy easy installation with included mounting gear.
• Perfect fit for most standard microphones & stands.
• Enhance recording quality with effective noise reduction.

Used Mole-Richardson Microphone Boom Stand

Used Rycote Standard Hole Softie Windscreen with 19-22mm (0.74-0.87") Hole Size

Used Sennheiser Fur Windshield for MKE 440 Stereo Shotgun Microphone

• Superior noise reduction for clear audio.
• Durable windscreen ensures long-lasting use.
• Easy installation on MKE 440 microphone.
• High-quality material for enhanced performance.
• Universal compatibility with shotgun mics.

Used Audio-Technica AT8120 Large Ball-Shaped Foam Windscreen

• Minimizes wind noise for clear audio recording.
• Ball-shaped windscreen ensures a secure, good fit.
• Durable foam construction provides lasting value.
• Enhances sound clarity by reducing unwanted pops.
• Easy to use; slips on quickly for field recording.

Used H&A Pop Filter with Gooseneck and Adjustable Knob (Clamp On)

• H&A Pop Filter: Superior noise reduction tech.
• Gooseneck design ensures easy, precise placement.
• Durable pop filter build for long-term reliability.
• Universal mic pop filter: Secure, clamp-on mount.
• Enhance audio quality with this microphone filter.

Used Sennheiser K6-P Powering Module, 30-20000Hz Frequency Response, Phantom Power Only, 200 Ohm Nominal impedance, On/Off Switch

• Transformerless balanced output on 3-pin XLR connector
• High output, low noise

Used Telex CHG-240 4 Bay Battery Charger for BP-240 Batteries

Used Monster Cable 12' iStudioLink Microphone mCable XLR to 1/8-Inch StereoMini Plug

Used Shure SBC-DC-903 DC Battery Eliminator for SLXD5 Digital Wireless Portable Receiver

• Provides clean power for optimal audio clarity.
• Low noise operation ensures pristine sound quality.
• Offers stable voltage for consistent performance.
• Durable build quality ensures long-term reliability.
• Compact size integrates easily into any setup.

Used Sennheiser CHG 2 US 2-bay Table Top Charger with U.S Power Supply for Evolution Wireless D1 Series Digital Bodypack System

• Sennheiser charger: Reliable power supply.
• Durable build ensures long-term performance.
• Compact size: Saves space on your desktop.
• Stable voltage output for optimal device use.
• Two-bay charger: Powers two devices at once.

Used Shure SBC850 8-Bay Networked Charging Station with PS45 Power Supply for ULXD6 & ULXD8 Transmitters

• Shure SBC850: Reliable power supply station.
• Networked charging for ULXD6/ULXD8 transmitters.
• Fast charge times ensure minimal downtime.
• Durable build: Molded plastic, zinc alloy.
• Compact size: Efficient use of studio space.

Used Lectrosonics MCSRXLR 12" TA3F to XLRM Cable for SR Receiver

• Professional-grade Lectrosonics MCSRXLR 12" TA3F to XLRM Cable for superior audio connections
• Designed specifically for use with the SR Receiver and the External Mounting Kit SREXT
• High-quality, durable construction for reliable and secure connection
• Versatile XLRM end adapts to balanced inputs on professional cameras
• Ideal for linking a microphone with an XLR3M connector to a device with a TA3F connector

Used Ambient Recording Coiled 5-Pin Stereo XLR Cable Kit for QX 5100 Quickpole Light Boom Pole (Bottom Outlet)

• Lightweight boom pole kit; coiled XLR cable included.
• Sturdy carbon fiber build for reliable microphone support.
• Adjustable boom pole cable; extends 37.4" to 165.4".
• Easy to use boom pole kit with XLR connectors.
• Excellent grip; coiled cable offers superior management.

Used Countryman 5' H6 Headset Snap-On Cable with Hirose 4-Pin Connector

Used Audio-Technica AT8537 Phantom Power Supply Module for AT898 & AT899 Lavalier Microphones